[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Freeipmi-users] PS Status showing Unrecognized Event after upgradin
|
From: |
Ingard Mevåg |
|
Subject: |
Re: [Freeipmi-users] PS Status showing Unrecognized Event after upgrading a supermicro X8 mobo ipmimodule to fw 3.12 |
|
Date: |
Mon, 17 Feb 2014 13:02:06 +0100 |
Hi again Al and thanks for your help so far!
After a lot of googling I've found this post which might have some of the
information:
http://www.tummy.com/articles/supermicro-ipmi-nagios-check/
Below is the output of the cmds you suggested:
address@hidden:~# ipmi-fru
FRU Inventory Device: BMC FRU (ID 00h)
FRU Error: board info area checksum invalid
FRU Error: product info area checksum invalid
address@hidden:~# ipmi-fru --bridge-fru
FRU Inventory Device: BMC FRU (ID 00h)
FRU Error: board info area checksum invalid
FRU Error: product info area checksum invalid
address@hidden:~# ipmi-sensors --bridge-sensors
ID | Name | Type | Reading | Units | Event
4 | System Temp | Temperature | 30.00 | C | 'OK'
71 | CPU Temp | OEM Reserved | N/A | N/A | 'OEM Event
= 0000h'
138 | FAN 1 | Fan | N/A | RPM | N/A
205 | FAN 2 | Fan | 1695.00 | RPM | 'OK'
272 | FAN 3 | Fan | 4470.00 | RPM | 'OK'
339 | FAN 4 | Fan | N/A | RPM | N/A
406 | FAN 5 | Fan | N/A | RPM | N/A
473 | CPU Vcore | Voltage | 0.86 | V | 'OK'
540 | +3.3VCC | Voltage | 3.31 | V | 'OK'
607 | +12 V | Voltage | 12.19 | V | 'OK'
674 | CPU DIMM | Voltage | 1.54 | V | 'OK'
741 | +5 V | Voltage | 5.15 | V | 'OK'
808 | -12 V | Voltage | -12.48 | V | 'OK'
875 | VBAT | Voltage | 3.25 | V | 'OK'
942 | +3.3VSB | Voltage | 3.30 | V | 'OK'
1009 | AVCC | Voltage | 3.31 | V | 'OK'
1076 | Chassis Intru | Physical Security | N/A | N/A | 'OK'
1143 | PS Status | Power Supply | N/A | N/A |
'Unrecognized Event = 0100h' 'Unrecognized Event = 0200h' 'Unrecognized
Event = 0400h' 'Unrecognized Event = 0800h' 'Unrecognized Event = 1000h'
'Unrecognized Event = 2000h' 'Unrecognized Event = 4000h'
address@hidden:~# ipmi-sensors --shared-sensors
ID | Name | Type | Reading | Units | Event
4 | System Temp | Temperature | 30.00 | C | 'OK'
71 | CPU Temp | OEM Reserved | N/A | N/A | 'OEM Event
= 0000h'
138 | FAN 1 | Fan | N/A | RPM | N/A
205 | FAN 2 | Fan | 1695.00 | RPM | 'OK'
272 | FAN 3 | Fan | 4655.00 | RPM | 'OK'
339 | FAN 4 | Fan | N/A | RPM | N/A
406 | FAN 5 | Fan | N/A | RPM | N/A
473 | CPU Vcore | Voltage | 0.86 | V | 'OK'
540 | +3.3VCC | Voltage | 3.31 | V | 'OK'
607 | +12 V | Voltage | 12.19 | V | 'OK'
674 | CPU DIMM | Voltage | 1.54 | V | 'OK'
741 | +5 V | Voltage | 5.15 | V | 'OK'
808 | -12 V | Voltage | -12.29 | V | 'OK'
875 | VBAT | Voltage | 3.25 | V | 'OK'
942 | +3.3VSB | Voltage | 3.30 | V | 'OK'
1009 | AVCC | Voltage | 3.31 | V | 'OK'
1076 | Chassis Intru | Physical Security | N/A | N/A | 'OK'
1143 | PS Status | Power Supply | N/A | N/A |
'Unrecognized Event = 0100h' 'Unrecognized Event = 0200h' 'Unrecognized
Event = 0400h' 'Unrecognized Event = 0800h' 'Unrecognized Event = 1000h'
'Unrecognized Event = 2000h' 'Unrecognized Event = 4000h'
Kind regards
Ingard
2014-02-15 19:22 GMT+01:00 Al Chu <address@hidden>:
> Hi Ingard,
>
> I realized another possibility. The sensor could be "shared". So you
> could try the --shared-sensors option.
>
> Al
>
> On Fri, 2014-02-14 at 10:26 -0800, Albert Chu wrote:
> > Hi Ingard,
> >
> > Searching through the NEWS file it was released in FreeIPMI 1.0.2.
> >
> > Is it possible you're looking at FRU info? (b/c the option is called
> > -psfruinfo). You can try ipmi-fru with the --bridge-fru option and see
> > if that works.
> >
> > Also try running ipmi-sensors with --bridge-sensors. If that doesn't
> > work, then this might be an OEM extension from Supermicro. The Slave
> > Addresses they list (0x70 and 0x72) are not the defaults. If
> > ipmi-sensors cannot find this sensor in the SDR (sensor data
> > repository), then Supermicro is getting this through some other means
> > that isn't standard.
> >
> > If you ask Supermicro for the OEM extension information, then it's
> > possible it could be added into FreeIPMI.
> >
> > Al
> >
> > It appears in the ipmicfg example below that they are going through the
> FRU to get information.
