[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Freeipmi-devel] Can't read CPU OEM Sensor Supermicro X8SIL-F
|
From: |
David Ulbricht |
|
Subject: |
Re: [Freeipmi-devel] Can't read CPU OEM Sensor Supermicro X8SIL-F |
|
Date: |
Mon, 11 Jul 2011 23:45:52 +0200 |
Hi Al,
you're right - it work with this command.
$ ipmi-sensors --interpret-oem-data --record-ids=71
ID | Name | Type | Reading | Units | Event
71 | CPU Temp | OEM Reserved | N/A | N/A | 'Low'
thank you for your quick support!
David
Am 11.07.2011 um 23:36 schrieb Albert Chu:
> Hi David,
>
> Remember to use --interpret-oem-data.
>
> Al
>
> On Mon, 2011-07-11 at 14:30 -0700, David Ulbricht wrote:
>> Hello Al,
>>
>> thank you for your fast response but unfortunately this beta shows the same
>> message like version 1.0.5. Do I have to configure something special after
>> compiling?
>>
>> $ ipmi-sensors -V
>> ipmi-sensors - 1.0.6.beta0
>> Copyright (C) 2003-2010 FreeIPMI Core Team
>> This program is free software; you may redistribute it under the terms of
>> the GNU General Public License. This program has absolutely no warranty.
>>
>>
>> $ ipmi-sensors --ignore-unrecognized-events
>> ID | Name | Type | Reading | Units | Event
>> 4 | System Temp | Temperature | 58.00 | C | 'OK'
>> 71 | CPU Temp | OEM Reserved | N/A | N/A | 'OEM Event =
>> 0000h'
>> 138 | FAN 1 | Fan | 1325.00 | RPM | 'OK'
>> 205 | FAN 2 | Fan | N/A | RPM | N/A
>> 272 | FAN 3 | Fan | 1140.00 | RPM | 'OK'
>> 339 | FAN 4 | Fan | 1140.00 | RPM | 'OK'
>> 406 | FAN 5 | Fan | 1510.00 | RPM | 'OK'
>> 473 | CPU Vcore | Voltage | 0.90 | V | 'OK'
>> 540 | +3.3VCC | Voltage | 3.26 | V | 'OK'
>> 607 | +12 V | Voltage | 12.14 | V | 'OK'
>> 674 | CPU DIMM | Voltage | 1.53 | V | 'OK'
>> 741 | +5 V | Voltage | 5.09 | V | 'OK'
>> 808 | -12 V | Voltage | -12.48 | V | 'OK'
>> 875 | VBAT | Voltage | 3.14 | V | 'OK'
>> 942 | +3.3VSB | Voltage | 3.25 | V | 'OK'
>> 1009 | AVCC | Voltage | 3.26 | V | 'OK'
>> 1076 | Chassis Intru | Physical Security | N/A | N/A | 'OK'
>> 1143 | PS Status | Power Supply | N/A | N/A | 'Presence
>> detected'
>>
>> David
>>
>>
>> Am 11.07.2011 um 23:06 schrieb Albert Chu:
>>
>>> Hi David,
>>>
>>> I have a beta here, can you please LMK if it works for you.
>>>
>>> http://download.gluster.com/pub/freeipmi/qa-release/freeipmi-1.0.6.beta0.tar.gz
>>>
>>> Thanks,
>>>
>>> Al
>>>
>>> On Mon, 2011-07-11 at 10:59 -0700, Al Chu wrote:
>>>> Hi David,
>>>>
>>>> It seems to be like all the other Supermicro CPU OEM sensors, so I can
>>>> just add the interpretation support in for you. I'll get a beta tar.gz
>>>> to you to try.
>>>>
>>>> BTW,
>>>>
>>>>> 1143 | PS Status | Power Supply | N/A | N/A | N/A
>>>> | 'Presence detected' 'Unrecognized Event = 0100h' 'Unrecognized Event =
>>>> 0200h' 'Unrecognized Event = 0400h' 'Unrecognized Event = 0800h'
>>>> 'Unrecognized Event = 1000h' 'Unrecognized Event = 2000h' 'Unrecognized
>>>> Event = 4000h'
>>>>
>>>> You can cleanup this messy output w/ the --ignore-unrecognized-events
>>>> option.
>>>>
>>>> (I reported this issue to Supermicro awhile back).
