[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Freeipmi-users] I would appreciate any advice on how to troubleshoo
|
From: |
Albert Chu |
|
Subject: |
Re: [Freeipmi-users] I would appreciate any advice on how to troubleshoot this issue.(ipmi_sdr_cache_create: internal IPMI error) |
|
Date: |
Thu, 30 Oct 2014 10:18:03 -0700 |
On Thu, 2014-10-30 at 16:41 +0900, Xrosgen/김순규 wrote:
> Hi, Al
>
>
>
>
>
> Is this problem of freeipmi source? ( Ipmitool sensor normal,
> ipmimonitoring sensor abnormal )
The "get SDR repository information" is required by the vendor and is an
error on their part. They can see IPMI spec chapter 33.7, table 33-2
for proof.
In the mean time, I will see if I can get FreeIPMI to work without it.
Al
>
>
>
>
>
>
>
>
>
>
>
> Artesyn company said
>
>
>
> After detail check the freeipmi source code, when you execute
> ipmimonitoring command, it use get SDR Repository information
> command.
>
> Unfortunately, ATCA-7365/7370 don’t support “get SDR Repository”
> command.
>
> That is why ipmimoitoring return error information when you execute
> ipmimonitoring tool.
>
> The below information is how to get SDR repository through raw
> command.
>
>
>
> address@hidden home]# ipmitool raw 0x0a 0x20
>
> Unable to send RAW command (channel=0x0 netfn=0xa lun=0x0 cmd=0x20
> rsp=0xc1): Invalid command
>
> address@hidden home]# ipmitool fru
>
> FRU Device Description : Builtin FRU Device (ID 0)
>
> Board Mfg Date : Fri Dec 3 18:16:00 2010
>
> Board Mfg : EMERSON
>
> Board Product : PCA,ATCA-7365CE/80W/24GB/R.1.21/6E
>
> Board Serial : E015B62
>
> Board Part Number : 0106865F17D
>
> Product Manufacturer : EMERSON
>
> Product Name : PCA,ATCA-7365CE/80W/24GB/R.1.21/6E
>
> Product Part Number : 0106865F17D
>
> Product Version : R1.21
>
> Product Serial : E015B62
>
>
>
> FRU Device Description : RTM-ATCA-736X-DD (ID 1)
>
> Board Mfg Date : Wed Feb 16 16:25:00 2011
>
> Board Mfg : Emerson
>
> Board Product : RTM-ATCA-736X-DD
>
> Board Serial : 450A1010026
>
> Board Part Number : 0106812K02A
>
> Product Manufacturer : Emerson
>
> Product Name : RTM-ATCA-736X-DD
>
> Product Part Number : 0106812K02A
>
> Product Version : A
>
> Product Serial : 450A1010026
>
> Product Asset Tag : 01
>
>
>
> address@hidden home]#
>
>
>
>
>
>
>
> address@hidden: ~]# ipmitool -V
>
> ipmitool version 1.8.15-rc1
>
> address@hidden: ~]# ipmitool sensor
>
> Hotswap Carrier | 0x0 | discrete | 0x1080| na | na
> | na | na | na | na
>
> Hotswap_AMC | 0x0 | discrete | 0x1080| na | na
> | na | na | na | na
>
> Hotswap_RTM | 0x0 | discrete | 0x1080| na | na
> | na | na | na | na
>
> -48V A Volts | 4.550 | Volts | nr | 39.000 |
> 40.300 | na | na | 72.475 | 73.450
>
> -48V B Volts | 50.700 | Volts | ok | 39.000 |
> 40.300 | na | na | 72.475 | 73.450
>
> -48V Amps | 1.410 | Amps | ok | na | na
> | na | na | na | na
>
> HoldUp Cap Volts | 93.132 | Volts | ok | na | na
> | na | na | na | na
>
> PWR Entry Temp | 36.340 | degrees C | ok | na | na
> | na | 65.740 | 75.540 | na
>
> PWR Entry Status | 0x0 | discrete | 0x0100| na | na
> | na | na | na | na
>
> Bottom Edge Temp | 27.000 | degrees C | ok | na | na
> | na | 44.000 | 57.000 | 66.000
>
> Top Edge Temp | 39.000 | degrees C | ok | na | na
> | na | 66.000 | 76.000 | 85.000
>
> IPMC Temp | 33.000 | degrees C | ok | na | na
> | na | 69.000 | 79.000 | 88.000
>
> CPU Temp | 32.000 | degrees C | ok | na | na
> | na | 70.000 | 85.000 | 95.000
>
> DDR 1 Temp | 30.000 | degrees C | ok | na | na
> | na | 71.000 | 81.000 | 90.000
>
> DDR 2 Temp | 31.000 | degrees C | ok | na | na
> | na | 71.000 | 81.000 | 90.000
>
> DDR 3 Temp | 30.000 | degrees C | ok | na | na
> | na | 71.000 | 81.000 | 90.000
>
> DDR 4 Temp | 30.000 | degrees C | ok | na | na
