Re: [Freeipmi-devel] Can't read CPU OEM Sensor Supermicro X8SIL-F

[Albert Chu]

Hi David,

Remember to use --interpret-oem-data.

Al

On Mon, 2011-07-11 at 14:30 -0700, David Ulbricht wrote:
> Hello Al,
> 
> thank you for your fast response but unfortunately this beta shows the same 
> message like version 1.0.5. Do I have to configure something special after 
> compiling?
> 
> $ ipmi-sensors -V
> ipmi-sensors - 1.0.6.beta0
> Copyright (C) 2003-2010 FreeIPMI Core Team
> This program is free software; you may redistribute it under the terms of
> the GNU General Public License.  This program has absolutely no warranty.
> 
> 
> $ ipmi-sensors --ignore-unrecognized-events
> ID   | Name          | Type              | Reading    | Units | Event
> 4    | System Temp   | Temperature       | 58.00      | C     | 'OK'
> 71   | CPU Temp      | OEM Reserved      | N/A        | N/A   | 'OEM Event = 
> 0000h'
> 138  | FAN 1         | Fan               | 1325.00    | RPM   | 'OK'
> 205  | FAN 2         | Fan               | N/A        | RPM   | N/A
> 272  | FAN 3         | Fan               | 1140.00    | RPM   | 'OK'
> 339  | FAN 4         | Fan               | 1140.00    | RPM   | 'OK'
> 406  | FAN 5         | Fan               | 1510.00    | RPM   | 'OK'
> 473  | CPU Vcore     | Voltage           | 0.90       | V     | 'OK'
> 540  | +3.3VCC       | Voltage           | 3.26       | V     | 'OK'
> 607  | +12 V         | Voltage           | 12.14      | V     | 'OK'
> 674  | CPU DIMM      | Voltage           | 1.53       | V     | 'OK'
> 741  | +5 V          | Voltage           | 5.09       | V     | 'OK'
> 808  | -12 V         | Voltage           | -12.48     | V     | 'OK'
> 875  | VBAT          | Voltage           | 3.14       | V     | 'OK'
> 942  | +3.3VSB       | Voltage           | 3.25       | V     | 'OK'
> 1009 | AVCC          | Voltage           | 3.26       | V     | 'OK'
> 1076 | Chassis Intru | Physical Security | N/A        | N/A   | 'OK'
> 1143 | PS Status     | Power Supply      | N/A        | N/A   | 'Presence 
> detected'
> 
> David
> 
> 
> Am 11.07.2011 um 23:06 schrieb Albert Chu:
> 
> > Hi David,
> > 
> > I have a beta here, can you please LMK if it works for you.
> > 
> > http://download.gluster.com/pub/freeipmi/qa-release/freeipmi-1.0.6.beta0.tar.gz
> > 
> > Thanks,
> > 
> > Al
> > 
> > On Mon, 2011-07-11 at 10:59 -0700, Al Chu wrote:
> >> Hi David,
> >> 
> >> It seems to be like all the other Supermicro CPU OEM sensors, so I can
> >> just add the interpretation support in for you.  I'll get a beta tar.gz
> >> to you to try.
> >> 
> >> BTW,
> >> 
> >>> 1143 | PS Status     | Power Supply      | N/A      | N/A        | N/A
> >> | 'Presence detected' 'Unrecognized Event = 0100h' 'Unrecognized Event =
> >> 0200h' 'Unrecognized Event = 0400h' 'Unrecognized Event = 0800h'
> >> 'Unrecognized Event = 1000h' 'Unrecognized Event = 2000h' 'Unrecognized
> >> Event = 4000h'
> >> 
> >> You can cleanup this messy output w/ the --ignore-unrecognized-events 
> >> option.
> >> 
> >> (I reported this issue to Supermicro awhile back).
> >> 
> >> Al 
> >> 
> >> On Mon, 2011-07-11 at 01:45 -0700, vitamin.b wrote:
> >>> Hello,
> >>> 
> >>> i need some help on reading the cpu sensor from this hardware:
> >>> Mainboard: Supermicro X8SIL-F Rev. 1.02
> >>> CPU: Intel Xeon L3406 
> >>> 
> >>> 
> >>> uname -a
> >>> bmc-info
> >>> ipmi-sensors -V
> >>> ipmi-sensors --flush-cache
> >>> ipmi-sensors --interpret-oem-data --output-sensor-state
> >>> ipmi-sensors --interpret-oem-data --output-sensor-state 
> >>> --ignore-not-available-sensors
> >>> ipmi-sensors --interpret-oem-data --output-sensor-state -v --record-ids=71
> >>> 
> >>> 
> >>> $ uname -a
> >>> Linux vidar 2.6.38-bpo.2-amd64 #1 SMP Mon Jun 6 15:24:02 UTC 2011 x86_64 
> >>> GNU/Linux
> >>> 
> >>> 
