[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Freeipmi-users] Tyan Thunder S2882 with m3289 bmc module
From: |
Albert Chu |
Subject: |
Re: [Freeipmi-users] Tyan Thunder S2882 with m3289 bmc module |
Date: |
Mon, 10 Jan 2005 13:22:31 -0800 |
Hi Jan,
> This is probably off-topic, but since there is a lack of
> information on the internet I would like to try my luck here.
Nope, this is the right mailing list for this stuff :-)
> Anyway, the output of the freeipmi tools is looking good, so I could
> think(/hope) it's a bad variable.
Just skimming over it, the output looks good. Have you been able to
atleast ping the remote machine with rmcpping or ipmiping? Or is only
ipmipower that you can't get to work? I fixed a few bugs in the
username/password BMC configuration tool that could fix any
username/password errors you are getting from ipmipower.
Al
--
Albert Chu
address@hidden
Lawrence Livermore National Laboratory
----- Original Message -----
From: Jan Tiri <address@hidden>
Date: Monday, January 10, 2005 1:00 pm
Subject: [Freeipmi-users] Tyan Thunder S2882 with m3289 bmc module
> Hi guys,
>
> This is probably off-topic, but since there is a lack of
> information on
> the internet I would like to try my luck here.
>
> I have a Tyan Thunder S2882 with m3289 bmc module, which is perfectly
> recognized by the system. The server has 2 broadcom giga NICs and one
> intel pro100;
> intel eth0: 192.168.1.100 - 00:E0:81:2D:8D:F7
> broadcom eth1: none - 00:E0:81:2D:9B:36
> broadcom eth2: none - 00:E0:81:2D:9B:37
>
> Please note the internal ip address will be replaced by a
> registered one
> when put in production.
>
> >From all the (correct ?) information I collected, I configured my
> BMC with
> the same IP/MAC address as the one configured in my system (eth0)
> and I
> would assume something should listen on ports 623 and 664/udp. Well
> ...not :) I also tried the eth1 interface, same result.
>
> Anyway, the output of the freeipmi tools is looking good, so I could
> think(/hope) it's a bad variable. All by all, I want a server which
> I can
> reset from a distance when it comes unavailable for whatever reason,
> something I also could manage with the watchdog function. It would
> be nice
> if I can hook a console over IPMI (I'm using linux) but as I
> understand,this is for IPMI 2.0 (I have 1.5) and is now something
> proprierty for
> Tyan. Something possible ?
>
> Kind regards,
> Jan
>
> The output of bmc-config -o;
> Section User1
> ## Give username
> Username Anonymous
> ## Give password or leave it blank to clear password
> Password
> ## Possible values: Yes/No
> Lan_Enable_Ipmi_Msgs Yes
> ## Possible values: Yes/No
> Lan_Enable_Link_Auth Yes
> ## Possible values: Yes/No
> Lan_Enable_Restrict_To_Callback No
> ## Possible values:
> Callback/User/Operator/Administrator/OEM_Proprietary/No_Access
> Lan_Privilege_Limit User
> ## Give valid number
> Lan_Session_Limit 0
> ## Possible values: Yes/No
> Serial_Enable_Ipmi_Msgs Yes
> ## Possible values: Yes/No
> Serial_Enable_Link_Auth Yes
> ## Possible values: Yes/No
> Serial_Enable_Restrict_To_Callback No
> ## Possible values:
> Callback/User/Operator/Administrator/OEM_Proprietary/No_Access
> Serial_Privilege_Limit User
> ## Give valid number
> Serial_Session_Limit 0
> EndSection
> Section User2
> ## Give username
> Username Operator
> ## Give password or leave it blank to clear password
> Password
> ## Possible values: Yes/No
> Lan_Enable_Ipmi_Msgs Yes
> ## Possible values: Yes/No
