weechat-support
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Can't compile weechat 3.3


From: ForWeechatSnake
Subject: Re: Can't compile weechat 3.3
Date: Fri, 08 Oct 2021 16:52:55 +0000

Thank you. I resolved this problem by running "Software and updates" and 
enabling to download soft from an every repo.
ps
Sorry, I've never used  mailing list before idk if I need to close this topic 
somehow.

Sent with ProtonMail Secure Email.

‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐

On Friday, October 8th, 2021 at 11:06 PM, Anton Luka Šijanec <anton@sijanec.eu> 
wrote:

> ForWeechatSnake ForWeechatSnake@protonmail.com @ Fri, 08 Oct 2021 15:03:22 
> +0000:
>
> > OS: Ubuntu 16.04.07 LTS (xenial)
> >
> > I want to compile with CMAKE weechat 3.3.
> >
> > So, before it I try to install all dependencies:
> >
> > sudo apt-get build-dep weechat
> > ==============================
> >
> > Reading package lists... Done
> >
> > Reading package lists... Done
> >
> > Building dependency tree
> >
> > Reading state information... Done
> >
> > Some packages could not be installed. This may mean that you have
> >
> > requested an impossible situation or if you are using the unstable
> >
> > distribution that some required packages have not yet been created
> >
> > or been moved out of Incoming.
> >
> > The following information may help to resolve the situation:
> >
> > The following packages have unmet dependencies:
> >
> > builddeps:weechat : Depends: asciidoctor (>= 1.5.4) but it is not 
> > installable
> >
> > Depends: gem2deb but it is not installable
> >
> > Depends: libphp-embed
> >
> > E: Unable to correct problems, you have held broken packages.
>
> This looks like a distribution problem. You can ask on ubuntu IRC channels or 
> ubuntu bug boards. I don't have that specific ubuntu version installed. Do 
> you have any other apt sources in /etc/apt/sources.list? Can you try 
> installing required packages by hand (apt install asciidoctor geb2deb 
> libphp-embed)?
>
> As far as I can remember, ubuntu distributions have some sort of separation 
> of packages, like debian separates non-free, main and contrib. As far as I 
> can see from packages.ubuntu.com, asciidoctor is in the [universe] section, 
> which is not enabled by default. Try to enable it and run apt update 
> afterwards before retrying.
>
> Unfortunately, packages.ubuntu.com does not support your xenial anymore (so 
> much for that LTS), so I can't see at first glance what's going on.
>
> build-dep works on my debian bullseye (though it's quite a frankendebian):
>
> root@ass:/tmp[0]# apt build-dep weechat
>
> Branje seznama paketov ... Narejeno
>
> Branje seznama paketov ... Narejeno
>
> Gradnja drevesa odvisnosti ... Narejeno
>
> Branje podatkov o stanju ... Narejeno
>
> Naslednji paket je bil samodejno nameščen in ni več zahtevan:
>
> libzint2.9
>
> Uporabite 'apt autoremove' za njegovo odstranitev.
>
> Naslednji NOVI paketi bodo nameščeni:
>
> asciidoctor guile-3.0 guile-3.0-dev guile-3.0-libs libargon2-dev 
> libaspell-dev libgc-dev liblua5.3-dev libphp-embed libphp7.4-embed php-dev 
> php7.4-dev ruby-asciidoctor ruby-multi-json ruby-pygments.rb shtool
>
> 0 nadgrajenih, 16 na novo nameščenih, 0 bo odstranjenih in 7 ne nadgrajenih.
>
> Potrebno je dobiti 0 B/10,1 MB arhivov.
>
> Po tem opravilu bo porabljenega 65,3 MB dodatnega prostora.
>
> Ali želite nadaljevati? [Y/n]
>
> Selecting previously unselected package ruby-asciidoctor.
>
> (Reading database ... 580015 files and directories currently installed.)
>
> Preparing to unpack .../00-ruby-asciidoctor_2.0.12-2_all.deb ...
>
> Unpacking ruby-asciidoctor (2.0.12-2) ...
>
> Selecting previously unselected package asciidoctor.
>
> Preparing to unpack .../01-asciidoctor_2.0.12-2_all.deb ...
>
> Unpacking asciidoctor (2.0.12-2) ...
>
> Selecting previously unselected package guile-3.0-libs:i386.
>
> Preparing to unpack .../02-guile-3.0-libs_3.0.5-4_i386.deb ...
>
> Unpacking guile-3.0-libs:i386 (3.0.5-4) ...
>
> Selecting previously unselected package guile-3.0.
>
> Preparing to unpack .../03-guile-3.0_3.0.5-4_i386.deb ...
>
> Unpacking guile-3.0 (3.0.5-4) ...
>
> Selecting previously unselected package libgc-dev:i386.
>
> Preparing to unpack .../04-libgc-dev_1%3a8.0.4-3_i386.deb ...