> >>> $ bmc-info
> >>> Device ID             : 32
> >>> Device Revision       : 1
> >>> Device SDRs           : unsupported
> >>> Firmware Revision     : 2.50
> >>> Device Available      : yes (normal operation)
> >>> IPMI Version          : 2.0
> >>> Sensor Device         : supported
> >>> SDR Repository Device : supported
> >>> SEL Device            : supported
> >>> FRU Inventory Device  : supported
> >>> IPMB Event Receiver   : supported
> >>> IPMB Event Generator  : supported
> >>> Bridge                : unsupported
> >>> Chassis Device        : supported
> >>> Manufacturer ID       : Super Micro Computer Inc. (47488)
> >>> Product ID            : 1541
> >>> 
> >>> GUID : 00000000-0000-0000-0000-000000000000
> >>> 
> >>> Channel Information
> >>> 
> >>> Channel Number       : 0
> >>> Medium Type          : IPMB (I2C)
> >>> Protocol Type        : IPMB-1.0
> >>> Active Session Count : 0
> >>> Session Support      : session-less
> >>> Vendor ID            : Intelligent Platform Management Interface forum 
> >>> (7154)
> >>> 
> >>> Channel Number       : 1
> >>> Medium Type          : 802.3 LAN
> >>> Protocol Type        : IPMB-1.0
> >>> Active Session Count : 0
> >>> Session Support      : multi-session
> >>> Vendor ID            : Intelligent Platform Management Interface forum 
> >>> (7154)
> >>> 
> >>> Channel Number       : 3
> >>> Medium Type          : Asynch. Serial/Modem (RS-232)
> >>> Protocol Type        : IPMB-1.0
> >>> Active Session Count : 0
> >>> Session Support      : single-session
> >>> Vendor ID            : Intelligent Platform Management Interface forum 
> >>> (7154)
> >>> 
> >>> Channel Number       : 5
> >>> Medium Type          : IPMB (I2C)
> >>> Protocol Type        : IPMB-1.0
> >>> Active Session Count : 0
> >>> Session Support      : session-less
> >>> Vendor ID            : Intelligent Platform Management Interface forum 
> >>> (7154)
> >>> 
> >>>   
> >>> $ ipmi-sensors -V
> >>> ipmi-sensors - 1.0.5
> >>> Copyright (C) 2003-2010 FreeIPMI Core Team
> >>> This program is free software; you may redistribute it under the terms of
> >>> the GNU General Public License.  This program has absolutely no warranty.
> >>> 
> >>> 
> >>> $ ipmi-sensors --flush-cache
> >>> Flushing cache: /root/.freeipmi/sdr-cache/sdr-cache-vidar.localhost
> >>> 
> >>> 
> >>> $ ipmi-sensors --interpret-oem-data --output-sensor-state 
> >>> Caching SDR repository information: 
> >>> /root/.freeipmi/sdr-cache/sdr-cache-vidar.localhost
> >>> Caching SDR record 25 of 25 (current record ID 1612)
> >>> ID   | Name          | Type              | State    | Reading    | Units 
> >>> | Event
> >>> 4    | System Temp   | Temperature       | Nominal  | 55.00      | C     
> >>> | 'OK'
> >>> 71   | CPU Temp      | OEM Reserved      | N/A      | N/A        | N/A   
> >>> | 'OEM Event = 0000h'
> >>> 138  | FAN 1         | Fan               | Nominal  | 1325.00    | RPM   
> >>> | 'OK'
> >>> 205  | FAN 2         | Fan               | N/A      | N/A        | RPM   
> >>> | N/A
> >>> 272  | FAN 3         | Fan               | Nominal  | 1140.00    | RPM   
> >>> | 'OK'
> >>> 339  | FAN 4         | Fan               | Nominal  | 1140.00    | RPM   
> >>> | 'OK'
> >>> 406  | FAN 5         | Fan               | Nominal  | 1325.00    | RPM   
> >>> | 'OK'
> >>> 473  | CPU Vcore     | Voltage           | Nominal  | 0.90       | V     
> >>> | 'OK'
> >>> 540  | +3.3VCC       | Voltage           | Nominal  | 3.26       | V     
> >>> | 'OK'
> >>> 607  | +12 V         | Voltage           | Nominal  | 12.14      | V     
> >>> | 'OK'
> >>> 674  | CPU DIMM      | Voltage           | Nominal  | 1.52       | V     
> >>> | 'OK'
> >>> 741  | +5 V          | Voltage           | Nominal  | 5.09       | V     
> >>> | 'OK'
> >>> 808  | -12 V         | Voltage           | Nominal  | -12.48     | V     
