[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Freeipmi-devel] Trouble w/ HP ProLiant and FreeIPMI (ipm
|
From: |
Gregor Dschung |
|
Subject: |
Re: [Freeipmi-devel] Trouble w/ HP ProLiant and FreeIPMI (ipmi-sensors) |
|
Date: |
Fri, 5 Oct 2007 11:32:01 +0200 (CEST) |
|
User-agent: |
SquirrelMail/1.4.6 |
Hi Al,
thanks for your fast answer.
I've tested your test-version and it seems to be on the correct way. It
still crashes, but now I get sensor-data :) :
----------
p300slg01:/usr/local/src/freeipmi-0.4.5.test # ipmi-sensors -h
gtseval-ipmi -u ADMIN -P
Password:
64: ACPI State (ACPI Power State): [S0/G0 "working"]
112: System Reset (Module/Board): [OK]
160: POST Error (System Firmware): [Unknown]
208: Memory ECC (Memory): [Unknown]
256: PCI Error (Critical Interrupt): [Unknown]
304: Fan Error (Cooling Device): [Unknown]
352: Watchdog (Watchdog 2): [Unknown]
400: CPU Fan 1 (Fan): 9592.33 RPM (NA/3475.48): [OK]
464: CPU Fan 2 (Fan): 19984.01 RPM (NA/3475.48): [OK]
528: CPU Fan 3 (Fan): 9992.01 RPM (NA/3475.48): [OK]
592: CPU Fan 4 (Fan): 10426.44 RPM (NA/3475.48): [OK]
656: CPU Fan 5 (Fan): 9592.33 RPM (NA/3475.48): [OK]
720: CPU Fan 6 (Fan): 10426.44 RPM (NA/3475.48): [OK]
784: CPU Fan 7 (Fan): 10426.44 RPM (NA/3475.48): [OK]
848: CPU Fan 8 (Fan): 10426.44 RPM (NA/3475.48): [OK]
912: CPU Fan 9 (Fan): 9592.33 RPM (NA/3475.48): [OK]
976: CPU Fan 10 (Fan): 10900.37 RPM (NA/3475.48): [OK]
1040: System Fan 1 (Fan): 9592.33 RPM (NA/3475.48): [OK]
1104: System Fan 2 (Fan): 10900.37 RPM (NA/3475.48): [OK]
1168: CPU0 Vcore (Voltage): 1.11 V (0.40/1.70): [OK]
1232: CPU1 Vcore (Voltage): 0.80 V (0.40/1.70): [OK]
1296: Standby 5V (Voltage): 4.97 V (4.26/5.79): [OK]
1360: System 5V (Voltage): 4.85 V (4.26/5.79): [OK]
1424: System 3.3V (Voltage): 3.23 V (2.82/3.85): [OK]
1488: 3V CMOS Sense (Voltage): 3.03 V (2.62/NA): [OK]
1680: CPU0 Therm Diode (Temperature): 42.00 C (10.00/80.00): [OK]
1744: CPU1 Therm Diode (Temperature): 42.00 C (10.00/80.00): [OK]
1808: CPU0 ThermDiode2 (Temperature): 42.00 C (10.00/80.00): [OK]
1872: CPU1 ThermDiode2 (Temperature): 42.00 C (10.00/80.00): [OK]
1936: AMB Temp (Temperature): 28.00 C (10.00/50.00): [OK]
2064: MultiBit ECC ER (Module/Board): [State Deasserted]
2112: VDD Power Fail (Power Supply): [State Deasserted]
2160: Reset (Button): [State Deasserted]
2208: Identify (Button): [State Deasserted]
2304: NMI (Button): [State Deasserted]
2352: CPU0 Therm-Trip (Processor): [State Deasserted]
2400: CPU1 Therm-Trip (Processor): [State Deasserted]
2448: CPU0 IERR (Processor): [State Deasserted]
2496: CPU1 IERR (Processor): [State Deasserted]
2544: CPU0 Prochot (Temperature): [Limit Not Exceeded]
2592: CPU1 Prochot (Temperature): [Limit Not Exceeded]
2640: CPU0 SocketOcc (Processor): [Device Inserted/Device Present]
2688: CPU1 SocketOcc (Processor): [Device Removed/Device Absent]
2736: CPU0 Dmn 0 Temp (Temperature): 44.00 C (NA/85.00): [OK]
2864: CPU1 Dmn 0 Temp (Temperature): 44.00 C (NA/85.00): [OK]
3248: CPU0 Dmn 1 Temp (Temperature): 44.00 C (NA/85.00): [OK]
3440: CPU1 Dmn 1 Temp (Temperature): 44.00 C (NA/85.00): [OK]
*** glibc detected *** ipmi-sensors: double free or corruption (!prev):
0x080b69f0 ***
======= Backtrace: =========
/lib/libc.so.6[0xb7cbc911]
/lib/libc.so.6(__libc_free+0x84)[0xb7cbdf84]
[...]
