freeipmi-users
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Freeipmi-users] No SDR values from ipmi-sensors on Fujitsu RX300 an


From: Al Chu
Subject: Re: [Freeipmi-users] No SDR values from ipmi-sensors on Fujitsu RX300 and RX300S2
Date: Thu, 15 Sep 2011 09:00:11 -0700

Huh ... but it does work w/ 0.5.1.  Ya know, maybe your SDR is just
buggy.  Even though it advertises that it wants to bridge sensors, in
reality, it shouldn't.  Back in 0.5.1, ipmi-sensors wasn't as
correct/valid, so bridging wasn't handled properly. 

Let me get you a beta tar.gz with a workaround option to try out and see
if that helps.

Al

On Thu, 2011-09-15 at 04:39 -0700, Olaf Morgenstern wrote:
> Hi Al,
> 
> as promised, the debug output from ipmi-sensors v0.5.1, once after a cache 
> flush and once from a filled cache. Don't wonder about the different IP 
> address, it's still a RX300 which was queried. The reason is that I can't 
> query the IPMI LAN interface of the same machine running ipmi-sensors (it's a 
> Broadcom LAN interface and BMC).
> 
> Thanks, Olaf
> 
> 
> -------- Original-Nachricht --------
> > Datum: Wed, 14 Sep 2011 07:47:16 -0700
> > Von: Al Chu <address@hidden>
> > An: "address@hidden" <address@hidden>
> > CC: "address@hidden" <address@hidden>
> > Betreff: Re: [Freeipmi-users] No SDR values from ipmi-sensors on Fujitsu    
> > RX300 and RX300S2
> 
> > Hi,
> > 
> > First, could run the following
> > 
> > ipmi-sensors -f
> > 
> > to flush out the old SDR cache and try ipmi-sensors again (it'll reload
> > the SDR cache).  I'm wondering if there was an SDR format change between
> > versions that is not being caught.
> > 
> > Although I've personally never seen it before, you may want to try the
> > --bridge-sensors option.  It's possible all your motherboard's sensors
> > aren't owned by the BMC.
> > 
> > If that doesn't work, could you send me the ipmi-sensors output w/
> > --debug.
> > 
> > Thanks,
> > Al
> > 
> > On Tue, 2011-09-13 at 23:57 -0700, address@hidden wrote:
> > > I want to monitor my Fujitsu servers with the check-ipmi-sensor plugin
> > (v2) for Nagios. It requires the ipmimonitoring tool from freeipmi.
> > > 
> > > I tried the freeipmi version 0.5.1 shipped with CentOS 5.6. OK, it is
> > really old, but the ipmi-sensors works fine. But the command 
> > "ipmimonitoring"
> > doesn't work - it returns a SDR cache error:
> > > 
> > > address@hidden ~]# ipmimonitoring -h 60.18.18.1 -l user
> > > ipmi_monitoring_sensor_readings_by_record_id: internal error
> > > 
> > > If I use the --debug switch, the additional info is:
> > > 
> > > (ipmi_monitoring_sdr_cache.c, _ipmi_monitoring_sdr_cache_retrieve, 537):
> > ipmi_sdr_cache_complete: incomplete number of records written
> > > 
> > > OK, I assume there will be no support for this old version, neither by
> > the freeipmi developers or Redhat/CentOS.
> > > 
> > > Next I tried the freeipmi version 0.7.16 shipped with CentOS 6. But
> > ipmi-sensors or ipmimonitoring doesn't show any SDR values, it returns only 
> > NA.
> > > 
> > > That's why I have compiled the newest freeipmi 1.0.6 on CentOS 5.6.
> > > But, surprise, ipmi-sensors doesn't show any SDR values, it returns only
> > N/A:
> > > 
> > > 
> > > (0)address@hidden:
> > /home/a18/omo/rpmbuild/BUILD/freeipmi-1.0.6/ipmi-sensors/src $su -c 
> > "./ipmi-sensors -h 18.18.18.2 -l user"
> > > Password:
> > > ID   | Name             | Type                    | Reading    | Units |
> > Event
> > > 0    | Systemboard      | Temperature             | N/A        | C     |
> > N/A
