freeipmi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Freeipmi-devel] ipmi-sensor on processor group: No Result


From: Anand Babu Periasamy
Subject: Re: [Freeipmi-devel] ipmi-sensor on processor group: No Result
Date: Fri, 12 Oct 2007 10:19:54 -0700

What is your mother board model number?
--
Anand Babu Periasamy
GPG Key ID: 0x62E15A31
Blog [http://ab.freeshell.org]
The GNU Operating System [http://www.gnu.org]

Sharad Chandra writes:

Hi,

Can you please tell the step to upgrade or any link on net? What is latest firmware version and where to find it.
1 more thing. Is that normal behavior of ipmi
# /usr/local/sbin/ipmi-sel
ipmi-sel: unable to get SEL record

From bmc-info, I have

Device ID:         20
Device Revision:   0
Firmware Revision: 14.64
                   [Device Available (normal operation)]
IPMI Version:      2.0
Additional Device Support:
                   [Sensor Device]
                   [SDR Repository Device]
                   [SEL Device]
                   [FRU Inventory Device]
                   [IPMB Event Receiver]
                   [IPMB Event Generator]
                   [Bridge]
Manufacturer ID:   878h
Product ID:        0h
Aux Firmware Revision Info: 0h
.
.... then channel info

I have less knowledge regarding h/w kinda things.

Thanks
Sharad Chandra


On Friday 12 October 2007 4:03 pm, Anand Babu Periasamy wrote:
Hmm.. it looks like your sensor data repository (SDR) itself
has only few entries. It is possible that your IPMI BMC only
supports basic sensors, or you will need a SDR firmware update.

--
Anand Babu Periasamy.

Sharad Chandra writes:
> address@hidden ~]# /usr/local/sbin/ipmi-sensors
> 22273: CPU 1 (Temperature): 0.00 C (NA/78.00): [OK]
> 22274: CPU 2 (Temperature): 0.00 C (NA/78.00): [OK]
> 22275: SYSTEM (Temperature): 0.00 C (NA/83.00): [OK]
> 22276: 3.3V (Voltage): 0.00 V (0.00/0.00): [OK]
> 22278: 5V (Voltage): 0.00 V (0.00/0.00): [OK]
> 22279: 12V (Voltage): 0.00 V (0.00/0.00): [OK]
> 22280: -12V (Voltage): 105.00 V (0.00/0.00): [OK]
> 22281: Fan1 (Fan): 11.00 RPM (0.00/NA): [OK]
> 22282: Fan2 (Fan): 83.00 RPM (0.00/NA): [OK]
> 22283: Fan3 (Fan): 0.00 RPM (0.00/NA): [OK]
> 22284: Fan4 (Fan): 26.00 RPM (0.00/NA): [OK]
> 22285: Fan5 (Fan): 26.00 RPM (0.00/NA): [OK]
> 22286: Fan6 (Fan): 0.00 RPM (0.00/NA): [OK]
> 22287: Fan7 (Fan): 0.00 RPM (0.00/NA): [OK]
> 22288: Fan8 (Fan): 0.00 RPM (0.00/NA): [OK]
> 22289: Intrusion (Platform Chassis Intrusion): [General Chassis
> Intrusion] 22290: Power Supply (Power Supply): [Power Supply Failure
> detected] address@hidden ~]#
>
>> Hi Sharad, Can you please post the full output without -g option?
>
> Sharad Chandra




reply via email to

[Prev in Thread] Current Thread [Next in Thread]