freeipmi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Freeipmi-devel] FreeIPMI 1.4.8 gets no response back from a host based


From: Reinhard Trebbow
Subject: [Freeipmi-devel] FreeIPMI 1.4.8 gets no response back from a host based on Supermicro
Date: Fri, 27 Feb 2015 12:00:54 +0000

Hello,

 

I am not sure whether this ist he right email address to report my case, otherwise correct me.

 

I have a problem with all FREEIPMI programs to get a connection to a specific host.

I have 3 Servers with the same Hardware (Supermicros) and with the same BCM-Firmware (3.36).

When I am on the servers, I can connect to the BMCs with ipmitool with no problem.

When I use for example ipmiconsole (or one of the other FREEIPMI-programs) from an remote host

I can connect to two server but not to the third one, I get “connection timeout”.

I can ping the IP-Address (the BMC-Address) for this Server and I can telnet to port 623 with no problem.

The problem is also existent when I install FREEIPMI on this System and use ipmiconsole locally.

 

The Systems are installed at a data center but the persons that are working there also have no idea what the problem

Is with this machine. They offered me to replace this systems but this means a lot of work after that to

Setup this system again from scratch.

My Idea is now that I am sending you here the description, maybe you have an idea.

I heard something about a checksum problem in earlier version and so I tried with

-W noauthcodecheck,nochecksumcheck but that doesn’t helped.

Following is the debug-output:

address@hidden ~]# ipmiconsole -h 148.251.21.252 -u monitor -p J2929dj94j9sm_4 -l user --debug

148.251.21.252: =====================================================

148.251.21.252: IPMI 1.5 Get Channel Authentication Capabilities Request

148.251.21.252: =====================================================

148.251.21.252: RMCP Header:

148.251.21.252: ------------

148.251.21.252: [               6h] = version[ 8b]

148.251.21.252: [               0h] = reserved[ 8b]

148.251.21.252: [              FFh] = sequence_number[ 8b]

148.251.21.252: [               7h] = message_class.class[ 5b]

148.251.21.252: [               0h] = message_class.reserved[ 2b]

148.251.21.252: [               0h] = message_class.ack[ 1b]

148.251.21.252: IPMI Session Header:

148.251.21.252: --------------------

148.251.21.252: [               0h] = authentication_type[ 8b]

148.251.21.252: [               0h] = session_sequence_number[32b]

148.251.21.252: [               0h] = session_id[32b]

148.251.21.252: [               9h] = ipmi_msg_len[ 8b]

148.251.21.252: IPMI Message Header:

148.251.21.252: --------------------

148.251.21.252: [              20h] = rs_addr[ 8b]

148.251.21.252: [               0h] = rs_lun[ 2b]

148.251.21.252: [               6h] = net_fn[ 6b]

148.251.21.252: [              C8h] = checksum1[ 8b]

148.251.21.252: [              81h] = rq_addr[ 8b]

148.251.21.252: [               0h] = rq_lun[ 2b]

148.251.21.252: [              16h] = rq_seq[ 6b]

148.251.21.252: IPMI Command Data:

148.251.21.252: ------------------

148.251.21.252: [              38h] = cmd[ 8b]

148.251.21.252: [               Eh] = channel_number[ 4b]

148.251.21.252: [               0h] = reserved1[ 3b]

148.251.21.252: [               1h] = get_ipmi_v2.0_extended_data[ 1b]

148.251.21.252: [               2h] = maximum_privilege_level[ 4b]

148.251.21.252: [               0h] = reserved2[ 4b]

148.251.21.252: IPMI Trailer:

148.251.21.252: --------------

148.251.21.252: [              5Fh] = checksum2[ 8b]

148.251.21.252: =====================================================

148.251.21.252: IPMI 1.5 Get Channel Authentication Capabilities Request

148.251.21.252: =====================================================

148.251.21.252: RMCP Header:

148.251.21.252: ------------

 

And it goes on until the timeout. No response data came back.

 

Thanks for reading I and your assistance.

 

 

Mit freundlichen Grüßen

 

Reinhard Trebbow

Systemadministrator IT-Infrastruktur

ANMATHO AG


Winterhuder Weg 8

22085 Hamburg

 

Telefon Zentrale:                                                           +49 (0)40 / 229 47 19-0

Telefon IT-Support:                                              +49 (0)40 / 229 47 19-30

Telefax:                                                                           +49 (0)40 / 229 47 19-19

E-Mail: address@hidden

Home: www.anmatho.de

 

Besuchen Sie uns am 11.-12. März 2015 auf der fair4business in den Holstenhallen Neumünster – Stand 162

 

Besuchen Sie uns auch auf XING, Google+ und Facebook.

 

Sitz der Gesellschaft | Legal Domicile: Hamburg

Registergericht | Registration Court: Amtsgericht Hamburg HRB 72675

Vorsitzender des Aufsichtsrates | Chairman of the Supervisory Board: Georg Berssenbrügge

Geschäftsführung | Board of Management: Andreas Kondek, Matthias Weigmann

 

 

Besuchen Sie uns am 04. Februar 2015 auf der it for business in den Lübecker media docks – Stand 16

 


reply via email to

[Prev in Thread] Current Thread [Next in Thread]