[Freeipmi-devel] Re: Fw: ipmi-sensors and ipmimonitoring mismatch

[Won De Erick]

--- On Fri, 4/3/09, Al Chu <address@hidden> wrote:
> Hey Won,
> 
> The reason for what you're seeing is described in the
> ipmimonitoring
> manpage.
> 
> ---
> Interpretation rules have not been written for all sensors
> permutations
> and types. Users may notice some sensors output in
> ipmi-sensors(8) do
> not output in ipmimonitoring. If sensor interpretation
> rules are needed,
> please contact the FreeIPMI maintainers.  
> ---
> 
> Looking at your sensors output below, there are three OEM
> sensors that I
> can't interpret b/c I don't know the interpretation rules
> for them.  The
> Power Unit Device Install and Fan transition
> interpretations were
> recently added in 0.7.3.  So if you update to atleast
> 0.7.3, those
> readings should show up in ipmimonitoring.
> 
> As for why Temperature Sensors aren't showing up, this
> corner case for
> HP machines also appears to have been fixed in 0.7..3.

Thank you for the tip. I installed the latest, 0.7.6, instead. 

hpdl380-fbsd71r# ipmi-sensors
1: UID Light (OEM Reserved): [OEM State = 0000h]
2: Int. Health LED (OEM Reserved): [OEM State = 0000h]
3: Ext. Health LED (OEM Reserved): [OEM State = 0000h]
4: Power Supply 1 (Power Supply): [Presence detected]
5: Power Supply 2 (Power Supply): [NA]
6: Power Supplies (Power Supply): [Non-redundant:Sufficient Resources from 
Redun                      dant]
8: VRM 1 (Power Unit): [Device Inserted/Device Present]
9: VRM 2 (Power Unit): [Device Inserted/Device Present]
10: Fan 1 (Fan): [transition to Running]
11: Fan 2 (Fan): [transition to Running]
12: Fan 3 (Fan): [transition to Running]
13: Fan 4 (Fan): [transition to Running]
14: Fan 5 (Fan): [transition to Running]
15: Fan 6 (Fan): [transition to Running]
16: Fans (Fan): [Fully Redundant]
18: Temp 1 (Temperature): 35.00 C (NA/70.00): [OK]
19: Temp 2 (Temperature): 17.00 C (NA/39.00): [OK]
20: Temp 3 (Temperature): 30.00 C (NA/127.00): [OK]
21: Temp 4 (Temperature): 30.00 C (NA/127.00): [OK]
22: Temp 5 (Temperature): 46.00 C (NA/77.00): [OK]
23: Temp 6 (Temperature): 30.00 C (NA/127.00): [OK]
24: Temp 7 (Temperature): 30.00 C (NA/127.00): [OK]
25: Power Meter (Current): [Device Enabled]


hpdl380-fbsd71r# ipmimonitoring
Record_ID | Sensor Name | Sensor Group | Monitoring Status| Sensor Units | 
Sensor Reading
4 | Power Supply 1 | Power Supply | Nominal | N/A | 'Presence detected'
6 | Power Supplies | Power Supply | Critical | N/A | 'Non-redundant:Sufficient 
Resources from Redu    ndant'
8 | VRM 1 | Power Unit | Nominal | N/A | 'Device Inserted/Device Present'
9 | VRM 2 | Power Unit | Nominal | N/A | 'Device Inserted/Device Present'
10 | Fan 1 | Fan | Nominal | N/A | 'transition to Running'
11 | Fan 2 | Fan | Nominal | N/A | 'transition to Running'
12 | Fan 3 | Fan | Nominal | N/A | 'transition to Running'
13 | Fan 4 | Fan | Nominal | N/A | 'transition to Running'
14 | Fan 5 | Fan | Nominal | N/A | 'transition to Running'
15 | Fan 6 | Fan | Nominal | N/A | 'transition to Running'
16 | Fans | Fan | Nominal | N/A | 'Fully Redundant'
18 | Temp 1 | Temperature | Nominal | C | 35.000000
19 | Temp 2 | Temperature | Nominal | C | 17.000000
20 | Temp 3 | Temperature | Nominal | C | 30.000000
21 | Temp 4 | Temperature | Nominal | C | 30.000000
22 | Temp 5 | Temperature | Nominal | C | 46.000000
23 | Temp 6 | Temperature | Nominal | C | 30.000000
24 | Temp 7 | Temperature | Nominal | C | 30.000000
hpdl380-fbsd71r#

One thing left is how i can into the SEL. I tried this with other tools. None 
of them gave an output. :(

The box is IPMI v2.0-compliant. I can see a lot of logs using iLO.

Thanks,

Won