-----------
I'll attach the output of the call with --debug. I don't know, but
perhaps, it has to do with the sensors which has the state "Unknown".
Cause, when I call ipmi-sensors or ipmitool local it doesn't crash.
Regards,
Gregor
PS: I resend my last mail, because I forget to change my email-address in
the webmail-frontend I use at home. So the mail was rejected by the
mailinglist.
> Hey Gregor,
>
> I found a piece of code that tries to free questional memory. Not sure
> why anyone hasn't seen it yet :-). Since I'm not 100% sure this could be
> the problem, I also went ahead and added a whole bunch of printf's in
> there anyways for good measure if this isn't the problem. Could you try
> out the attached tar.gz?
>
> If it doesn't work, could you send me the output again running --debug?
>
> Thanks,
> Al
>
>> Hi Al,
>>
>> sorry, I forgot to mention that I've used FreeIPMI 0.4.3.
>> Now, I've compiled the new 0.4.5 with the debug-flag. That's the whole
>> output:
>>
>> -------------
>> p300slg01:/usr # ipmi-sensors -h gtseval-ipmi -u ADMIN -P --debug
>> Password:
>> RMCP Header:
>> ------------
>> [ 6h] = version[ 8b]
>> [ 0h] = reserved[ 8b]
>> [ FFh] = sequence_number[ 8b]
>> [ 7h] = message_class.class[ 5b]
>> [ 0h] = message_class.reserved[ 2b]
>> [ 0h] = message_class.ack[ 1b]
>> IPMI Session Header:
>> --------------------
>> [ 0h] = authentication_type[ 8b]
>> [ 0h] = session_sequence_number[32b]
>> [ 0h] = session_id[32b]
>> IPMI Message Header:
>> --------------------
>> [ 20h] = rs_addr[ 8b]
>> [ 0h] = rs_lun[ 2b]
>> [ 6h] = net_fn[ 6b]
>> [ C8h] = checksum1[ 8b]
>> [ 81h] = rq_addr[ 8b]
>> [ 0h] = rq_lun[ 2b]
>> [ 0h] = rq_seq[ 6b]
>> IPMI Command Data:
>> ------------------
>> [ 38h] = cmd[ 8b]
>> [ Eh] = channel_number[ 4b]
>> [ 0h] = reserved1[ 4b]
>> [ 2h] = maximum_privilege_level[ 4b]
>> [ 0h] = reserved2[ 4b]
>> RMCP Header:
>> ------------
>> [ 6h] = version[ 8b]
>> [ 0h] = reserved[ 8b]
>> [ FFh] = sequence_number[ 8b]
>> [ 7h] = message_class.class[ 5b]
>> [ 0h] = message_class.reserved[ 2b]
>> [ 0h] = message_class.ack[ 1b]
>> IPMI Session Header:
>> --------------------
>> [ 0h] = authentication_type[ 8b]
>> [ 0h] = session_sequence_number[32b]
>> [ 0h] = session_id[32b]
>> [ 10h] = ipmi_msg_len[ 8b]
>> IPMI Message Header:
>> --------------------
>> [ 81h] = rq_addr[ 8b]
>> [ 0h] = rq_lun[ 2b]
>> [ 7h] = net_fn[ 6b]
>> [ 63h] = checksum1[ 8b]
>> [ 20h] = rs_addr[ 8b]
>> [ 0h] = rs_lun[ 2b]
>> [ 0h] = rq_seq[ 6b]
>> IPMI Command Data:
>> ------------------
>> [ 38h] = cmd[ 8b]
>> [ 0h] = comp_code[ 8b]
>> [ 2h] = channel_number[ 8b]
>> [ 1h] = authentication_type.none[ 1b]
>> [ 0h] = authentication_type.md2[ 1b]
>> [ 1h] = authentication_type.md5[ 1b]
>> [ 0h] = authentication_type.reserved1[ 1b]
>> [ 1h] = authentication_type.straight_password_key[ 1b]