> | na | 71.000 | 81.000 | 90.000
>
> DDR 5 Temp | 31.000 | degrees C | ok | na | na
> | na | 71.000 | 81.000 | 90.000
>
> DDR 6 Temp | 31.000 | degrees C | ok | na | na
> | na | 71.000 | 81.000 | 90.000
>
> IPMB Physical | 0x88 | discrete | 0x0880| na | na
> | na | na | na | na
>
> BMC Watchdog | 0x0 | discrete | 0x0000| na | na
> | na | na | na | na
>
> IPMC POST | 0x0 | discrete | 0x0100| na | na
> | na | na | na | na
>
> Version Change | 0x0 | discrete | 0x0000| na | na
> | na | na | na | na
>
> Fw Progress | 0x0 | discrete | 0x0480| na |
> na | na | na | na | na
>
> OS Boot | na | discrete | na | na | na
> | na | na | na | na
>
> Boot Error | na | discrete | na | na | na
> | na | na | na | na
>
> Boot Initiated | 0x0 | discrete | 0x0180| na | na
> | na | na | na | na
>
> POST Code | 0x0 | discrete | 0x0000| na | na
> | na | na | na | na
>
> ATCA-7367 IPMC | 0x0 | discrete | 0x1400| na | na
> | na | na | na | na
>
> Power Good | 0x0 | discrete | 0x0100| na | na
> | na | na | na | na
>
> Boot Bank | 0x0 | discrete | 0x0000| na | na
> | na | na | na | na
>
> Reset Source | 0x0 | discrete | 0x0100| na | na
> | na | na | na | na
>
> CPU Status | na | discrete | na | na | na
> | na | na | na | na
>
> +3.3V | 3.319 | Volts | ok | 3.005 | 3.105
> | 3.162 | 3.462 | 3.505 | 3.605
>
> +5V | 5.024 | Volts | ok | 4.509 | 4.656
> | 4.754 | 5.269 | 5.367 | 5.514
>
> +12V | 11.842 | Volts | ok | 10.027 |
> 10.248 | 10.853 | 13.218 | 13.822 | 14.043
>
> Board Temp | 40.330 | degrees C | ok | na | na
> | na | 60.740 | 70.160 | 81.150
>
> Inlet Temp | 36.000 | degrees C | ok | na | na
> | na | 50.000 | 60.000 | 70.000
>
> Version change | na | discrete | na | na | na
> | na | na | na | na
>
> +3.3V RTM | 3.299 | Volts | ok | 2.909 | 3.007
> | na | na | 3.611 | 3.709
>
> +12V RTM | 11.896 | Volts | ok | 10.834 |
> 11.129 | na | na | 12.957 | 13.252
>
> +1.2V RTM | 1.220 | Volts | ok | 0.900 | 1.140
> | na | na | 1.260 | 1.500
>
> +1.0V RTM | 1.000 | Volts | ok | 0.393 | 0.931
> | na | na | 1.079 | 1.618
>
> temp in RTM | 27.000 | degrees C | ok | na | na
> | na | 40.000 | 55.000 | na
>
> temp SAS | 39.000 | degrees C | ok | na | na
> | na | 40.000 | 55.000 | na
>
> temp ETH | 36.000 | degrees C | ok | na | na
> | na | 40.000 | 55.000 | na
>
> address@hidden: ~]# ipmimonitoring -V
>
> ipmi-sensors - 1.4.5
>
> Copyright (C) 2003-2014 FreeIPMI Core Team
>
> This program is free software; you may redistribute it under the terms
> of
>
> the GNU General Public License. This program has absolutely no
> warranty.
>
> address@hidden: ~]# ipmimonitoring
>
> Caching SDR repository
> information: /root/.freeipmi/sdr-cache/sdr-cache-fw.localhost
>
> ipmi_sdr_cache_create: internal IPMI error
>
> address@hidden: ~]#
>
>
>
>
>
>
>
> Best regards,
>
> Sunkyu, Kim
>
>
>
> Team Manager | Customer Support Team 1
>
> T +82-2-3775-8668 | F +82-2-704-3395 | M +82-10-6700-4546
>
> NateON address@hidden | E.Mail address@hidden
>
> Xrosgen lnc. | 810/811 B dong , 583, Yangcheon-ro, Gangseo-gu, Seoul,
> 157-779, Korea
>
>
>
> -----Original Message-----
> From: Albert Chu [mailto:address@hidden
> Sent: Friday, October 3, 2014 2:16 AM
> To: address@hidden
> Cc: address@hidden
> Subject: Re: I would appreciate any advice on how to troubleshoot this
> issue.(ipmi_sdr_cache_create: internal IPMI error)
>
>
>
> Hi
>
>
>
> =====================================================
>
>
>
> Get SDR Repository Info Response
>
>
>
> =====================================================
>
>
>
> [ 20h] = cmd[ 8b]
>
>
>
> [ C1h] = comp_code[ 8b]
>
>
>
> 0xC1 means that there is no IPMI support for the "Get SDR Repository
> Info" command on this motherboard. This is a requirement for all IPMI
> motherboards and is really bad.