>
> Unpacking libgc-dev:i386 (1:8.0.4-3) ...
>
> Selecting previously unselected package guile-3.0-dev.
>
> Preparing to unpack .../05-guile-3.0-dev_3.0.5-4_i386.deb ...
>
> Unpacking guile-3.0-dev (3.0.5-4) ...
>
> Selecting previously unselected package libargon2-dev:i386.
>
> Preparing to unpack .../06-libargon2-dev_0~20171227-0.2_i386.deb ...
>
> Unpacking libargon2-dev:i386 (0~20171227-0.2) ...
>
> Selecting previously unselected package libaspell-dev:i386.
>
> Preparing to unpack .../07-libaspell-dev_0.60.8-3_i386.deb ...
>
> Unpacking libaspell-dev:i386 (0.60.8-3) ...
>
> Selecting previously unselected package liblua5.3-dev:i386.
>
> Preparing to unpack .../08-liblua5.3-dev_5.3.3-1.1+b1_i386.deb ...
>
> Unpacking liblua5.3-dev:i386 (5.3.3-1.1+b1) ...
>
> Selecting previously unselected package libphp7.4-embed.
>
> Preparing to unpack .../09-libphp7.4-embed_7.4.21-1+deb11u1_i386.deb ...
>
> Unpacking libphp7.4-embed (7.4.21-1+deb11u1) ...
>
> Selecting previously unselected package libphp-embed.
>
> Preparing to unpack .../10-libphp-embed_2%3a7.4+76_all.deb ...
>
> Unpacking libphp-embed (2:7.4+76) ...
>
> Selecting previously unselected package shtool.
>
> Preparing to unpack .../11-shtool_2.0.8-10_all.deb ...
>
> Unpacking shtool (2.0.8-10) ...
>
> Selecting previously unselected package php7.4-dev.
>
> Preparing to unpack .../12-php7.4-dev_7.4.21-1+deb11u1_i386.deb ...
>
> Unpacking php7.4-dev (7.4.21-1+deb11u1) ...
>
> Selecting previously unselected package php-dev.
>
> Preparing to unpack .../13-php-dev_2%3a7.4+76_all.deb ...
>
> Unpacking php-dev (2:7.4+76) ...
>
> Selecting previously unselected package ruby-multi-json.
>
> Preparing to unpack .../14-ruby-multi-json_1.14.1-1_all.deb ...
>
> Unpacking ruby-multi-json (1.14.1-1) ...
>
> Selecting previously unselected package ruby-pygments.rb.
>
> Preparing to unpack .../15-ruby-pygments.rb_1.2.1-2_all.deb ...
>
> Unpacking ruby-pygments.rb (1.2.1-2) ...
>
> Setting up shtool (2.0.8-10) ...
>
> Setting up ruby-multi-json (1.14.1-1) ...
>
> Setting up liblua5.3-dev:i386 (5.3.3-1.1+b1) ...
>
> Setting up guile-3.0-libs:i386 (3.0.5-4) ...
>
> Setting up libaspell-dev:i386 (0.60.8-3) ...
>
> Setting up libphp7.4-embed (7.4.21-1+deb11u1) ...
>
> update-alternatives: using /usr/lib/libphp7.4.so to provide 
> /usr/lib/libphp7.so (libphp7) in auto mode
>
> Creating config file /etc/php/7.4/embed/php.ini with new version
>
> Setting up ruby-pygments.rb (1.2.1-2) ...
>
> Setting up libphp-embed (2:7.4+76) ...
>
> Setting up php7.4-dev (7.4.21-1+deb11u1) ...
>
> update-alternatives: using /usr/bin/php-config7.4 to provide 
> /usr/bin/php-config (php-config) in auto mode
>
> update-alternatives: using /usr/bin/phpize7.4 to provide /usr/bin/phpize 
> (phpize) in auto mode
>
> Setting up ruby-asciidoctor (2.0.12-2) ...
>
> Setting up asciidoctor (2.0.12-2) ...
>
> Setting up guile-3.0 (3.0.5-4) ...
>
> update-alternatives: using /usr/lib/i386-linux-gnu/guile/3.0/bin/guile to 
> provide /usr/bin/guile (guile) in auto mode
>
> Setting up libargon2-dev:i386 (0~20171227-0.2) ...
>
> Setting up libgc-dev:i386 (1:8.0.4-3) ...
>
> Setting up php-dev (2:7.4+76) ...
>
> update-alternatives: using /usr/bin/php-config.default to provide 
> /usr/bin/php-config (php-config) in auto mode
>
> update-alternatives: using /usr/bin/phpize.default to provide /usr/bin/phpize 
> (phpize) in auto mode
>
> Processing triggers for menu (2.1.48) ...
>
> Processing triggers for libc-bin (2.31-13) ...
>
> Processing triggers for man-db (2.9.4-2) ...
>
> Setting up guile-3.0-dev (3.0.5-4) ...
>
> update-alternatives: using /usr/bin/guile-config-3.0 to provide 
> /usr/bin/guile-config (guile-config) in auto mode
>
> update-alternatives: using /usr/share/aclocal/guile-3.0.m4 to provide 
> /usr/share/aclocal/guile.m4 (guile-autoconf-macros) in auto mode
>
> Processing triggers for libphp7.4-embed (7.4.21-1+deb11u1) ...
>
> Scanning processes...
>
> Scanning processor microcode...
>
> Scanning linux images...
>
> Failed to check for processor microcode upgrades.
>
> No services need to be restarted.
>
> No containers need to be restarted.
>
> No user sessions are running outdated binaries.
>
> root@ass:/tmp[0]#



reply via email to

[Prev in Thread] Current Thread [Next in Thread]