> > > 64   | CPU0             | Temperature             | N/A        | C     |
> > N/A
> > > 128  | CPU1             | Temperature             | N/A        | C     |
> > N/A
> > > 192  | Ambient          | Temperature             | N/A        | C     |
> > N/A
> > > 256  | PSU              | Temperature             | N/A        | C     |
> > N/A
> > > 320  | PSU FanControl   | OEM Reserved            | N/A        | C     |
> > N/A
> > > 384  | PSU Power        | Current                 | N/A        | W     |
> > N/A
> > > 448  | Main +12V        | Voltage                 | N/A        | V     |
> > N/A
> > > 512  | Main -12V        | Voltage                 | N/A        | V     |
> > N/A
> > > 576  | Main +5V         | Voltage                 | N/A        | V     |
> > N/A
> > > 640  | Main 3.3V        | Voltage                 | N/A        | V     |
> > N/A
> > > 704  | Battery +3V      | Voltage                 | N/A        | V     |
> > N/A
> > > 768  | Main 2.5V        | Voltage                 | N/A        | V     |
> > N/A
> > > 832  | Stdby +3.3V      | Voltage                 | N/A        | V     |
> > N/A
> > > 896  | SSTL_Term        | Voltage                 | N/A        | V     |
> > N/A
> > > 960  | Main +1.5V       | Voltage                 | N/A        | V     |
> > N/A
> > > 1024 | VGA +2.5V        | Voltage                 | N/A        | V     |
> > N/A
> > > 1088 | Lan +1.2V        | Voltage                 | N/A        | V     |
> > N/A
> > > 1152 | Lan +2.5V        | Voltage                 | N/A        | V     |
> > N/A
> > > 1216 | SCSI +1.8V       | Voltage                 | N/A        | V     |
> > N/A
> > > 1280 | BMC +2.5V        | Voltage                 | N/A        | V     |
> > N/A
> > > 1344 | FAN SYS0         | Fan                     | N/A        | RPM   |
> > N/A
> > > 1408 | FAN SYS1         | Fan                     | N/A        | RPM   |
> > N/A
> > > 1472 | FAN SYS2         | Fan                     | N/A        | RPM   |
> > N/A
> > > 1536 | FAN PS0          | Fan                     | N/A        | RPM   |
> > N/A
> > > 1600 | FAN SYS3         | Fan                     | N/A        | RPM   |
> > N/A
> > > 1664 | FAN SYS4         | Fan                     | N/A        | RPM   |
> > N/A
> > > 1728 | FAN SYS5         | Fan                     | N/A        | RPM   |
> > N/A
> > > 1792 | FAN PS1          | Fan                     | N/A        | RPM   |
> > N/A
> > > 1856 | FAN CPU0         | Fan                     | N/A        | RPM   |
> > N/A
> > > 1920 | FAN CPU1         | Fan                     | N/A        | RPM   |
> > N/A
> > > 1984 | SEL Level        | Monitor ASIC/IC         | N/A        | %     |
> > N/A
> > > 2048 | CPU0 PRSNT       | Entity Presence         | N/A        | N/A   |
> > N/A
> > > 2096 | CPU0             | Processor               | N/A        | N/A   |
> > N/A
> > > 2144 | CPU1 PRSNT       | Entity Presence         | N/A        | N/A   |
> > N/A
> > > 2192 | CPU1             | Processor               | N/A        | N/A   |
> > N/A
> > > 2240 | PS0 PRSNT        | Entity Presence         | N/A        | N/A   |
> > N/A
> > > 2288 | PS1 PRSNT        | Entity Presence         | N/A        | N/A   |
> > N/A
> > > 2336 | FAN SYS0 PRSNT   | Entity Presence         | N/A        | N/A   |
> > N/A
> > > 2384 | FAN SYS1 PRSNT   | Entity Presence         | N/A        | N/A   |
> > N/A
> > > 2432 | FAN SYS2 PRSNT   | Entity Presence         | N/A        | N/A   |
> > N/A
> > > 2480 | FAN PS0 PRSNT    | Entity Presence         | N/A        | N/A   |
> > N/A
> > > 2528 | FAN SYS3 PRSNT   | Entity Presence         | N/A        | N/A   |