>> [ 0h] = authentication_type.oem_prop[ 1b]
>> [ 0h] = authentication_type.reserved2[ 2b]
>> [ 0h] = authentication_status.anonymous_login[ 1b]
>> [ 0h] = authentication_status.null_username[ 1b]
>> [ 1h] = authentication_status.non_null_username[ 1b]
>> [ 0h] = authentication_status.user_level_authentication[
>> 1b]
>> [ 0h] = authentication_status.per_message_authentication[
>> 1b]
>> [ 0h] = authentication_status.reserved[ 3b]
>> [ 0h] = reserved1[ 8b]
>> [ 0h] = oem_id[24b]
>> [ 0h] = oem_auxiliary_data[ 8b]
>> IPMI Trailer:
>> --------------
>> [ 8Dh] = checksum2[ 8b]
>> RMCP Header:
>> ------------
>> [ 6h] = version[ 8b]
>> [ 0h] = reserved[ 8b]
>> [ FFh] = sequence_number[ 8b]
>> [ 7h] = message_class.class[ 5b]
>> [ 0h] = message_class.reserved[ 2b]
>> [ 0h] = message_class.ack[ 1b]
>> IPMI Session Header:
>> --------------------
>> [ 0h] = authentication_type[ 8b]
>> [ 0h] = session_sequence_number[32b]
>> [ 0h] = session_id[32b]
>> IPMI Message Header:
>> --------------------
>> [ 20h] = rs_addr[ 8b]
>> [ 0h] = rs_lun[ 2b]
>> [ 6h] = net_fn[ 6b]
>> [ C8h] = checksum1[ 8b]
>> [ 81h] = rq_addr[ 8b]
>> [ 0h] = rq_lun[ 2b]
>> [ 0h] = rq_seq[ 6b]
>> IPMI Command Data:
>> ------------------
>> [ 39h] = cmd[ 8b]
>> [ 2h] = authentication_type[ 4b]
>> [ 0h] = reserved[ 4b]
>> [ BYTE ARRAY ... ] = user_name[16B]
>> [ 41h 44h 4Dh 49h 4Eh 00h 00h 00h ]
>> [ 00h 00h 00h 00h 00h 00h 00h 00h ]
>> RMCP Header:
>> ------------
>> [ 6h] = version[ 8b]
>> [ 0h] = reserved[ 8b]
>> [ FFh] = sequence_number[ 8b]
>> [ 7h] = message_class.class[ 5b]
>> [ 0h] = message_class.reserved[ 2b]
>> [ 0h] = message_class.ack[ 1b]
>> IPMI Session Header:
>> --------------------
>> [ 0h] = authentication_type[ 8b]
>> [ 0h] = session_sequence_number[32b]
>> [ 0h] = session_id[32b]
>> [ 1Ch] = ipmi_msg_len[ 8b]
>> IPMI Message Header:
>> --------------------
>> [ 81h] = rq_addr[ 8b]
>> [ 0h] = rq_lun[ 2b]
>> [ 7h] = net_fn[ 6b]
>> [ 63h] = checksum1[ 8b]
>> [ 20h] = rs_addr[ 8b]
>> [ 0h] = rs_lun[ 2b]
>> [ 0h] = rq_seq[ 6b]
>> IPMI Command Data:
>> ------------------
>> [ 39h] = cmd[ 8b]
>> [ 0h] = comp_code[ 8b]
>> [ ED619F5h] = temp_session_id[32b]
>> [ BYTE ARRAY ... ] = challenge_string[16B]
>> [ DAh 1Bh C9h 77h 5Eh 70h 6Bh 1Ah ]
>> [ 36h 75h 33h 03h E9h 52h 48h 43h ]
>> IPMI Trailer:
>> --------------
>> [ 86h] = checksum2[ 8b]
>> RMCP Header:
>> ------------
>> [ 6h] = version[ 8b]
>> [ 0h] = reserved[ 8b]
>> [ FFh] = sequence_number[ 8b]
>> [ 7h] = message_class.class[ 5b]
>> [ 0h] = message_class.reserved[ 2b]
>> [ 0h] = message_class.ack[ 1b]
>> IPMI Session Header:
>> --------------------
>> [ 2h] = authentication_type[ 8b]
>> [ 0h] = session_sequence_number[32b]
>> [ ED619F5h] = session_id[32b]
>> IPMI Message Header:
>> --------------------
>> [ 20h] = rs_addr[ 8b]
