[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Freeipmi-users] Fan Sensor not correctly reported
From: |
Philipp Naether |
Subject: |
[Freeipmi-users] Fan Sensor not correctly reported |
Date: |
Mon, 14 Oct 2013 14:13:35 +0200 |
Hi guys,
on our HP DL380 G6/7 servers FreeIPMI reports the fan sensors with
wrong values:
address@hidden sbin]# ./ipmi-sensors -h *** -u *** -p *** -D LAN_2_0 -r 8
-vv
Record ID: 8
Record Type: Full Sensor Record (1h)
ID String: Fan 2
Sensor Type: Fan (4h)
Sensor Number: 7
IPMB Slave Address: 10h
Sensor Owner ID: 20h
Sensor Owner LUN: 0h
Channel Number: 0h
Entity ID: system board (7)
Entity Instance: 2
Entity Instance Type: Physical Entity
Event/Reading Type Code: Ah
Accuracy: 0.000000%
Sensor Direction: Unspecified
The verbose output of ipmitool reports the following:
address@hidden bin]# ./ipmitool -I lanplus -H *** -U *** -P *** sensor
-v
Sensor ID: Fan Block 1 (0x9)
Entity ID: 7.1
Sensor Type (Discrete): Fan
Sensor Reading: 19.208 percent
States Asserted: Availability State
[Transition to Running]
Important there is that ipmitool reports the value and the unit
correctly. But FreeIPMI reports it as N/A. I was told that FreeIPMI
might not be able to interpret this data correctly and I should write to
this to the mailing list.
Further information of the affected systems:
#bmc-info
Device ID : 17
Device Revision : 1
Device SDRs : supported
Firmware Revision : 2.22
Device Available : yes (normal operation)
IPMI Version : 2.0
Sensor Device : supported
SDR Repository Device : supported
SEL Device : supported
FRU Inventory Device : supported
IPMB Event Receiver : unsupported
IPMB Event Generator : unsupported
Bridge : unsupported
Chassis Device : unsupported
Manufacturer ID : Hewlett-Packard (11)
Product ID : 8192
Channel Information
Channel Number : 2
Medium Type : 802.3 LAN
Protocol Type : IPMB-1.0
Active Session Count : 0
Session Support : multi-session
Vendor ID : Intelligent Platform Management Interface forum
(7154)
Channel Number : 7
Medium Type : OEM
Protocol Type : KCS
Active Session Count : 0
Session Support : session-less
Vendor ID : Intelligent Platform Management Interface forum
(7154)
#ipmi-sensors -V
ipmi-sensors - 1.3.2
Copyright (C) 2003-2013 FreeIPMI Core Team
This program is free software; you may redistribute it under the terms
of
the GNU General Public License. This program has absolutely no
warranty.
#ipmi-sensors --interpret-oem-data --output-sensor-state
Caching SDR repository information:
/root/.freeipmi/sdr-cache/sdr-cache-icinga.192.168.5.207
Caching SDR record 47 of 47 (current record ID 46)
ID | Name | Type | State | Reading | Units |
Event
1 | UID Light | OEM Reserved | N/A | N/A | N/A |
'OK'
2 | Sys. Health LED | OEM Reserved | N/A | N/A | N/A |
'OK'
3 | Power Supply 1 | Power Supply | Nominal | N/A | N/A |
'Presence detected'
4 | Power Supply 2 | Power Supply | Nominal | N/A | N/A |
'Presence detected'
5 | Power Supplies | Power Supply | Nominal | N/A | N/A |
'Fully Redundant'
7 | Fan 1 | Fan | Nominal | N/A | N/A |
'transition to Running'
8 | Fan 2 | Fan | Nominal | N/A | N/A |
'transition to Running'
9 | Fan 3 | Fan | Nominal | N/A | N/A |
'transition to Running'
10 | Fan 4 | Fan | Nominal | N/A | N/A |
'transition to Running'
11 | Fan 5 | Fan | N/A | N/A | N/A |
N/A
12 | Fan 6 | Fan | N/A | N/A | N/A |
N/A
13 | Fans | Fan | Nominal | N/A | N/A |
'Fully Redundant'
15 | Temp 1 | Temperature | Nominal | 17.00 | C |
'OK'
16 | Temp 2 | Temperature | Nominal | 40.00 | C |
'OK'
17 | Temp 3 | Temperature | N/A | N/A | C |
N/A
18 | Temp 4 | Temperature |
Nominal | 29.00 | C |
'OK'
19 | Temp 5 | Temperature | Nominal | 29.00 | C |
'OK'
20 | Temp 6 | Temperature | N/A | N/A | C |
N/A
21 | Temp 7 | Temperature | N/A | N/A | C |
N/A
22 | Temp 8 | Temperature | Nominal | 38.00 | C |
'OK'
23 | Temp 9 | Temperature | Nominal | 31.00 | C |
