[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Freeipmi-devel] Can't read CPU OEM Sensor Supermicro X8SIL-F
|
From: |
Albert Chu |
|
Subject: |
Re: [Freeipmi-devel] Can't read CPU OEM Sensor Supermicro X8SIL-F |
|
Date: |
Mon, 11 Jul 2011 14:06:27 -0700 |
Hi David,
I have a beta here, can you please LMK if it works for you.
http://download.gluster.com/pub/freeipmi/qa-release/freeipmi-1.0.6.beta0.tar.gz
Thanks,
Al
On Mon, 2011-07-11 at 10:59 -0700, Al Chu wrote:
> Hi David,
>
> It seems to be like all the other Supermicro CPU OEM sensors, so I can
> just add the interpretation support in for you. I'll get a beta tar.gz
> to you to try.
>
> BTW,
>
> > 1143 | PS Status | Power Supply | N/A | N/A | N/A
> | 'Presence detected' 'Unrecognized Event = 0100h' 'Unrecognized Event =
> 0200h' 'Unrecognized Event = 0400h' 'Unrecognized Event = 0800h'
> 'Unrecognized Event = 1000h' 'Unrecognized Event = 2000h' 'Unrecognized
> Event = 4000h'
>
> You can cleanup this messy output w/ the --ignore-unrecognized-events option.
>
> (I reported this issue to Supermicro awhile back).
>
> Al
>
> On Mon, 2011-07-11 at 01:45 -0700, vitamin.b wrote:
> > Hello,
> >
> > i need some help on reading the cpu sensor from this hardware:
> > Mainboard: Supermicro X8SIL-F Rev. 1.02
> > CPU: Intel Xeon L3406
> >
> >
> > uname -a
> > bmc-info
> > ipmi-sensors -V
> > ipmi-sensors --flush-cache
> > ipmi-sensors --interpret-oem-data --output-sensor-state
> > ipmi-sensors --interpret-oem-data --output-sensor-state
> > --ignore-not-available-sensors
> > ipmi-sensors --interpret-oem-data --output-sensor-state -v --record-ids=71
> >
> >
> > $ uname -a
> > Linux vidar 2.6.38-bpo.2-amd64 #1 SMP Mon Jun 6 15:24:02 UTC 2011 x86_64
> > GNU/Linux
> >
> >
> > $ bmc-info
> > Device ID : 32
> > Device Revision : 1
> > Device SDRs : unsupported
> > Firmware Revision : 2.50
> > Device Available : yes (normal operation)
> > IPMI Version : 2.0
> > Sensor Device : supported
> > SDR Repository Device : supported
> > SEL Device : supported
> > FRU Inventory Device : supported
> > IPMB Event Receiver : supported
> > IPMB Event Generator : supported
> > Bridge : unsupported
> > Chassis Device : supported
> > Manufacturer ID : Super Micro Computer Inc. (47488)
> > Product ID : 1541
> >
> > GUID : 00000000-0000-0000-0000-000000000000
> >
> > Channel Information
> >
> > Channel Number : 0
> > Medium Type : IPMB (I2C)
> > Protocol Type : IPMB-1.0
> > Active Session Count : 0
> > Session Support : session-less
> > Vendor ID : Intelligent Platform Management Interface forum
> > (7154)
> >
> > Channel Number : 1
> > Medium Type : 802.3 LAN
> > Protocol Type : IPMB-1.0
> > Active Session Count : 0
> > Session Support : multi-session
> > Vendor ID : Intelligent Platform Management Interface forum
> > (7154)
> >
> > Channel Number : 3
> > Medium Type : Asynch. Serial/Modem (RS-232)
> > Protocol Type : IPMB-1.0
> > Active Session Count : 0
> > Session Support : single-session
> > Vendor ID : Intelligent Platform Management Interface forum
> > (7154)
> >
> > Channel Number : 5
> > Medium Type : IPMB (I2C)
> > Protocol Type : IPMB-1.0
> > Active Session Count : 0
> > Session Support : session-less
> > Vendor ID : Intelligent Platform Management Interface forum
> > (7154)
> >
> >
> > $ ipmi-sensors -V
> > ipmi-sensors - 1.0.5
> > Copyright (C) 2003-2010 FreeIPMI Core Team
> > This program is free software; you may redistribute it under the terms of
> > the GNU General Public License. This program has absolutely no warranty.