>> [ 0h] = rs_lun[ 2b]
>> [ 6h] = net_fn[ 6b]
>> [ C8h] = checksum1[ 8b]
>> [ 81h] = rq_addr[ 8b]
>> [ 0h] = rq_lun[ 2b]
>> [ 0h] = rq_seq[ 6b]
>> IPMI Command Data:
>> ------------------
>> [ 3Ah] = cmd[ 8b]
>> [ 2h] = authentication_type[ 4b]
>> [ 0h] = reserved1[ 4b]
>> [ 2h] = maximum_privilege_level[ 4b]
>> [ 0h] = reserved2[ 4b]
>> [ BYTE ARRAY ... ] = challenge_string[16B]
>> [ DAh 1Bh C9h 77h 5Eh 70h 6Bh 1Ah ]
>> [ 36h 75h 33h 03h E9h 52h 48h 43h ]
>> [ 5E1FBADDh] = initial_outbound_sequence_number[32b]
>> RMCP Header:
>> ------------
>> [ 6h] = version[ 8b]
>> [ 0h] = reserved[ 8b]
>> [ FFh] = sequence_number[ 8b]
>> [ 7h] = message_class.class[ 5b]
>> [ 0h] = message_class.reserved[ 2b]
>> [ 0h] = message_class.ack[ 1b]
>> IPMI Session Header:
>> --------------------
>> [ 2h] = authentication_type[ 8b]
>> [ 5E1FBADDh] = session_sequence_number[32b]
>> [ ED619F5h] = session_id[32b]
>> [ BYTE ARRAY ... ] = authentication_code[16B]
>> [ FDh 94h 54h 89h AAh 47h 4Eh A7h ]
>> [ CEh AFh BBh 6Ch 2Ah ABh 7Ch 5Dh ]
>> [ 12h] = ipmi_msg_len[ 8b]
>> IPMI Message Header:
>> --------------------
>> [ 81h] = rq_addr[ 8b]
>> [ 0h] = rq_lun[ 2b]
>> [ 7h] = net_fn[ 6b]
>> [ 63h] = checksum1[ 8b]
>> [ 20h] = rs_addr[ 8b]
>> [ 0h] = rs_lun[ 2b]
>> [ 0h] = rq_seq[ 6b]
>> IPMI Command Data:
>> ------------------
>> [ 3Ah] = cmd[ 8b]
>> [ 0h] = comp_code[ 8b]
>> [ 2h] = authentication_type[ 4b]
>> [ 0h] = reserved1[ 4b]
>> [ ED619F5h] = session_id[32b]
>> [ 1h] = initial_inbound_sequence_number[32b]
>> [ 2h] = maximum_privilege_level[ 4b]
>> [ 0h] = reserved2[ 4b]
>> IPMI Trailer:
>> --------------
>> [ AFh] = checksum2[ 8b]
>> RMCP Header:
>> ------------
>> [ 6h] = version[ 8b]
>> [ 0h] = reserved[ 8b]
>> [ FFh] = sequence_number[ 8b]
>> [ 7h] = message_class.class[ 5b]
>> [ 0h] = message_class.reserved[ 2b]
>> [ 0h] = message_class.ack[ 1b]
>> IPMI Session Header:
>> --------------------
>> [ 2h] = authentication_type[ 8b]
>> [ 1h] = session_sequence_number[32b]
>> [ ED619F5h] = session_id[32b]
>> IPMI Message Header:
>> --------------------
>> [ 20h] = rs_addr[ 8b]
>> [ 0h] = rs_lun[ 2b]
>> [ 6h] = net_fn[ 6b]
>> [ C8h] = checksum1[ 8b]
>> [ 81h] = rq_addr[ 8b]
>> [ 0h] = rq_lun[ 2b]
>> [ 1h] = rq_seq[ 6b]
>> IPMI Command Data:
>> ------------------
>> [ 3Bh] = cmd[ 8b]
>> [ 2h] = privilege_level[ 4b]
>> [ 0h] = reserved1[ 4b]
>> RMCP Header:
>> ------------
>> [ 6h] = version[ 8b]
>> [ 0h] = reserved[ 8b]
>> [ FFh] = sequence_number[ 8b]
>> [ 7h] = message_class.class[ 5b]
>> [ 0h] = message_class.reserved[ 2b]
>> [ 0h] = message_class.ack[ 1b]
>> IPMI Session Header:
>> --------------------
>> [ 2h] = authentication_type[ 8b]
>> [ 5E1FBADEh] = session_sequence_number[32b]
>> [ ED619F5h] = session_id[32b]
>> [ BYTE ARRAY ... ] = authentication_code[16B]
>> [ C2h 8Eh E6h ABh 61h 31h 07h 2Dh ]
