Re: [Freeipmi-users] PS Status showing Unrecognized Event after upgrading a supermicro X8 mobo ipmimodule to fw 3.12

[Al Chu]

Hi Ingard,

This sounds familiar, although I cannot recall how to fix it through the
firmware. It's possible a cold reset of the BMC could to it.   You can
do a cold reset via

> bmc-device --cold-reset

If that doesn't work, you can tell ipmimonitoring to ignore unrecognized
events via the --ignore-unrecognized-events option.  After that
everything should work.

Al

On Thu, 2014-02-13 at 16:17 +0100, Ingard Mevåg wrote:
> Hi guys
> 
> I've been upgrading the firmware on the ipmi module on some
> supermicro X8SIU recently and I'm now experiencing problems with the PS
> Status sensor. Is there anything I can do to make the sensor detect the
> PSUs properly?
> 
> Link to board:
> http://www.supermicro.com/products/motherboard/Xeon3000/3400/X8SIU.cfm?IPMI=Y
> The latest firmware as of now is version 3.12.
> Output from ipmimonitoring:
> address@hidden:/usr/local# ./sbin/ipmimonitoring -V
> ipmi-sensors - 1.4.0.beta0
> 
> address@hidden:/usr/local# ./sbin/ipmimonitoring
> ID   | Name          | Type              | State    | Reading    | Units |
> Event
> 4    | System Temp   | Temperature       | Nominal  | 32.00      | C     |
> 'OK'
> 71   | CPU Temp      | OEM Reserved      | N/A      | N/A        | N/A   |
> 'OEM Event = 0000h'
> 205  | FAN 2         | Fan               | Nominal  | 1695.00    | RPM   |
> 'OK'
> 272  | FAN 3         | Fan               | Nominal  | 4655.00    | RPM   |
> 'OK'
> 473  | CPU Vcore     | Voltage           | Nominal  | 0.85       | V     |
> 'OK'
> 540  | +3.3VCC       | Voltage           | Nominal  | 3.31       | V     |
> 'OK'
> 607  | +12 V         | Voltage           | Nominal  | 12.19      | V     |
> 'OK'
> 674  | CPU DIMM      | Voltage           | Nominal  | 1.54       | V     |
> 'OK'
> 741  | +5 V          | Voltage           | Nominal  | 5.15       | V     |
> 'OK'
> 808  | -12 V         | Voltage           | Nominal  | -12.48     | V     |
> 'OK'
> 875  | VBAT          | Voltage           | Nominal  | 3.25       | V     |
> 'OK'
> 942  | +3.3VSB       | Voltage           | Nominal  | 3.30       | V     |
> 'OK'
> 1009 | AVCC          | Voltage           | Nominal  | 3.31       | V     |
> 'OK'
> 1076 | Chassis Intru | Physical Security | Nominal  | N/A        | N/A   |
> 'OK'
> 1143 | PS Status     | Power Supply      | N/A      | N/A        | N/A   |
> 'Unrecognized Event = 0100h' 'Unrecognized Event = 0200h' 'Unrecognized
> Event = 0400h' 'Unrecognized Event = 0800h' 'Unrecognized Event = 1000h'
> 'Unrecognized Event = 2000h' 'Unrecognized Event = 4000h'
> 
> Kind Regards
> Ingard
> _______________________________________________
> Freeipmi-users mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/freeipmi-users
-- 
Albert Chu
address@hidden
Computer Scientist
High Performance Systems Division
Lawrence Livermore National Laboratory