> >
> > On Fri, 2014-02-14 at 08:14 +0100, ingard Mevåg wrote:
> > > Hi Al
> > >
> > > Thanks for the information. I had already tried to reset the device,
> but running with --ignore-unrecognized-events did the trick :)
> > > At least my monitoring is happy now for this one node running latest
> beta. I was wondering if you knew when this feature got introduced and/or
> if there are deb packages for the ubuntu LTS releases somewhere? I've got
> quite a few Lucid and Precise servers running version 0.7.15 and 0.8.12.
> > >
> > > Also, is it possible to get information per PSU somehow? Supermicro's
> ipmicfg gives the following for instance:
> > >
> > > address@hidden:~/ipmicfg_1.14.3_20130725/linux/64bit#
> ./ipmicfg-linux.x86_64 -psfruinfo
> > > [SlaveAddress = 70h] [Module 1]
> > > Item | Value
> > > ---- | -----
> > > Status | On
> > > Temperature | 29C/84F
> > > Fan 1 | 7213 RPM
> > > Fan 2 | 10076 RPM
> > >
> > > [SlaveAddress = 72h] [Module 2]
> > > Item | Value
> > > ---- | -----
> > > Status | On
> > > Temperature | 28C/82F
> > > Fan 1 | 7213 RPM
> > > Fan 2 | 9732 RPM
> > >
> > > Regards
> > > Ingard
> > >
> > > On 13 Feb 2014, at 17:12, Al Chu <address@hidden> wrote:
> > >
> > > > Hi Ingard,
> > > >
> > > > This sounds familiar, although I cannot recall how to fix it through
> the
> > > > firmware. It's possible a cold reset of the BMC could to it. You
> can
> > > > do a cold reset via
> > > >
> > > >> bmc-device --cold-reset
> > > >
> > > > If that doesn't work, you can tell ipmimonitoring to ignore
> unrecognized
> > > > events via the --ignore-unrecognized-events option. After that
> > > > everything should work.
> > > >
> > > > Al
> > > >
> > > > On Thu, 2014-02-13 at 16:17 +0100, Ingard Mevåg wrote:
> > > >> Hi guys
> > > >>
> > > >> I've been upgrading the firmware on the ipmi module on some
> > > >> supermicro X8SIU recently and I'm now experiencing problems with
> the PS
> > > >> Status sensor. Is there anything I can do to make the sensor detect
> the
> > > >> PSUs properly?
> > > >>
> > > >> Link to board:
> > > >>
> http://www.supermicro.com/products/motherboard/Xeon3000/3400/X8SIU.cfm?IPMI=Y
> > > >> The latest firmware as of now is version 3.12.
> > > >> Output from ipmimonitoring:
> > > >> address@hidden:/usr/local# ./sbin/ipmimonitoring -V
> > > >> ipmi-sensors - 1.4.0.beta0
> > > >>
> > > >> address@hidden:/usr/local# ./sbin/ipmimonitoring
> > > >> ID | Name | Type | State | Reading |
> Units |
> > > >> Event
> > > >> 4 | System Temp | Temperature | Nominal | 32.00 |
> C |
> > > >> 'OK'
> > > >> 71 | CPU Temp | OEM Reserved | N/A | N/A |
> N/A |
> > > >> 'OEM Event = 0000h'
> > > >> 205 | FAN 2 | Fan | Nominal | 1695.00 |
> RPM |
> > > >> 'OK'
> > > >> 272 | FAN 3 | Fan | Nominal | 4655.00 |
> RPM |
> > > >> 'OK'
> > > >> 473 | CPU Vcore | Voltage | Nominal | 0.85 |
> V |
> > > >> 'OK'
> > > >> 540 | +3.3VCC | Voltage | Nominal | 3.31 |
> V |
> > > >> 'OK'
> > > >> 607 | +12 V | Voltage | Nominal | 12.19 |
> V |
> > > >> 'OK'
> > > >> 674 | CPU DIMM | Voltage | Nominal | 1.54 |
> V |
> > > >> 'OK'
> > > >> 741 | +5 V | Voltage | Nominal | 5.15 |
> V |
> > > >> 'OK'
> > > >> 808 | -12 V | Voltage | Nominal | -12.48 |
> V |
> > > >> 'OK'
> > > >> 875 | VBAT | Voltage | Nominal | 3.25 |
> V |
> > > >> 'OK'
> > > >> 942 | +3.3VSB | Voltage | Nominal | 3.30 |
> V |
> > > >> 'OK'
> > > >> 1009 | AVCC | Voltage | Nominal | 3.31 |
> V |
> > > >> 'OK'
> > > >> 1076 | Chassis Intru | Physical Security | Nominal | N/A |
> N/A |
> > > >> 'OK'
> > > >> 1143 | PS Status | Power Supply | N/A | N/A |
> N/A |
> > > >> 'Unrecognized Event = 0100h' 'Unrecognized Event = 0200h'
> 'Unrecognized
> > > >> Event = 0400h' 'Unrecognized Event = 0800h' 'Unrecognized Event =
> 1000h'
> > > >> 'Unrecognized Event = 2000h' 'Unrecognized Event = 4000h'
> > > >>
> > > >> Kind Regards
> > > >> Ingard
> > > >> _______________________________________________
> > > >> Freeipmi-users mailing list
> > > >> address@hidden
> > > >> https://lists.gnu.org/mailman/listinfo/freeipmi-users
> > > > --
> > > > Albert Chu
> > > > address@hidden
> > > > Computer Scientist
> > > > High Performance Systems Division
> > > > Lawrence Livermore National Laboratory
> > > >
> > >
> --
> Albert Chu
> address@hidden
> Computer Scientist
> High Performance Systems Division
> Lawrence Livermore National Laboratory
>
>
--
Ingard Mevåg
Driftssjef
JottaCloud
Mobil: +47 450 22 834
E-post: address@hidden
Webside: www.jottacloud.com