>> [ F2h CFh 35h 97h 7Ch DDh 0Ch 34h ]
>> [ 9h] = ipmi_msg_len[ 8b]
>> IPMI Message Header:
>> --------------------
>> [ 81h] = rq_addr[ 8b]
>> [ 0h] = rq_lun[ 2b]
>> [ 7h] = net_fn[ 6b]
>> [ 63h] = checksum1[ 8b]
>> [ 20h] = rs_addr[ 8b]
>> [ 0h] = rs_lun[ 2b]
>> [ 1h] = rq_seq[ 6b]
>> IPMI Command Data:
>> ------------------
>> [ 3Bh] = cmd[ 8b]
>> [ 0h] = comp_code[ 8b]
>> [ 2h] = privilege_level[ 4b]
>> [ 0h] = reserved1[ 4b]
>> IPMI Trailer:
>> --------------
>> [ 9Fh] = checksum2[ 8b]
>> RMCP Header:
>> ------------
>> [ 6h] = version[ 8b]
>> [ 0h] = reserved[ 8b]
>> [ FFh] = sequence_number[ 8b]
>> [ 7h] = message_class.class[ 5b]
>> [ 0h] = message_class.reserved[ 2b]
>> [ 0h] = message_class.ack[ 1b]
>> IPMI Session Header:
>> --------------------
>> [ 2h] = authentication_type[ 8b]
>> [ 2h] = session_sequence_number[32b]
>> [ ED619F5h] = session_id[32b]
>> IPMI Message Header:
>> --------------------
>> [ 20h] = rs_addr[ 8b]
>> [ 0h] = rs_lun[ 2b]
>> [ Ah] = net_fn[ 6b]
>> [ B8h] = checksum1[ 8b]
>> [ 81h] = rq_addr[ 8b]
>> [ 0h] = rq_lun[ 2b]
>> [ 2h] = rq_seq[ 6b]
>> IPMI Command Data:
>> ------------------
>> [ 20h] = cmd[ 8b]
>> RMCP Header:
>> ------------
>> [ 6h] = version[ 8b]
>> [ 0h] = reserved[ 8b]
>> [ FFh] = sequence_number[ 8b]
>> [ 7h] = message_class.class[ 5b]
>> [ 0h] = message_class.reserved[ 2b]
>> [ 0h] = message_class.ack[ 1b]
>> IPMI Session Header:
>> --------------------
>> [ 2h] = authentication_type[ 8b]
>> [ 5E1FBADFh] = session_sequence_number[32b]
>> [ ED619F5h] = session_id[32b]
>> [ BYTE ARRAY ... ] = authentication_code[16B]
>> [ A5h 23h DBh 0Bh 77h BBh 41h 21h ]
>> [ 63h F1h 3Ch 48h CDh 8Eh EBh 36h ]
>> [ 16h] = ipmi_msg_len[ 8b]
>> IPMI Message Header:
>> --------------------
>> [ 81h] = rq_addr[ 8b]
>> [ 0h] = rq_lun[ 2b]
>> [ Bh] = net_fn[ 6b]
>> [ 53h] = checksum1[ 8b]
>> [ 20h] = rs_addr[ 8b]
>> [ 0h] = rs_lun[ 2b]
>> [ 2h] = rq_seq[ 6b]
>> IPMI Command Data:
>> ------------------
>> [ 20h] = cmd[ 8b]
>> [ 0h] = comp_code[ 8b]
>> [ 1h] = sdr_version_major[ 4b]
>> [ 5h] = sdr_version_minor[ 4b]
>> [ B7h] = record_count[16b]
>> [ 13E0h] = free_space[16b]
>> [ 6h] = most_recent_addition_timestamp[32b]
>> [ 0h] = most_recent_erase_timestamp[32b]
>> [ 1h] =
>> get_sdr_repository_allocation_info_command_supported[ 1b]
>> [ 1h] = reserve_sdr_repository_command_supported[ 1b]
>> [ 1h] = partial_add_sdr_command_supported[ 1b]
>> [ 1h] = delete_sdr_command_supported[ 1b]
>> [ 0h] = reserved[ 1b]
>> [ 1h] =
>> modal_non_modal_sdr_repository_update_operation_supported[ 2b]
>> [ 0h] = overflow_flag[ 1b]
>> IPMI Trailer:
>> --------------
>> [ 88h] = checksum2[ 8b]
>> *** glibc detected *** ipmi-sensors: free(): invalid pointer: 0x0807e698
>> ***
>> ======= Backtrace: =========
>> /lib/libc.so.6[0xb7bf1911]
