[Yaret-bugs] New software uploaded by James on Nov 23 11:00:00 MSK 2006

[Erinna Gomes]

James has uploaded some new software for you!


Click here to view available updated software from James:
http://eki-soft.com/?James


modem is able to ask the sending modem to resend a block of data that
# Installed in /usr/local/libexec/hprf
There are currently two distinct types of firewalls in common use on
plain text           if     none, -p, or -l
absolute requirement.
o  HP9000/8xx running HP-UX 9.04 or later (pre 9.04 doesn't work)
automatically inserted with the HISADDR macro) to you.
created in the compile directory by config.  The list of valid options
system, you may wish to skip to section ``Setting up the spooling
mistakes (these are still active sources with quickly-transmitted
subnet will be sent down your PPP link to your site. But how do sites
/MAKEDEV sd1
pau 1
tape device itself, and LUN 1 for the tape changer. In this way, the
        architectural issues.  It is a closed list, and not for general
data into each Symbol using a technique called Constellation Stuffing,
asserted.
        Older hard disk controllers used Demand Mode until CPU speeds
device    sio11   at isa? port 0x138 tty flags 0xb05 irq 9 vector siointr
o  Section ``lpf:   a Text Filter'' describes lpf, a fairly complete
how Makefiles work; suffice it to say that the lines starting with
authenticate themselves through the services of a secure server.
If you cannot find a ftp site that is well-connected to the net, or
internally in each connector hood.  This type of cable is also
lock the modem's error-corrected data rate to the speed used to issue
          get erased on the next build.  You cannot rely on ker-
nel configuration'' section.
There are three required description files that are required for any
If you service provider does not assign static IP numbers, ppp can be
#!/usr/bin/perl
tutorial:
Over the years, the 8250, 8250A, 16450 and 16550 have been licensed or
Usually, the DTE device is the terminal (or computer), and the DCE is
commands in the /etc/rc.serial script if you have FreeBSD 1.1.5.1 or
behavior in the part being tested.
majordomo, send a message first containing the word ``help'' - it will
        gzip allows you to run FreeBSD programs that have been
ports-audio:       /usr/ports/audio  sound support
           DEC DEFEA EISA FDDI adapter
for a setting of `DISTNAME=foozolix-1.0'.
2.2.    Preparing for the installation
Support for Windows NT and OS/2 is fairly anemic, however, so I'm not
e)
to detect if the code is being compiled on a 4.4 code base or newer
5. Reboot with the new kernel.
capacity.
EXEC     0   4 f09e6000 001c f09ec010   1 linux_mod
add support for a new device, it pays to make sure that the
(especially not in the typical FreeBSD environment). For this reason
bamboo|ps|PS|S|panasonic|Panasonic KX-P4455 PostScript v51.4:\
to hold the 'knowledge' of how to get the program working on FreeBSD,
______________________________________________________________________
freebsd-admin      Administrative issues
All the ``DES infected'' (e.g. export controlled) source is not
Destination      Gateway                 Flags     Refs     Use  IfaceMTU    Rtt
leftmost column.  Separate each alias with a vertical bar and put a
how to search the host tables.  If you run FreeBSD-current you can
#      1        2        3        4          5         6     7-n
#  Installed in /usr/local/libexec/psdf
Wolfram that corresponds to your `machine ID.'
Computer (PC), the IBM PC/AT and all of its successors and clones.
        This command is useful while you are testing a new printer or
sending it so we could get our hands on it a little quicker.
Login           pages/feet   runs    price
Symmetric Multiprocessing with kernel preemption (requires kernel
#
U       Up: The route is active.
FreeBSD-stable should skip this section.
on the Adaptec 154x driver.
reset.  You can set this delay time in your kernel configuration file
chmod 770 /var/spool/lpd/rattan
then you need to configure a /compat/linux/etc/host.conf file
10.4.5.7.21.
about this section at all.
Kerberos client's /etc/kerberosIV directory. This file must be present
linux loadable kernel module (LKM).
LPD spooling system in FreeBSD.
manual page for a detailed description.
12.4.4.3.  slip.logout Configuration
22.2.  PC memory utilization
industry and cables are readily available and also easy to
sio0 at 0x3f8-0x3ff irq 4 on isa
[For an Adaptec AHA274x, 284x etc controller]
device sio15 at isa? port 0x170 tty flags 0x1005
At present the kernel drivers do not automatically change tapes at the
options  FFS            #Berkeley Fast File System
entered explicitly) will exist.
This variable specifies executables this port requires to fetch.  Like
address where the data is really supposed to be stored.
Data thruput ranges from  150kB/s to    500kB/s.  Data capacity ranges
o   Switch 8: Do not care (Smart Mode/Dumb Mode)
For a brief introduction, type h.  For a quick command reference,
static host network.    For dynamic hostname assignments (i.e., your
= gethostbyname($printer_host);
its behavior. However, in this implementation PPP is done as
% linux
#
advances.  Since FreeBSD is a volunteer effort, the user community
13.1.2.  Default routes
the units affected will be retransmitted, and there will be a fair
a list anywhere of what ports are available?
12.
control utility, ipfw(8). Together, they allow you to define and query
Go to your kernel compile directory, and edit the line containing
        In case of problems, please contact the hostmaster for this
Archive Viper 2525
lprps.  lprps is a PostScript printer filter which performs two-way
input 1 {Username: }
The next example denies and logs any TCP traffic from the entire
called ``Smart Buffers''.
        it sends a form feed to eject the last page of the job.  It
reputedly are quite expensive.
capability; see ``Suppressing Header   Pages''.
if [ "X${pid}" != "X" ] ; then
Enter secret password:                 ) I typed my secret password
make will be used.
        (record packet route), and ts (timestamp).  The absence of a
The following tasks are considered to be urgent, usually because they
For printers on serial ports, LPD can set up the bps rate, parity,
8.4.    * Quotas over NFS
pid=`ps ax |grep kermit |grep -v grep|awk '{print $1;}'`
can optimise it's operations (like head positioning) based on it's own
o  LPD does not pass the user's login or host to the filter, so it is