> Lan_Enable_Link_Auth Yes
> ## Possible values: Yes/No
> Lan_Enable_Restrict_To_Callback No
> ## Possible values:
> Callback/User/Operator/Administrator/OEM_Proprietary/No_Access
> Lan_Privilege_Limit User
> ## Give valid number
> Lan_Session_Limit 0
> ## Possible values: Yes/No
> Serial_Enable_Ipmi_Msgs Yes
> ## Possible values: Yes/No
> Serial_Enable_Link_Auth Yes
> ## Possible values: Yes/No
> Serial_Enable_Restrict_To_Callback No
> ## Possible values:
> Callback/User/Operator/Administrator/OEM_Proprietary/No_Access
> Serial_Privilege_Limit User
> ## Give valid number
> Serial_Session_Limit 0
> EndSection
> Section User3
> ## Give username
> Username Administrator
> ## Give password or leave it blank to clear password
> Password
> ## Possible values: Yes/No
> Lan_Enable_Ipmi_Msgs Yes
> ## Possible values: Yes/No
> Lan_Enable_Link_Auth Yes
> ## Possible values: Yes/No
> Lan_Enable_Restrict_To_Callback No
> ## Possible values:
> Callback/User/Operator/Administrator/OEM_Proprietary/No_Access
> Lan_Privilege_Limit Administrator
> ## Give valid number
> Lan_Session_Limit 0
> ## Possible values: Yes/No
> Serial_Enable_Ipmi_Msgs Yes
> ## Possible values: Yes/No
> Serial_Enable_Link_Auth Yes
> ## Possible values: Yes/No
> Serial_Enable_Restrict_To_Callback No
> ## Possible values:
> Callback/User/Operator/Administrator/OEM_Proprietary/No_Access
> Serial_Privilege_Limit Administrator
> ## Give valid number
> Serial_Session_Limit 0
> EndSection
> Section User4
> ## Give username
> Username Callback
> ## Give password or leave it blank to clear password
> Password
> ## Possible values: Yes/No
> Lan_Enable_Ipmi_Msgs Yes
> ## Possible values: Yes/No
> Lan_Enable_Link_Auth Yes
> ## Possible values: Yes/No
> Lan_Enable_Restrict_To_Callback No
> ## Possible values:
> Callback/User/Operator/Administrator/OEM_Proprietary/No_Access
> Lan_Privilege_Limit User
> ## Give valid number
> Lan_Session_Limit 0
> ## Possible values: Yes/No
> Serial_Enable_Ipmi_Msgs Yes
> ## Possible values: Yes/No
> Serial_Enable_Link_Auth Yes
> ## Possible values: Yes/No
> Serial_Enable_Restrict_To_Callback No
> ## Possible values:
> Callback/User/Operator/Administrator/OEM_Proprietary/No_Access
> Serial_Privilege_Limit User
> ## Give valid number
> Serial_Session_Limit 0
> EndSection
> Section LAN_Channel
> ## Possible values:
> Disabled/Pre_Boot_Only/Always_Available/Shared
> Volatile_Access_Mode Always_Available
> ## Possible values: Yes/No
> Volatile_Enable_User_Level_Auth Yes
> ## Possible values: Yes/No
> Volatile_Enable_Per_Message_Auth Yes
> ## Possible values: Yes/No
> Volatile_Enable_Pef_Alerting No
> ## Possible values:
> Callback/User/Operator/Administrator/OEM_Proprietary/No_Access
> Volatile_Channel_Privilege_Limit Administrator
> ## Possible values:
> Disabled/Pre_Boot_Only/Always_Available/Shared
> Non_Volatile_Access_Mode Always_Available
> ## Possible values: Yes/No
> Non_Volatile_Enable_User_Level_Auth Yes
> ## Possible values: Yes/No
> Non_Volatile_Enable_Per_Message_Auth Yes
> ## Possible values: Yes/No
> Non_Volatile_Enable_Pef_Alerting No
> ## Possible values:
> Callback/User/Operator/Administrator/OEM_Proprietary/No_Access
> Non_Volatile_Channel_Privilege_Limit Administrator
> EndSection
> Section LAN_Conf
> ## Possible values:
> Unspecified/Static/Use_DHCP/Use_BIOS/Use_Others
> Ip_Address_Source Static
> ## Give valid IP Address
> Ip_Address 192.168.1.100
> ## Give valid MAC Address
> Mac_Address 00:E0:81:2D:8D:F7
> ## Give valid Subnet mask