>> /lib/libc.so.6(__libc_free+0x84)[0xb7bf2f84]
>> ipmi-sensors[0x8056566]
>> ipmi-sensors[0x80566ad]
>> ipmi-sensors[0x804bae8]
>> ipmi-sensors[0x804bc7f]
>> ipmi-sensors[0x805dea5]
>> ipmi-sensors[0x804bda5]
>> /lib/libc.so.6(__libc_start_main+0xdc)[0xb7ba387c]
>> ipmi-sensors[0x804a4f1]
>> ======= Memory map: ========
>> 08048000-08073000 r-xp 00000000 08:04 902466
>> /usr/local/sbin/ipmi-sensors
>> 08073000-08074000 rw-p 0002b000 08:04 902466
>> /usr/local/sbin/ipmi-sensors
>> 08074000-08096000 rw-p 08074000 00:00 0 [heap]
>> b7a00000-b7a21000 rw-p b7a00000 00:00 0
>> b7a21000-b7b00000 ---p b7a21000 00:00 0
>> b7b16000-b7b20000 r-xp 00000000 08:04 16403 /lib/libgcc_s.so.1
>> b7b20000-b7b21000 rw-p 00009000 08:04 16403 /lib/libgcc_s.so.1
>> b7b56000-b7b57000 rw-p b7b56000 00:00 0
>> b7b57000-b7b8c000 r--s 00000000 08:04 233346 /var/run/nscd/passwd
>> b7b8c000-b7b8e000 rw-p b7b8c000 00:00 0
>> b7b8e000-b7ca7000 r-xp 00000000 08:04 16361 /lib/libc-2.4.so
>> b7ca7000-b7ca9000 r--p 00118000 08:04 16361 /lib/libc-2.4.so
>> b7ca9000-b7cab000 rw-p 0011a000 08:04 16361 /lib/libc-2.4.so
>> b7cab000-b7cae000 rw-p b7cab000 00:00 0
>> b7cae000-b7cd1000 r-xp 00000000 08:04 16369 /lib/libm-2.4.so
>> b7cd1000-b7cd3000 rw-p 00022000 08:04 16369 /lib/libm-2.4.so
>> b7cd3000-b7ce4000 r-xp 00000000 08:04 16372 /lib/libnsl-2.4.so
>> b7ce4000-b7ce6000 rw-p 00010000 08:04 16372 /lib/libnsl-2.4.so
>> b7ce6000-b7ce8000 rw-p b7ce6000 00:00 0
>> b7ce8000-b7ceb000 r-xp 00000000 08:04 1619810
>> /usr/lib/libgpg-error.so.0.1.3
>> b7ceb000-b7cec000 rw-p 00002000 08:04 1619810
>> /usr/lib/libgpg-error.so.0.1.3
>> b7cec000-b7ced000 rw-p b7cec000 00:00 0
>> b7cec000-b7ced000 rw-p b7cec000 00:00 0
>> b7ced000-b7d3b000 r-xp 00000000 08:04 260935
>> /usr/lib/libgcrypt.so.11.2.1
>> b7d3b000-b7d3d000 rw-p 0004d000 08:04 260935
>> /usr/lib/libgcrypt.so.11.2.1
>> b7d3d000-b7de7000 r-xp 00000000 08:04 490663
>> /usr/lib/libfreeipmi.so.4.0.0
>> b7de7000-b7ec1000 rw-p 000aa000 08:04 490663
>> /usr/lib/libfreeipmi.so.4.0.0
>> b7ec1000-b7ece000 r-xp 00000000 08:04 490693
>> /usr/lib/libipmidetect.so.0.0.0
>> b7ece000-b7ecf000 rw-p 0000c000 08:04 490693
>> /usr/lib/libipmidetect.so.0.0.0
>> b7ecf000-b7edf000 r-xp 00000000 08:04 16387 /lib/libpthread-2.4.so
>> b7edf000-b7ee1000 rw-p 0000f000 08:04 16387 /lib/libpthread-2.4.so
>> b7ee1000-b7ee3000 rw-p b7ee1000 00:00 0
>> b7ee3000-b7f18000 r--s 00000000 08:04 233536 /var/run/nscd/dbTnE5h2
>> (deleted)
>> b7f18000-b7f19000 rw-p b7f18000 00:00 0
>> b7f19000-b7f33000 r-xp 00000000 08:04 16354 /lib/ld-2.4.so
>> b7f33000-b7f35000 rw-p 00019000 08:04 16354 /lib/ld-2.4.so
>> bff94000-bffba000 rw-p bff94000 00:00 0 [stack]
>> ffffe000-fffff000 ---p 00000000 00:00 0 [vdso]
>> Aborted
>> p300slg01:/usr #
>> ---------------
>>
>> I hope, you can do something with this information :).
