[Freeipmi-users] PS Status showing Unrecognized Event after upgrading a supermicro X8 mobo ipmimodule to fw 3.12

[Ingard Mevåg]

Hi guys

I've been upgrading the firmware on the ipmi module on some
supermicro X8SIU recently and I'm now experiencing problems with the PS
Status sensor. Is there anything I can do to make the sensor detect the
PSUs properly?

Link to board:
http://www.supermicro.com/products/motherboard/Xeon3000/3400/X8SIU.cfm?IPMI=Y
The latest firmware as of now is version 3.12.
Output from ipmimonitoring:
address@hidden:/usr/local# ./sbin/ipmimonitoring -V
ipmi-sensors - 1.4.0.beta0

address@hidden:/usr/local# ./sbin/ipmimonitoring
ID   | Name          | Type              | State    | Reading    | Units |
Event
4    | System Temp   | Temperature       | Nominal  | 32.00      | C     |
'OK'
71   | CPU Temp      | OEM Reserved      | N/A      | N/A        | N/A   |
'OEM Event = 0000h'
205  | FAN 2         | Fan               | Nominal  | 1695.00    | RPM   |
'OK'
272  | FAN 3         | Fan               | Nominal  | 4655.00    | RPM   |
'OK'
473  | CPU Vcore     | Voltage           | Nominal  | 0.85       | V     |
'OK'
540  | +3.3VCC       | Voltage           | Nominal  | 3.31       | V     |
'OK'
607  | +12 V         | Voltage           | Nominal  | 12.19      | V     |
'OK'
674  | CPU DIMM      | Voltage           | Nominal  | 1.54       | V     |
'OK'
741  | +5 V          | Voltage           | Nominal  | 5.15       | V     |
'OK'
808  | -12 V         | Voltage           | Nominal  | -12.48     | V     |
'OK'
875  | VBAT          | Voltage           | Nominal  | 3.25       | V     |
'OK'
942  | +3.3VSB       | Voltage           | Nominal  | 3.30       | V     |
'OK'
1009 | AVCC          | Voltage           | Nominal  | 3.31       | V     |
'OK'
1076 | Chassis Intru | Physical Security | Nominal  | N/A        | N/A   |
'OK'
1143 | PS Status     | Power Supply      | N/A      | N/A        | N/A   |
'Unrecognized Event = 0100h' 'Unrecognized Event = 0200h' 'Unrecognized
Event = 0400h' 'Unrecognized Event = 0800h' 'Unrecognized Event = 1000h'
'Unrecognized Event = 2000h' 'Unrecognized Event = 4000h'

Kind Regards
Ingard