[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Tlf-devel] Re: TLF AND HAMLIB
From: |
walter giovannini |
Subject: |
[Tlf-devel] Re: TLF AND HAMLIB |
Date: |
Fri, 4 Apr 2003 09:04:41 -0300 |
Yes all the libhamlib are ok and in the correct location
/usr/local/lib.
walter cx7bf
----- Original Message -----
From: "rein couperus PA0RCT" <address@hidden>
To: "walter giovannini" <address@hidden>
Cc: <address@hidden>
Sent: Friday 4 de April de 2003 06:35 AM
Subject: Re: TLF AND HAMLIB
On Thursday 03 April 2003 17:32, you wrote:
> Dear Rein.
>
> 1) i download a tlf and the hamlib.
>
> 2) install the hamlib with
>
> ./configure
> make
> make install
> ldconfig
>
> 3) install the tlf
>
> ./configure --need-hamlib
> make
> make install
>
> 4) Run TLF in a new directory with the confuration file wpx and have a
> message don't open the shared library lib....so.0 not file found ..etc.
I remember having this problem at some point in time, but forgot what I did
to
resolve it.
On my system these libraries are in /usr/local/lib
Can you check if they are there? Look for libhamlib*
>
> 5) install tlf without the hamlib and work fine.
>
> 6) you can helpme i use RedHat 7.2
Anybody from the hamlib community have any ideas?
>
> 7) In the future from SSB contest we have pre-messages like cq , repeat cq
> etc.. using the audio card. ??
I should like to add this in the future.
>
> 8) Another future you have some idea about the interface with terminal
> units like PTC IIe or sound card RTTY software like mgfsk (linux and work
> great with a sound card) to work RTTY contest.
This one is low on the priority list. You can already use tlf as a terminal
for an external tnc ( I use it with a TNC 2), but to link it to the
contesting routines is quite a bit of work (and I work only CW :-)
Maybe somebody steps forward to do this...
(Dreaming is not forbidden :)
>
> best regards and thanks for your time walter giovannini cx7bf
--
--
Email: address@hidden or address@hidden