[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Freeipmi-users] PS Status showing Unrecognized Event after upgradin
From: |
Ingard Mevåg |
Subject: |
Re: [Freeipmi-users] PS Status showing Unrecognized Event after upgrading a supermicro X8 mobo ipmimodule to fw 3.12 |
Date: |
Mon, 17 Feb 2014 13:51:56 +0100 |
Also if relevant, here is the output from ipmicfg -pminfo. I noticed that
the Slave Address is different here from the output of the -psfruinfo cmd.
address@hidden:~/ipmicfg_1.14.3_20130725/linux/64bit#
./ipmicfg-linux.x86_64.static -pminfo
[SlaveAddress = 78h] [Module 1]
Item | Value
---- | -----
Status | [NONE OF THE ABOVE](01h)
AC Input Voltage | 230.5 V
AC Input Current | 0.81 A
DC 12V Output Voltage | 12.18 V
DC 12V Output Current | 9.50 A
Temperature 1 | 29C/84F
Temperature 2 | 0C/32F
Fan 1 | 7296 RPM
Fan 2 | 10080 RPM
DC 12V Output Power | 114 W
AC Input Power | 178 W
PMBus Revision |
PWS Serial Number |
PWS Module Number | PWS-1K41P-1R
PWS Revision | REV1.1
[SlaveAddress = 7Ah] [Module 2]
Item | Value
---- | -----
Status | [NONE OF THE ABOVE](01h)
AC Input Voltage | 229.5 V
AC Input Current | 0.64 A
DC 12V Output Voltage | 12.18 V
DC 12V Output Current | 9.50 A
Temperature 1 | 28C/82F
Temperature 2 | 0C/32F
Fan 1 | 7232 RPM
Fan 2 | 9632 RPM
DC 12V Output Power | 114 W
AC Input Power | 138 W
PMBus Revision |
PWS Serial Number | ```````````````
PWS Module Number | PWS-1K41P-1R
PWS Revision | REV1.1
2014-02-17 13:02 GMT+01:00 Ingard Mevåg <address@hidden>:
> Hi again Al and thanks for your help so far!
>
> After a lot of googling I've found this post which might have some of the
> information:
> http://www.tummy.com/articles/supermicro-ipmi-nagios-check/
>
> Below is the output of the cmds you suggested:
>
> address@hidden:~# ipmi-fru
> FRU Inventory Device: BMC FRU (ID 00h)
>
> FRU Error: board info area checksum invalid
>
> FRU Error: product info area checksum invalid
> address@hidden:~# ipmi-fru --bridge-fru
> FRU Inventory Device: BMC FRU (ID 00h)
>
> FRU Error: board info area checksum invalid
>
> FRU Error: product info area checksum invalid
> address@hidden:~# ipmi-sensors --bridge-sensors
> ID | Name | Type | Reading | Units | Event
> 4 | System Temp | Temperature | 30.00 | C | 'OK'
> 71 | CPU Temp | OEM Reserved | N/A | N/A | 'OEM Event
> = 0000h'
> 138 | FAN 1 | Fan | N/A | RPM | N/A
> 205 | FAN 2 | Fan | 1695.00 | RPM | 'OK'
> 272 | FAN 3 | Fan | 4470.00 | RPM | 'OK'
> 339 | FAN 4 | Fan | N/A | RPM | N/A
> 406 | FAN 5 | Fan | N/A | RPM | N/A
> 473 | CPU Vcore | Voltage | 0.86 | V | 'OK'
> 540 | +3.3VCC | Voltage | 3.31 | V | 'OK'
> 607 | +12 V | Voltage | 12.19 | V | 'OK'
> 674 | CPU DIMM | Voltage | 1.54 | V | 'OK'
> 741 | +5 V | Voltage | 5.15 | V | 'OK'
> 808 | -12 V | Voltage | -12.48 | V | 'OK'
> 875 | VBAT | Voltage | 3.25 | V | 'OK'
> 942 | +3.3VSB | Voltage | 3.30 | V | 'OK'
> 1009 | AVCC | Voltage | 3.31 | V | 'OK'
> 1076 | Chassis Intru | Physical Security | N/A | N/A | 'OK'
> 1143 | PS Status | Power Supply | N/A | N/A |
> 'Unrecognized Event = 0100h' 'Unrecognized Event = 0200h' 'Unrecognized
> Event = 0400h' 'Unrecognized Event = 0800h' 'Unrecognized Event = 1000h'
> 'Unrecognized Event = 2000h' 'Unrecognized Event = 4000h'
> address@hidden:~# ipmi-sensors --shared-sensors
> ID | Name | Type | Reading | Units | Event
> 4 | System Temp | Temperature | 30.00 | C | 'OK'
> 71 | CPU Temp | OEM Reserved | N/A | N/A | 'OEM Event
> = 0000h'
> 138 | FAN 1 | Fan | N/A | RPM | N/A
> 205 | FAN 2 | Fan | 1695.00 | RPM | 'OK'
> 272 | FAN 3 | Fan | 4655.00 | RPM | 'OK'
> 339 | FAN 4 | Fan | N/A | RPM | N/A
> 406 | FAN 5 | Fan | N/A | RPM | N/A