>>
>> Regards && Thanks,
>> Gregor
>>
>>
>>> Hey Greg,
>>>
>>> Is this with FreeIPMI 0.4.X? I'm not 100% sure of the issue skimming
>>> code real quick. Could you try with the debug rpms
>>> (ftp://ftp.zresearch.com/pub/freeipmi/0.4.5.debug/) and running with
>>> the
>>> --debug option? Or if you compiled yourself running ./configure with
>>> --
>>> enable-debug?
>>>
>>> Thanks,
>>>
>>> Al
>>>
>>> On Thu, 2007-10-04 at 14:05 +0200, Gregor Dschung wrote:
>>>> Hi,
>>>>
>>>> I'm trying to read sensor-data with ipmi-sensors from an HP ProLiant
>>>> DL140G3, but everytime it crashes.
>>>>
>>>> Even if I read the data with ipmitool, I'll get warnings (I mailed
>>>> this
>>>> issue already on the ipmitool mailing list).
>>>>
>>>> I'm not good in debugging such issues, so I hope you can help me.
>>>>
>>>> ---------
>>>> p300slg01:~/.freeipmi/sdr-cache # ipmi-sensors -h gtseval-ipmi -u
>>>> ADMIN
>>>> -P
>>>> Password:
>>>> *** glibc detected *** ipmi-sensors: free(): invalid pointer:
>>>> 0x0806d680
>>>> ***
>>>> ======= Backtrace: =========
>>>> /lib/libc.so.6[0xb7c2e911]
>>>> /lib/libc.so.6(__libc_free+0x84)[0xb7c2ff84]
>>>> ipmi-sensors[0x805258a]
>>>> ipmi-sensors[0x805269f]
>>>> ipmi-sensors[0x804b394]
>>>> ipmi-sensors[0x804b4fb]
>>>> ipmi-sensors[0x8056b7f]
>>>> ipmi-sensors[0x804b606]
>>>> /lib/libc.so.6(__libc_start_main+0xdc)[0xb7be087c]
>>>> ipmi-sensors[0x804a561]
>>>> ======= Memory map: ========
>>>> 08048000-08062000 r-xp 00000000 08:04 40170
>>>> /usr/sbin/ipmi-sensors
>>>> 08062000-08063000 rw-p 0001a000 08:04 40170
>>>> /usr/sbin/ipmi-sensors
>>>> 08063000-08085000 rw-p 08063000 00:00 0 [heap]
>>>> b7a00000-b7a21000 rw-p b7a00000 00:00 0
>>>> b7a21000-b7b00000 ---p b7a21000 00:00 0
>>>> b7b3a000-b7b44000 r-xp 00000000 08:04 16403 /lib/libgcc_s.so.1
>>>> b7b44000-b7b45000 rw-p 00009000 08:04 16403 /lib/libgcc_s.so.1
>>>> b7b7a000-b7b7b000 rw-p b7b7a000 00:00 0
>>>> b7b7b000-b7bb0000 r--s 00000000 08:04 233346 /var/run/nscd/passwd
>>>> b7bb0000-b7bb2000 rw-p b7bb0000 00:00 0
>>>> b7bb2000-b7bc3000 r-xp 00000000 08:04 16372 /lib/libnsl-2.4.so
>>>> b7bc3000-b7bc5000 rw-p 00010000 08:04 16372 /lib/libnsl-2.4.so
>>>> b7bc5000-b7bc7000 rw-p b7bc5000 00:00 0
>>>> b7bc7000-b7bca000 r-xp 00000000 08:04 1619810
>>>> /usr/lib/libgpg-error.so.0.1.3
>>>> b7bca000-b7bcb000 rw-p 00002000 08:04 1619810
>>>> /usr/lib/libgpg-error.so.0.1.3
>>>> b7bcb000-b7ce4000 r-xp 00000000 08:04 16361 /lib/libc-2.4.so
>>>> b7ce4000-b7ce6000 r--p 00118000 08:04 16361 /lib/libc-2.4.so
>>>> b7ce6000-b7ce8000 rw-p 0011a000 08:04 16361 /lib/libc-2.4.so
>>>> b7ce8000-b7ceb000 rw-p b7ce8000 00:00 0
>>>> b7ceb000-b7d0e000 r-xp 00000000 08:04 16369 /lib/libm-2.4.so
>>>> b7d0e000-b7d10000 rw-p 00022000 08:04 16369 /lib/libm-2.4.so
>>>> b7d10000-b7d11000 rw-p b7d10000 00:00 0