> Subnet_Mask 255.255.255.0
> ## Give valid IP Address
> Default_Gateway_Ip_Address 192.168.1.1
> ## Give valid MAC Address
> Default_Gateway_Mac_Address 00:00:00:00:00:00
> ## Give valid IP Address
> Backup_Gateway_Ip_Address 192.168.2.0
> ## Give valid MAC Address
> Backup_Gateway_Mac_Address 00:00:00:00:00:00
> EndSection
> Section LAN_Conf_Auth
> ## Possible values: Yes/No
> Callback_Enable_Auth_Type_None Yes
> ## Possible values: Yes/No
> Callback_Enable_Auth_Type_Md2 No
> ## Possible values: Yes/No
> Callback_Enable_Auth_Type_Md5 Yes
> ## Possible values: Yes/No
> Callback_Enable_Auth_Type_Straight_Password Yes
> ## Possible values: Yes/No
> Callback_Enable_Auth_Type_Oem_Proprietary No
> ## Possible values: Yes/No
> User_Enable_Auth_Type_None Yes
> ## Possible values: Yes/No
> User_Enable_Auth_Type_Md2 No
> ## Possible values: Yes/No
> User_Enable_Auth_Type_Md5 Yes
> ## Possible values: Yes/No
> User_Enable_Auth_Type_Straight_Password Yes
> ## Possible values: Yes/No
> User_Enable_Auth_Type_Oem_Proprietary No
> ## Possible values: Yes/No
> Operator_Enable_Auth_Type_None Yes
> ## Possible values: Yes/No
> Operator_Enable_Auth_Type_Md2 No
> ## Possible values: Yes/No
> Operator_Enable_Auth_Type_Md5 Yes
> ## Possible values: Yes/No
> Operator_Enable_Auth_Type_Straight_Password Yes
> ## Possible values: Yes/No
> Operator_Enable_Auth_Type_Oem_Proprietary No
> ## Possible values: Yes/No
> Admin_Enable_Auth_Type_None Yes
> ## Possible values: Yes/No
> Admin_Enable_Auth_Type_Md2 No
> ## Possible values: Yes/No
> Admin_Enable_Auth_Type_Md5 Yes
> ## Possible values: Yes/No
> Admin_Enable_Auth_Type_Straight_Password Yes
> ## Possible values: Yes/No
> Admin_Enable_Auth_Type_Oem_Proprietary No
> ## Possible values: Yes/No
> Oem_Enable_Auth_Type_None Yes
> ## Possible values: Yes/No
> Oem_Enable_Auth_Type_Md2 No
> ## Possible values: Yes/No
> Oem_Enable_Auth_Type_Md5 Yes
> ## Possible values: Yes/No
> Oem_Enable_Auth_Type_Straight_Password Yes
> ## Possible values: Yes/No
> Oem_Enable_Auth_Type_Oem_Proprietary No
> EndSection
> Section LAN_Conf_Misc
> ## Possible values: Yes/No
> Enable_Gratuitous_Arps Yes
> ## Possible values: Yes/No
> Enable_Arp_Response Yes
> ## Give valid number
> Gratuitous_Arp_Interval 4
> EndSection
> Section Serial_Channel
> Error in checkout of key <Volatile_Access_Mode>
> Error in checkout of key <Volatile_Enable_User_Level_Auth>
> Error in checkout of key <Volatile_Enable_Per_Message_Auth>
> Error in checkout of key <Volatile_Enable_Pef_Alerting>
> Error in checkout of key <Volatile_Channel_Privilege_Limit>
> Error in checkout of key <Non_Volatile_Access_Mode>
> Error in checkout of key <Non_Volatile_Enable_User_Level_Auth>
> Error in checkout of key <Non_Volatile_Enable_Per_Message_Auth>
> Error in checkout of key <Non_Volatile_Enable_Pef_Alerting>
> Error in checkout of key <Non_Volatile_Channel_Privilege_Limit>
> EndSection
> Section Serial_Conf
> Error in checkout of key <Enable_Basic_Mode>
> Error in checkout of key <Enable_PPP_Mode>
> Error in checkout of key <Enable_Terminal_Mode>
> Error in checkout of key <Connect_Mode>
> Error in checkout of key <Page_Blackout_Interval>
> Error in checkout of key <Call_Retry_Time>
> Error in checkout of key <Enable_DTR_Hangup>
> Error in checkout of key <Flow_Control>
> Error in checkout of key <Bit_Rate>
> EndSection
>
>
>
> _______________________________________________
> Freeipmi-users mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/freeipmi-users
>