> > N/A
> > > 2576 | FAN SYS4 PRSNT   | Entity Presence         | N/A        | N/A   |
> > N/A
> > > 2624 | FAN SYS5 PRSNT   | Entity Presence         | N/A        | N/A   |
> > N/A
> > > 2672 | FAN PS1 PRSNT    | Entity Presence         | N/A        | N/A   |
> > N/A
> > > 2720 | FAN SYS0 STAT    | OEM Reserved            | N/A        | N/A   |
> > N/A
> > > 2768 | FAN SYS1 STAT    | OEM Reserved            | N/A        | N/A   |
> > N/A
> > > 2816 | FAN SYS2 STAT    | OEM Reserved            | N/A        | N/A   |
> > N/A
> > > 2864 | FAN PS0 STAT     | OEM Reserved            | N/A        | N/A   |
> > N/A
> > > 2912 | FAN SYS3 STAT    | OEM Reserved            | N/A        | N/A   |
> > N/A
> > > 2960 | FAN SYS4 STAT    | OEM Reserved            | N/A        | N/A   |
> > N/A
> > > 3008 | FAN SYS5 STAT    | OEM Reserved            | N/A        | N/A   |
> > N/A
> > > 3056 | FAN PS1 STAT     | OEM Reserved            | N/A        | N/A   |
> > N/A
> > > 3104 | PS0 STAT         | OEM Reserved            | N/A        | N/A   |
> > N/A
> > > 3152 | PS1 STAT         | OEM Reserved            | N/A        | N/A   |
> > N/A
> > > 3200 | FAN CPU0 STAT    | OEM Reserved            | N/A        | N/A   |
> > N/A
> > > 3248 | FAN CPU1 STAT    | OEM Reserved            | N/A        | N/A   |
> > N/A
> > > 3296 | ACPI Power State | System ACPI Power State | N/A        | N/A   |
> > N/A
> > > 3344 | Watchdog         | Watchdog 2              | N/A        | N/A   |
> > N/A
> > > 3392 | PSU RED PRSNT    | Entity Presence         | N/A        | N/A   |
> > N/A
> > > 3440 | PSU RED STAT     | OEM Reserved            | N/A        | N/A   |
> > N/A
> > > 3488 | PSU status       | Power Unit              | N/A        | N/A   |
> > N/A
> > > 3536 | BMC request      | OEM Reserved            | N/A        | N/A   |
> > N/A
> > > 4736 | System Mgmt SW   | OEM Reserved            | N/A        | N/A   |
> > N/A
> > > 4784 | System BIOS      | OEM Reserved            | N/A        | N/A   |
> > N/A
> > > 4832 | BMC              | OEM Reserved            | N/A        | N/A   |
> > N/A
> > > (0)address@hidden:
> > /home/a18/omo/rpmbuild/BUILD/freeipmi-1.0.6/ipmi-sensors/src $su -c 
> > "./ipmi-sensors -h 18.18.18.2 -l user -s 0 -v"
> > > Password:
> > > Record ID: 0
> > > ID String: Systemboard
> > > Sensor Type: Temperature (1h)
> > > Sensor Number: 1
> > > IPMB Slave Address: 12h
> > > Sensor Owner ID: 24h
> > > Sensor Owner LUN: 0h
> > > Channel Number: 0h
> > > Entity ID: system board (7)
> > > Entity Instance: 0
> > > Entity Instance Type: Physical Entity
> > > Event/Reading Type Code: 1h
> > > Sensor Min. Reading: -128.000000 C
> > > Sensor Max. Reading: 127.000000 C
> > > Normal Min.: N/A
> > > Normal Max.: N/A
> > > Nominal Reading: N/A
> > > Sensor Reading: N/A
> > > Sensor Event: N/A
> > > 
> > > (0)address@hidden:
> > /home/a18/omo/rpmbuild/BUILD/freeipmi-1.0.6/ipmi-sensors/src $
> > > 
> > > 
> > > 
> > > Which information should I provide to track the bug?
> > > 
> > > Kind regards,
> > > omo
> > > 
> > > _______________________________________________
> > > Freeipmi-users mailing list
> > > address@hidden
> > > https://lists.gnu.org/mailman/listinfo/freeipmi-users
> > -- 
> > Albert Chu
> > address@hidden
> > Computer Scientist
> > High Performance Systems Division
> > Lawrence Livermore National Laboratory
> > 
-- 
Albert Chu
address@hidden
Computer Scientist
High Performance Systems Division
Lawrence Livermore National Laboratory




reply via email to

[Prev in Thread] Current Thread [Next in Thread]