>>>>
>>>> Al
>>>>
>>>> On Mon, 2011-07-11 at 01:45 -0700, vitamin.b wrote:
>>>>> Hello,
>>>>>
>>>>> i need some help on reading the cpu sensor from this hardware:
>>>>> Mainboard: Supermicro X8SIL-F Rev. 1.02
>>>>> CPU: Intel Xeon L3406
>>>>>
>>>>>
>>>>> uname -a
>>>>> bmc-info
>>>>> ipmi-sensors -V
>>>>> ipmi-sensors --flush-cache
>>>>> ipmi-sensors --interpret-oem-data --output-sensor-state
>>>>> ipmi-sensors --interpret-oem-data --output-sensor-state
>>>>> --ignore-not-available-sensors
>>>>> ipmi-sensors --interpret-oem-data --output-sensor-state -v --record-ids=71
>>>>>
>>>>>
>>>>> $ uname -a
>>>>> Linux vidar 2.6.38-bpo.2-amd64 #1 SMP Mon Jun 6 15:24:02 UTC 2011 x86_64
>>>>> GNU/Linux
>>>>>
>>>>>
>>>>> $ bmc-info
>>>>> Device ID : 32
>>>>> Device Revision : 1
>>>>> Device SDRs : unsupported
>>>>> Firmware Revision : 2.50
>>>>> Device Available : yes (normal operation)
>>>>> IPMI Version : 2.0
>>>>> Sensor Device : supported
>>>>> SDR Repository Device : supported
>>>>> SEL Device : supported
>>>>> FRU Inventory Device : supported
>>>>> IPMB Event Receiver : supported
>>>>> IPMB Event Generator : supported
>>>>> Bridge : unsupported
>>>>> Chassis Device : supported
>>>>> Manufacturer ID : Super Micro Computer Inc. (47488)
>>>>> Product ID : 1541
>>>>>
>>>>> GUID : 00000000-0000-0000-0000-000000000000
>>>>>
>>>>> Channel Information
>>>>>
>>>>> Channel Number : 0
>>>>> Medium Type : IPMB (I2C)
>>>>> Protocol Type : IPMB-1.0
>>>>> Active Session Count : 0
>>>>> Session Support : session-less
>>>>> Vendor ID : Intelligent Platform Management Interface forum
>>>>> (7154)
>>>>>
>>>>> Channel Number : 1
>>>>> Medium Type : 802.3 LAN
>>>>> Protocol Type : IPMB-1.0
>>>>> Active Session Count : 0
>>>>> Session Support : multi-session
>>>>> Vendor ID : Intelligent Platform Management Interface forum
>>>>> (7154)
>>>>>
>>>>> Channel Number : 3
>>>>> Medium Type : Asynch. Serial/Modem (RS-232)
>>>>> Protocol Type : IPMB-1.0
>>>>> Active Session Count : 0
>>>>> Session Support : single-session
>>>>> Vendor ID : Intelligent Platform Management Interface forum
>>>>> (7154)
>>>>>
>>>>> Channel Number : 5
>>>>> Medium Type : IPMB (I2C)
>>>>> Protocol Type : IPMB-1.0
>>>>> Active Session Count : 0
>>>>> Session Support : session-less
>>>>> Vendor ID : Intelligent Platform Management Interface forum
>>>>> (7154)
>>>>>
>>>>>
>>>>> $ ipmi-sensors -V
>>>>> ipmi-sensors - 1.0.5
>>>>> Copyright (C) 2003-2010 FreeIPMI Core Team
>>>>> This program is free software; you may redistribute it under the terms of
>>>>> the GNU General Public License. This program has absolutely no warranty.
>>>>>
>>>>>
>>>>> $ ipmi-sensors --flush-cache
>>>>> Flushing cache: /root/.freeipmi/sdr-cache/sdr-cache-vidar.localhost
>>>>>
>>>>>
>>>>> $ ipmi-sensors --interpret-oem-data --output-sensor-state
>>>>> Caching SDR repository information:
>>>>> /root/.freeipmi/sdr-cache/sdr-cache-vidar.localhost
>>>>> Caching SDR record 25 of 25 (current record ID 1612)
>>>>> ID | Name | Type | State | Reading | Units
>>>>> | Event
>>>>> 4 | System Temp | Temperature | Nominal | 55.00 | C
>>>>> | 'OK'
>>>>> 71 | CPU Temp | OEM Reserved | N/A | N/A | N/A
>>>>> | 'OEM Event = 0000h'
>>>>> 138 | FAN 1 | Fan | Nominal | 1325.00 | RPM
>>>>> | 'OK'
>>>>> 205 | FAN 2 | Fan | N/A | N/A | RPM
>>>>> | N/A
>>>>> 272 | FAN 3 | Fan | Nominal | 1140.00 | RPM
>>>>> | 'OK'
>>>>> 339 | FAN 4 | Fan | Nominal | 1140.00 | RPM
>>>>> | 'OK'
>>>>> 406 | FAN 5 | Fan | Nominal | 1325.00 | RPM
>>>>> | 'OK'