'OK'
24 | Temp 10 | Temperature | Nominal | 40.00 | C |
'OK'
25 | Temp 11 | Temperature | Nominal | 32.00 | C |
'OK'
26 | Temp 12 | Temperature | Nominal | 41.00 | C |
'OK'
27 | Temp 13 | Temperature | Nominal | 0.00 | C |
'OK'
28 | Temp 14 | Temperature | Nominal | 0.00 | C |
'OK'
29 | Temp 15 | Temperature | Nominal | 0.00 | C |
'OK'
30 | Temp 16 | Temperature | N/A | N/A | C |
N/A
31 | Temp 17 | Temperature | N/A | N/A | C |
N/A
32 | Temp 18 | Temperature | N/A | N/A | C |
N/A
33 | Temp 19 | Temperature | Nominal | 22.00 | C |
'OK'
34 | Temp 20 | Temperature | Nominal | 27.00 | C |
'OK'
35 | Temp 21 | Temperature | Nominal | 29.00 | C |
'OK'
36 | Temp 22 | Temperature | Nominal | 27.00 | C |
'OK'
37 | Temp 23 | Temperature | Nominal | 36.00 | C |
'OK'
38 | Temp 24 | Temperature | Nominal | 30.00 | C |
'OK'
39 | Temp 25 | Temperature | Nominal | 27.00 | C |
'OK'
40 | Temp 26 | Temperature | Nominal | 27.00 | C |
'OK'
41 | Temp 27 | Temperature | Nominal | 0.00 | C |
'OK'
42 | Temp 28 | Temperature | N/A | N/A | C |
N/A
43 | Temp 29 | Temperature | Nominal | 35.00 | C |
'OK'
44 | Temp 30 | Temperature | Nominal | 63.00 | C |
'OK'
45 | Memory | Memory | Warning | N/A | N/A |
'Correctable memory error' 'Presence detected'
46 | Power Meter | Current | N/A | N/A | N/A |
'Device Enabled'
]# ./ipmi-sensors --interpret-oem-data --output-sensor-state
--ignore-not-available-sensors
ID | Name | Type | State | Reading | Units |
Event
1 | UID Light | OEM Reserved | N/A | N/A | N/A |
'OK'
2 | Sys. Health LED | OEM Reserved | N/A | N/A | N/A |
'OK'
3 | Power Supply 1 | Power Supply | Nominal | N/A | N/A |
'Presence detected'
4 | Power Supply 2 | Power Supply | Nominal | N/A | N/A |
'Presence detected'
5 | Power Supplies | Power Supply | Nominal | N/A | N/A |
'Fully Redundant'
7 | Fan 1 | Fan | Nominal | N/A | N/A |
'transition to Running'
8 | Fan 2 | Fan | Nominal | N/A | N/A |
'transition to Running'
9 | Fan 3 | Fan | Nominal | N/A | N/A |
'transition to Running'
10 | Fan 4 | Fan | Nominal | N/A | N/A |
'transition to Running'
13 | Fans | Fan | Nominal | N/A | N/A |
'Fully Redundant'
15 | Temp 1 | Temperature | Nominal | 17.00 | C |
'OK'
16 | Temp 2 | Temperature | Nominal | 40.00 | C |
'OK'
18 | Temp 4 | Temperature | Nominal | 29.00 | C |
'OK'
19 | Temp 5 | Temperature | Nominal | 29.00 | C |
'OK'
22 | Temp 8 | Temperature | Nominal | 38.00 | C |
'OK'
23 | Temp 9 | Temperature | Nominal | 31.00 | C |
'OK'
24 | Temp 10 | Temperature | Nominal | 40.00 | C |
'OK'
25 | Temp 11 | Temperature | Nominal | 32.00 | C |
'OK'
26 | Temp 12 | Temperature | Nominal | 41.00 | C |
'OK'
27 | Temp 13 | Temperature | Nominal | 0.00 | C |
'OK'
28 |
Temp 14 | Temperature | Nominal | 0.00 | C |
'OK'
29 | Temp 15 | Temperature | Nominal | 0.00 | C |
'OK'
33 | Temp 19 | Temperature | Nominal | 22.00 | C |
'OK'
34 | Temp 20 | Temperature | Nominal | 28.00 | C |
'OK'
35 | Temp 21 | Temperature | Nominal | 29.00 | C |
'OK'
36 | Temp 22 | Temperature | Nominal | 27.00 | C |
'OK'
37 | Temp 23 | Temperature | Nominal | 36.00 | C |
'OK'
38 | Temp 24 | Temperature | Nominal | 30.00 | C |
'OK'
39 | Temp 25 | Temperature | Nominal | 27.00 | C |
'OK'
40 | Temp 26 | Temperature | Nominal | 27.00 | C |
'OK'
41 | Temp 27 | Temperature | Nominal | 0.00 | C |
'OK'
43 | Temp 29 | Temperature | Nominal | 35.00 | C |
'OK'
44 | Temp 30 | Temperature | Nominal | 63.00 | C |
'OK'
45 | Memory | Memory | Warning | N/A | N/A |
'Correctable memory error' 'Presence detected'
46 | Power Meter | Current | N/A | N/A | N/A |
'Device Enabled'
I hope there is a way to fix this issue.
Best regards!
Philipp
Mit freundlichen Grüßen
Philipp Näther
Datenverarbeitung
Stadt Meißen
Markt 1, 01662 Meißen
Tel.: +49 3521 467-216
Fax: +49 3521 467-280
address@hidden
www.stadt-meissen.de
- [Freeipmi-users] Fan Sensor not correctly reported,
Philipp Naether <=