> 473 | CPU Vcore | Voltage | 0.86 | V | 'OK'
> 540 | +3.3VCC | Voltage | 3.31 | V | 'OK'
> 607 | +12 V | Voltage | 12.19 | V | 'OK'
> 674 | CPU DIMM | Voltage | 1.54 | V | 'OK'
> 741 | +5 V | Voltage | 5.15 | V | 'OK'
> 808 | -12 V | Voltage | -12.29 | V | 'OK'
> 875 | VBAT | Voltage | 3.25 | V | 'OK'
> 942 | +3.3VSB | Voltage | 3.30 | V | 'OK'
> 1009 | AVCC | Voltage | 3.31 | V | 'OK'
> 1076 | Chassis Intru | Physical Security | N/A | N/A | 'OK'
> 1143 | PS Status | Power Supply | N/A | N/A |
> 'Unrecognized Event = 0100h' 'Unrecognized Event = 0200h' 'Unrecognized
> Event = 0400h' 'Unrecognized Event = 0800h' 'Unrecognized Event = 1000h'
> 'Unrecognized Event = 2000h' 'Unrecognized Event = 4000h'
>
>
> Kind regards
> Ingard
>
>
>
> 2014-02-15 19:22 GMT+01:00 Al Chu <address@hidden>:
>
> Hi Ingard,
>>
>> I realized another possibility. The sensor could be "shared". So you
>> could try the --shared-sensors option.
>>
>> Al
>>
>> On Fri, 2014-02-14 at 10:26 -0800, Albert Chu wrote:
>> > Hi Ingard,
>> >
>> > Searching through the NEWS file it was released in FreeIPMI 1.0.2.
>> >
>> > Is it possible you're looking at FRU info? (b/c the option is called
>> > -psfruinfo). You can try ipmi-fru with the --bridge-fru option and see
>> > if that works.
>> >
>> > Also try running ipmi-sensors with --bridge-sensors. If that doesn't
>> > work, then this might be an OEM extension from Supermicro. The Slave
>> > Addresses they list (0x70 and 0x72) are not the defaults. If
>> > ipmi-sensors cannot find this sensor in the SDR (sensor data
>> > repository), then Supermicro is getting this through some other means
>> > that isn't standard.
>> >
>> > If you ask Supermicro for the OEM extension information, then it's
>> > possible it could be added into FreeIPMI.
>> >
>> > Al
>> >
>> > It appears in the ipmicfg example below that they are going through the
>> FRU to get information.
>> >
>> > On Fri, 2014-02-14 at 08:14 +0100, ingard Mevåg wrote:
>> > > Hi Al
>> > >
>> > > Thanks for the information. I had already tried to reset the device,
>> but running with --ignore-unrecognized-events did the trick :)
>> > > At least my monitoring is happy now for this one node running latest
>> beta. I was wondering if you knew when this feature got introduced and/or
>> if there are deb packages for the ubuntu LTS releases somewhere? I've got
>> quite a few Lucid and Precise servers running version 0.7.15 and 0.8.12.
>> > >
>> > > Also, is it possible to get information per PSU somehow? Supermicro's
>> ipmicfg gives the following for instance:
>> > >
>> > > address@hidden:~/ipmicfg_1.14.3_20130725/linux/64bit#
>> ./ipmicfg-linux.x86_64 -psfruinfo
>> > > [SlaveAddress = 70h] [Module 1]
>> > > Item | Value
>> > > ---- | -----
>> > > Status | On
>> > > Temperature | 29C/84F
>> > > Fan 1 | 7213 RPM
>> > > Fan 2 | 10076 RPM
>> > >
>> > > [SlaveAddress = 72h] [Module 2]
>> > > Item | Value
>> > > ---- | -----
>> > > Status | On
>> > > Temperature | 28C/82F
>> > > Fan 1 | 7213 RPM
>> > > Fan 2 | 9732 RPM
>> > >
>> > > Regards
>> > > Ingard
>> > >
>> > > On 13 Feb 2014, at 17:12, Al Chu <address@hidden> wrote:
>> > >
>> > > > Hi Ingard,
>> > > >
>> > > > This sounds familiar, although I cannot recall how to fix it
>> through the
>> > > > firmware. It's possible a cold reset of the BMC could to it. You
>> can
>> > > > do a cold reset via
>> > > >
>> > > >> bmc-device --cold-reset
>> > > >
>> > > > If that doesn't work, you can tell ipmimonitoring to ignore
>> unrecognized
>> > > > events via the --ignore-unrecognized-events option. After that
>> > > > everything should work.