>>>>> 473 | CPU Vcore | Voltage | Nominal | 0.90 | V
>>>>> | 'OK'
>>>>> 540 | +3.3VCC | Voltage | Nominal | 3.26 | V
>>>>> | 'OK'
>>>>> 607 | +12 V | Voltage | Nominal | 12.14 | V
>>>>> | 'OK'
>>>>> 674 | CPU DIMM | Voltage | Nominal | 1.52 | V
>>>>> | 'OK'
>>>>> 741 | +5 V | Voltage | Nominal | 5.09 | V
>>>>> | 'OK'
>>>>> 808 | -12 V | Voltage | Nominal | -12.48 | V
>>>>> | 'OK'
>>>>> 875 | VBAT | Voltage | Nominal | 3.14 | V
>>>>> | 'OK'
>>>>> 942 | +3.3VSB | Voltage | Nominal | 3.25 | V
>>>>> | 'OK'
>>>>> 1009 | AVCC | Voltage | Nominal | 3.26 | V
>>>>> | 'OK'
>>>>> 1076 | Chassis Intru | Physical Security | Nominal | N/A | N/A
>>>>> | 'OK'
>>>>> 1143 | PS Status | Power Supply | N/A | N/A | N/A
>>>>> | 'Presence detected' 'Unrecognized Event = 0100h' 'Unrecognized Event =
>>>>> 0200h' 'Unrecognized Event = 0400h' 'Unrecognized Event = 0800h'
>>>>> 'Unrecognized Event = 1000h' 'Unrecognized Event = 2000h' 'Unrecognized
>>>>> Event = 4000h'
>>>>>
>>>>>
>>>>> $ ipmi-sensors --interpret-oem-data --output-sensor-state
>>>>> --ignore-not-available-sensors
>>>>> ID | Name | Type | State | Reading | Units
>>>>> | Event
>>>>> 4 | System Temp | Temperature | Nominal | 55.00 | C
>>>>> | 'OK'
>>>>> 71 | CPU Temp | OEM Reserved | N/A | N/A | N/A
>>>>> | 'OEM Event = 0000h'
>>>>> 138 | FAN 1 | Fan | Nominal | 1325.00 | RPM
>>>>> | 'OK'
>>>>> 272 | FAN 3 | Fan | Nominal | 1140.00 | RPM
>>>>> | 'OK'
>>>>> 339 | FAN 4 | Fan | Nominal | 1140.00 | RPM
>>>>> | 'OK'
>>>>> 406 | FAN 5 | Fan | Nominal | 1510.00 | RPM
>>>>> | 'OK'
>>>>> 473 | CPU Vcore | Voltage | Nominal | 0.90 | V
>>>>> | 'OK'
>>>>> 540 | +3.3VCC | Voltage | Nominal | 3.26 | V
>>>>> | 'OK'
>>>>> 607 | +12 V | Voltage | Nominal | 12.14 | V
>>>>> | 'OK'
>>>>> 674 | CPU DIMM | Voltage | Nominal | 1.53 | V
>>>>> | 'OK'
>>>>> 741 | +5 V | Voltage | Nominal | 5.09 | V
>>>>> | 'OK'
>>>>> 808 | -12 V | Voltage | Nominal | -12.48 | V
>>>>> | 'OK'
>>>>> 875 | VBAT | Voltage | Nominal | 3.14 | V
>>>>> | 'OK'
>>>>> 942 | +3.3VSB | Voltage | Nominal | 3.25 | V
>>>>> | 'OK'
>>>>> 1009 | AVCC | Voltage | Nominal | 3.26 | V
>>>>> | 'OK'
>>>>> 1076 | Chassis Intru | Physical Security | Nominal | N/A | N/A
>>>>> | 'OK'
>>>>> 1143 | PS Status | Power Supply | N/A | N/A | N/A
>>>>> | 'Presence detected' 'Unrecognized Event = 0100h' 'Unrecognized Event =
>>>>> 0200h' 'Unrecognized Event = 0400h' 'Unrecognized Event = 0800h'
>>>>> 'Unrecognized Event = 1000h' 'Unrecognized Event = 2000h' 'Unrecognized
>>>>> Event = 4000h'
>>>>>
>>>>>
>>>>> $ ipmi-sensors --interpret-oem-data --output-sensor-state -v
>>>>> --record-ids=71
>>>>> Record ID: 71
>>>>> ID String: CPU Temp
>>>>> Sensor Type: OEM Reserved (C0h)
>>>>> Sensor Number: 18
>>>>> IPMB Slave Address: 10h
>>>>> Sensor Owner ID: 20h
>>>>> Sensor Owner LUN: 0h
>>>>> Channel Number: 0h
>>>>> Entity ID: processor (3)
>>>>> Entity Instance: 1
>>>>> Entity Instance Type: Physical Entity
>>>>> Event/Reading Type Code: 70h
>>>>> Sensor State: N/A
>>>>> Sensor Event: 'OEM Event = 0000h'
>>>>>
>>>>>
>>>>> best regards
>>>>> David
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Freeipmi-devel mailing list
>>>>> address@hidden
>>>>> https://lists.gnu.org/mailman/listinfo/freeipmi-devel
>>> --
>>> Albert Chu
>>> address@hidden
>>> Computer Scientist
>>> High Performance Systems Division
>>> Lawrence Livermore National Laboratory
>>>
>>>
>>
> --
> Albert Chu
> address@hidden
> Computer Scientist
> High Performance Systems Division
> Lawrence Livermore National Laboratory
>
>