> >
> >
> > $ ipmi-sensors --flush-cache
> > Flushing cache: /root/.freeipmi/sdr-cache/sdr-cache-vidar.localhost
> >
> >
> > $ ipmi-sensors --interpret-oem-data --output-sensor-state
> > Caching SDR repository information:
> > /root/.freeipmi/sdr-cache/sdr-cache-vidar.localhost
> > Caching SDR record 25 of 25 (current record ID 1612)
> > ID | Name | Type | State | Reading | Units |
> > Event
> > 4 | System Temp | Temperature | Nominal | 55.00 | C |
> > 'OK'
> > 71 | CPU Temp | OEM Reserved | N/A | N/A | N/A |
> > 'OEM Event = 0000h'
> > 138 | FAN 1 | Fan | Nominal | 1325.00 | RPM |
> > 'OK'
> > 205 | FAN 2 | Fan | N/A | N/A | RPM |
> > N/A
> > 272 | FAN 3 | Fan | Nominal | 1140.00 | RPM |
> > 'OK'
> > 339 | FAN 4 | Fan | Nominal | 1140.00 | RPM |
> > 'OK'
> > 406 | FAN 5 | Fan | Nominal | 1325.00 | RPM |
> > 'OK'
> > 473 | CPU Vcore | Voltage | Nominal | 0.90 | V |
> > 'OK'
> > 540 | +3.3VCC | Voltage | Nominal | 3.26 | V |
> > 'OK'
> > 607 | +12 V | Voltage | Nominal | 12.14 | V |
> > 'OK'
> > 674 | CPU DIMM | Voltage | Nominal | 1.52 | V |
> > 'OK'
> > 741 | +5 V | Voltage | Nominal | 5.09 | V |
> > 'OK'
> > 808 | -12 V | Voltage | Nominal | -12.48 | V |
> > 'OK'
> > 875 | VBAT | Voltage | Nominal | 3.14 | V |
> > 'OK'
> > 942 | +3.3VSB | Voltage | Nominal | 3.25 | V |
> > 'OK'
> > 1009 | AVCC | Voltage | Nominal | 3.26 | V |
> > 'OK'
> > 1076 | Chassis Intru | Physical Security | Nominal | N/A | N/A |
> > 'OK'
> > 1143 | PS Status | Power Supply | N/A | N/A | N/A |
> > 'Presence detected' 'Unrecognized Event = 0100h' 'Unrecognized Event =
> > 0200h' 'Unrecognized Event = 0400h' 'Unrecognized Event = 0800h'
> > 'Unrecognized Event = 1000h' 'Unrecognized Event = 2000h' 'Unrecognized
> > Event = 4000h'
> >
> >
> > $ ipmi-sensors --interpret-oem-data --output-sensor-state
> > --ignore-not-available-sensors
> > ID | Name | Type | State | Reading | Units |
> > Event
> > 4 | System Temp | Temperature | Nominal | 55.00 | C |
> > 'OK'
> > 71 | CPU Temp | OEM Reserved | N/A | N/A | N/A |
> > 'OEM Event = 0000h'
> > 138 | FAN 1 | Fan | Nominal | 1325.00 | RPM |
> > 'OK'
> > 272 | FAN 3 | Fan | Nominal | 1140.00 | RPM |
> > 'OK'
> > 339 | FAN 4 | Fan | Nominal | 1140.00 | RPM |
> > 'OK'
> > 406 | FAN 5 | Fan | Nominal | 1510.00 | RPM |
> > 'OK'
> > 473 | CPU Vcore | Voltage | Nominal | 0.90 | V |
> > 'OK'
> > 540 | +3.3VCC | Voltage | Nominal | 3.26 | V |
> > 'OK'
> > 607 | +12 V | Voltage | Nominal | 12.14 | V |
> > 'OK'
> > 674 | CPU DIMM | Voltage | Nominal | 1.53 | V |
> > 'OK'
> > 741 | +5 V | Voltage | Nominal | 5.09 | V |
> > 'OK'
> > 808 | -12 V | Voltage | Nominal | -12.48 | V |
> > 'OK'
> > 875 | VBAT | Voltage | Nominal | 3.14 | V |
> > 'OK'
> > 942 | +3.3VSB | Voltage | Nominal | 3.25 | V |
> > 'OK'
> > 1009 | AVCC | Voltage | Nominal | 3.26 | V |
> > 'OK'
> > 1076 | Chassis Intru | Physical Security | Nominal | N/A | N/A |
> > 'OK'
> > 1143 | PS Status | Power Supply | N/A | N/A | N/A |
> > 'Presence detected' 'Unrecognized Event = 0100h' 'Unrecognized Event =
> > 0200h' 'Unrecognized Event = 0400h' 'Unrecognized Event = 0800h'
> > 'Unrecognized Event = 1000h' 'Unrecognized Event = 2000h' 'Unrecognized
> > Event = 4000h'
> >
> >
> > $ ipmi-sensors --interpret-oem-data --output-sensor-state -v --record-ids=71
> > Record ID: 71
> > ID String: CPU Temp
> > Sensor Type: OEM Reserved (C0h)
> > Sensor Number: 18
> > IPMB Slave Address: 10h
> > Sensor Owner ID: 20h
> > Sensor Owner LUN: 0h
> > Channel Number: 0h
> > Entity ID: processor (3)
> > Entity Instance: 1
> > Entity Instance Type: Physical Entity
> > Event/Reading Type Code: 70h
> > Sensor State: N/A
> > Sensor Event: 'OEM Event = 0000h'
> >
> >
> > best regards
> > David
> >
> >
> > _______________________________________________
> > Freeipmi-devel mailing list
> > address@hidden
> > https://lists.gnu.org/mailman/listinfo/freeipmi-devel
--
Albert Chu
address@hidden
Computer Scientist
High Performance Systems Division
Lawrence Livermore National Laboratory