> >>> | 'OK'
> >>> 875  | VBAT          | Voltage           | Nominal  | 3.14       | V     
> >>> | 'OK'
> >>> 942  | +3.3VSB       | Voltage           | Nominal  | 3.25       | V     
> >>> | 'OK'
> >>> 1009 | AVCC          | Voltage           | Nominal  | 3.26       | V     
> >>> | 'OK'
> >>> 1076 | Chassis Intru | Physical Security | Nominal  | N/A        | N/A   
> >>> | 'OK'
> >>> 1143 | PS Status     | Power Supply      | N/A      | N/A        | N/A   
> >>> | 'Presence detected' 'Unrecognized Event = 0100h' 'Unrecognized Event = 
> >>> 0200h' 'Unrecognized Event = 0400h' 'Unrecognized Event = 0800h' 
> >>> 'Unrecognized Event = 1000h' 'Unrecognized Event = 2000h' 'Unrecognized 
> >>> Event = 4000h'
> >>> 
> >>> 
> >>> $ ipmi-sensors --interpret-oem-data --output-sensor-state 
> >>> --ignore-not-available-sensors
> >>> ID   | Name          | Type              | State    | Reading    | Units 
> >>> | Event
> >>> 4    | System Temp   | Temperature       | Nominal  | 55.00      | C     
> >>> | 'OK'
> >>> 71   | CPU Temp      | OEM Reserved      | N/A      | N/A        | N/A   
> >>> | 'OEM Event = 0000h'
> >>> 138  | FAN 1         | Fan               | Nominal  | 1325.00    | RPM   
> >>> | 'OK'
> >>> 272  | FAN 3         | Fan               | Nominal  | 1140.00    | RPM   
> >>> | 'OK'
> >>> 339  | FAN 4         | Fan               | Nominal  | 1140.00    | RPM   
> >>> | 'OK'
> >>> 406  | FAN 5         | Fan               | Nominal  | 1510.00    | RPM   
> >>> | 'OK'
> >>> 473  | CPU Vcore     | Voltage           | Nominal  | 0.90       | V     
> >>> | 'OK'
> >>> 540  | +3.3VCC       | Voltage           | Nominal  | 3.26       | V     
> >>> | 'OK'
> >>> 607  | +12 V         | Voltage           | Nominal  | 12.14      | V     
> >>> | 'OK'
> >>> 674  | CPU DIMM      | Voltage           | Nominal  | 1.53       | V     
> >>> | 'OK'
> >>> 741  | +5 V          | Voltage           | Nominal  | 5.09       | V     
> >>> | 'OK'
> >>> 808  | -12 V         | Voltage           | Nominal  | -12.48     | V     
> >>> | 'OK'
> >>> 875  | VBAT          | Voltage           | Nominal  | 3.14       | V     
> >>> | 'OK'
> >>> 942  | +3.3VSB       | Voltage           | Nominal  | 3.25       | V     
> >>> | 'OK'
> >>> 1009 | AVCC          | Voltage           | Nominal  | 3.26       | V     
> >>> | 'OK'
> >>> 1076 | Chassis Intru | Physical Security | Nominal  | N/A        | N/A   
> >>> | 'OK'
> >>> 1143 | PS Status     | Power Supply      | N/A      | N/A        | N/A   
> >>> | 'Presence detected' 'Unrecognized Event = 0100h' 'Unrecognized Event = 
> >>> 0200h' 'Unrecognized Event = 0400h' 'Unrecognized Event = 0800h' 
> >>> 'Unrecognized Event = 1000h' 'Unrecognized Event = 2000h' 'Unrecognized 
> >>> Event = 4000h'
> >>> 
> >>> 
> >>> $ ipmi-sensors --interpret-oem-data --output-sensor-state -v 
> >>> --record-ids=71
> >>> Record ID: 71
> >>> ID String: CPU Temp
> >>> Sensor Type: OEM Reserved (C0h)
> >>> Sensor Number: 18
> >>> IPMB Slave Address: 10h
> >>> Sensor Owner ID: 20h
> >>> Sensor Owner LUN: 0h
> >>> Channel Number: 0h
> >>> Entity ID: processor (3)
> >>> Entity Instance: 1
> >>> Entity Instance Type: Physical Entity
> >>> Event/Reading Type Code: 70h
> >>> Sensor State: N/A
> >>> Sensor Event: 'OEM Event = 0000h'
> >>> 
> >>> 
> >>> best regards
> >>> David
> >>> 
> >>> 
> >>> _______________________________________________
> >>> Freeipmi-devel mailing list
> >>> address@hidden
> >>> https://lists.gnu.org/mailman/listinfo/freeipmi-devel
> > -- 
> > Albert Chu
> > address@hidden
> > Computer Scientist
> > High Performance Systems Division
> > Lawrence Livermore National Laboratory
> > 
> > 
> 
-- 
Albert Chu
address@hidden
Computer Scientist
High Performance Systems Division
Lawrence Livermore National Laboratory