>>>> b7d11000-b7d5f000 r-xp 00000000 08:04 260935
>>>> /usr/lib/libgcrypt.so.11.2.1
>>>> b7d5f000-b7d61000 rw-p 0004d000 08:04 260935
>>>> /usr/lib/libgcrypt.so.11.2.1
>>>> b7d61000-b7dd7000 r-xp 00000000 08:04 364978
>>>> /usr/lib/libfreeipmi.so.4.0.0
>>>> b7dd7000-b7eb1000 rw-p 00075000 08:04 364978
>>>> /usr/lib/libfreeipmi.so.4.0.0
>>>> b7eb1000-b7eb8000 r-xp 00000000 08:04 488969
>>>> /usr/lib/libipmidetect.so.0.0.0
>>>> b7eb8000-b7eb9000 rw-p 00007000 08:04 488969
>>>> /usr/lib/libipmidetect.so.0.0.0
>>>> b7eb9000-b7ec9000 r-xp 00000000 08:04 16387
>>>> /lib/libpthread-2.4.so
>>>> b7ec9000-b7ecb000 rw-p 0000f000 08:04 16387
>>>> /lib/libpthread-2.4.so
>>>> b7ecb000-b7ecd000 rw-p b7ecb000 00:00 0
>>>> b7ecd000-b7f02000 r--s 00000000 08:04 233536
>>>> /var/run/nscd/dbTnE5h2
>>>> (deleted)
>>>> b7f02000-b7f03000 rw-p b7f02000 00:00 0
>>>> b7f03000-b7f1d000 r-xp 00000000 08:04 16354 /lib/ld-2.4.so
>>>> b7f1d000-b7f1f000 rw-p 00019000 08:04 16354 /lib/ld-2.4.so
>>>> bf894000-bf8b7000 rw-p bf894000 00:00 0 [stack]
>>>> ffffe000-fffff000 ---p 00000000 00:00 0 [vdso]
>>>> Aborted
>>>> p300slg01:~/.freeipmi/sdr-cache #
>>>> -----------
>>>>
>>>> Even with the parameter -l ADMIN to force the privilege level to
>>>> admin,
>>>> I'll getting the same output. With other servers (Supermicro) the tool
>>>> works fine.
>>>>
>>>> Regards,
>>>> Gregor
>>>>
>>> --
>>> Albert Chu
>>> address@hidden
>>> 925-422-5311
>>> Computer Scientist
>>> High Performance Systems Division
>>> Lawrence Livermore National Laboratory
>>>
>>
>
>
> --
> Albert Chu
> address@hidden
> 925-422-5311
> Computer Scientist
> High Performance Systems Division
> Lawrence Livermore National Laboratory
>
ipmi-sensors.debug
Description: Binary data
- [Freeipmi-devel] Trouble w/ HP ProLiant and FreeIPMI (ipmi-sensors), Gregor Dschung, 2007/10/04
- Re: [Freeipmi-devel] Trouble w/ HP ProLiant and FreeIPMI (ipmi-sensors), Al Chu, 2007/10/04
- Message not available
- Message not available
- Re: [Freeipmi-devel] Trouble w/ HP ProLiant and FreeIPMI (ipmi-sensors),
Gregor Dschung <=
- Message not available
- Re: [Freeipmi-devel] Trouble w/ HP ProLiant and FreeIPMI (ipmi-sensors), Gregor Dschung, 2007/10/07
- Re: [Freeipmi-devel] Trouble w/ HP ProLiant and FreeIPMI (ipmi-sensors), Al Chu, 2007/10/08
- Message not available
- Message not available
- Re: [Freeipmi-devel] Trouble w/ HP ProLiant and FreeIPMI (ipmi-sensors), Gregor Dschung, 2007/10/09
- Re: [Freeipmi-devel] Trouble w/ HP ProLiant and FreeIPMI (ipmi-sensors), Al Chu, 2007/10/09
- Message not available
- Message not available
- Message not available
- Message not available
- Re: [Freeipmi-devel] Trouble w/ HP ProLiant and FreeIPMI (ipmi-sensors), Al Chu, 2007/10/10
- Re: [Freeipmi-devel] Trouble w/ HP ProLiant and FreeIPMI (ipmi-sensors), Al Chu, 2007/10/10