>> > > >
>> > > > Al
>> > > >
>> > > > On Thu, 2014-02-13 at 16:17 +0100, Ingard Mevåg wrote:
>> > > >> Hi guys
>> > > >>
>> > > >> I've been upgrading the firmware on the ipmi module on some
>> > > >> supermicro X8SIU recently and I'm now experiencing problems with
>> the PS
>> > > >> Status sensor. Is there anything I can do to make the sensor
>> detect the
>> > > >> PSUs properly?
>> > > >>
>> > > >> Link to board:
>> > > >>
>> http://www.supermicro.com/products/motherboard/Xeon3000/3400/X8SIU.cfm?IPMI=Y
>> > > >> The latest firmware as of now is version 3.12.
>> > > >> Output from ipmimonitoring:
>> > > >> address@hidden:/usr/local# ./sbin/ipmimonitoring -V
>> > > >> ipmi-sensors - 1.4.0.beta0
>> > > >>
>> > > >> address@hidden:/usr/local# ./sbin/ipmimonitoring
>> > > >> ID | Name | Type | State | Reading |
>> Units |
>> > > >> Event
>> > > >> 4 | System Temp | Temperature | Nominal | 32.00 |
>> C |
>> > > >> 'OK'
>> > > >> 71 | CPU Temp | OEM Reserved | N/A | N/A |
>> N/A |
>> > > >> 'OEM Event = 0000h'
>> > > >> 205 | FAN 2 | Fan | Nominal | 1695.00 |
>> RPM |
>> > > >> 'OK'
>> > > >> 272 | FAN 3 | Fan | Nominal | 4655.00 |
>> RPM |
>> > > >> 'OK'
>> > > >> 473 | CPU Vcore | Voltage | Nominal | 0.85 |
>> V |
>> > > >> 'OK'
>> > > >> 540 | +3.3VCC | Voltage | Nominal | 3.31 |
>> V |
>> > > >> 'OK'
>> > > >> 607 | +12 V | Voltage | Nominal | 12.19 |
>> V |
>> > > >> 'OK'
>> > > >> 674 | CPU DIMM | Voltage | Nominal | 1.54 |
>> V |
>> > > >> 'OK'
>> > > >> 741 | +5 V | Voltage | Nominal | 5.15 |
>> V |
>> > > >> 'OK'
>> > > >> 808 | -12 V | Voltage | Nominal | -12.48 |
>> V |
>> > > >> 'OK'
>> > > >> 875 | VBAT | Voltage | Nominal | 3.25 |
>> V |
>> > > >> 'OK'
>> > > >> 942 | +3.3VSB | Voltage | Nominal | 3.30 |
>> V |
>> > > >> 'OK'
>> > > >> 1009 | AVCC | Voltage | Nominal | 3.31 |
>> V |
>> > > >> 'OK'
>> > > >> 1076 | Chassis Intru | Physical Security | Nominal | N/A |
>> N/A |
>> > > >> 'OK'
>> > > >> 1143 | PS Status | Power Supply | N/A | N/A |
>> N/A |
>> > > >> 'Unrecognized Event = 0100h' 'Unrecognized Event = 0200h'
>> 'Unrecognized
>> > > >> Event = 0400h' 'Unrecognized Event = 0800h' 'Unrecognized Event =
>> 1000h'
>> > > >> 'Unrecognized Event = 2000h' 'Unrecognized Event = 4000h'
>> > > >>
>> > > >> Kind Regards
>> > > >> Ingard
>> > > >> _______________________________________________
>> > > >> Freeipmi-users mailing list
>> > > >> address@hidden
>> > > >> https://lists.gnu.org/mailman/listinfo/freeipmi-users
>> > > > --
>> > > > Albert Chu
>> > > > address@hidden
>> > > > Computer Scientist
>> > > > High Performance Systems Division
>> > > > Lawrence Livermore National Laboratory
>> > > >
>> > >
>> --
>> Albert Chu
>> address@hidden
>> Computer Scientist
>> High Performance Systems Division
>> Lawrence Livermore National Laboratory
>>
>>
>
>
> --
> Ingard Mevåg
> Driftssjef
> JottaCloud
>
> Mobil: +47 450 22 834
> E-post: address@hidden
> Webside: www.jottacloud.com
>
--
Ingard Mevåg
Driftssjef
JottaCloud
Mobil: +47 450 22 834
E-post: address@hidden
Webside: www.jottacloud.com