>
>
>
> It is very likely a firmware issue w/ the vendor.
>
>
>
> Al
>
>
>
> > Hello
>
> >
>
> >
>
> >
>
> > I live in South Korea Sunkyu.
>
> >
>
> > I can not english well.
>
> >
>
> > I am having problems using ipmimonitoring on a ATCA-7367
> ( Artesyn ).
>
> >
>
> > I consistently get "ipmi_sdr_cache_create: internal IPMI error"
>
> > messages.
>
> >
>
> > I have attached the debug information below.
>
> >
>
> > Artesyn company said : if this issue caused by IPMI firmware,
> Artesyn
>
> > will fix it.
>
> >
>
> > I would appreciate any advice on how to troubleshoot this issue.
>
> >
>
> >
>
> >
>
> > Have a nice day!
>
> >
>
> > Best regards
>
> >
>
> >
>
> >
>
> >
>
> >
>
> > address@hidden: ~]# uname -a
>
> >
>
> > Linux localhost2.6.32-431.29.2.el6.x86_64 #1 SMP Tue Sep 9 21:36:05
>
> > UTC 2014 x86_64 x86_64 x86_64 GNU/Linux
>
> >
>
> > address@hidden: ~]# cat /etc/redhat-release
>
> >
>
> > CentOS release 6.5 (Final)
>
> >
>
> > address@hidden: ~]# ipmimonitoring -V
>
> >
>
> > ipmi-sensors - 1.4.5
>
> >
>
> > Copyright (C) 2003-2014 FreeIPMI Core Team
>
> >
>
> > This program is free software; you may redistribute it under the
> terms
>
> > of
>
> >
>
> > the GNU General Public License. This program has absolutely no
>
> > warranty.
>
> >
>
> > address@hidden: ~]# ipmimonitoring --debug
>
> >
>
> > Caching SDR repository
>
> > information: /root/.freeipmi/sdr-cache/sdr-cache-fw.localhost
>
> >
>
> > =====================================================
>
> >
>
> > Get SDR Repository Info Request
>
> >
>
> > =====================================================
>
> >
>
> > [ 20h] = cmd[ 8b]
>
> >
>
> > =====================================================
>
> >
>
> > Get SDR Repository Info Response
>
> >
>
> > =====================================================
>
> >
>
> > [ 20h] = cmd[ 8b]
>
> >
>
> > [ C1h] = comp_code[ 8b]
>
> >
>
> > ipmi_sdr_cache_create: internal IPMI error
>
> >
>
> > address@hidden: ~]# ipmimonitoring -D KCS
>
> >
>
> > Caching SDR repository
>
> > information: /root/.freeipmi/sdr-cache/sdr-cache-fw.localhost
>
> >
>
> > ipmi_sdr_cache_create: internal IPMI error
>
> >
>
> > address@hidden: ~]# bmc-info --debug
>
> >
>
> > =====================================================
>
> >
>
> > Get Device ID Request
>
> >
>
> > =====================================================
>
> >
>
> > [ 1h] = cmd[ 8b]
>
> >
>
> > =====================================================
>
> >
>
> > Get Device ID Response
>
> >
>
> > =====================================================
>
> >
>
> > [ 1h] = cmd[ 8b]
>
> >
>
> > [ 0h] = comp_code[ 8b]
>
> >
>
> > [ 0h] = device_id[ 8b]
>
> >
>
> > [ 0h] = device_revision.revision[ 4b]
>
> >
>
> > [ 0h] = device_revision.reserved1[ 3b]
>
> >
>
> > [ 1h] = device_revision.sdr_support[ 1b]
>
> >
>
> > [ 2h] = firmware_revision1.major_revision[ 7b]
>
> >
>
> > [ 0h] = firmware_revision1.device_available[ 1b]
>
> >
>
> > [ 0h] = firmware_revision2.minor_revision[ 8b]
>
> >
>
> > [ 1h] = ipmi_version_major[ 4b]
>
> >
>
> > [ 5h] = ipmi_version_minor[ 4b]
>
> >
>
> > [ 1h] = additional_device_support.sensor_device[ 1b]
>
> >
>
> > [ 0h] =
>
> > additional_device_support.sdr_repository_device[ 1b]
>
> >
>
> > [ 1h] = additional_device_support.sel_device[ 1b]
>
> >
>
> > [ 1h] =
>
> > additional_device_support.fru_inventory_device[ 1b]
>
> >
>
> > [ 0h] =
>
> > additional_device_support.ipmb_event_receiver[ 1b]
>
> >
>
> > [ 1h] =
>
> > additional_device_support.ipmb_event_generator[ 1b]
>
> >
>
> > [ 0h] = additional_device_support.bridge[ 1b]
>
> >
>
> > [ 0h] = additional_device_support.chassis_device[ 1b]
>
> >
>
> > [ 65CDh] = manufacturer_id.id[20b]
>
> >
>
> > [ 0h] = manufacturer_id.reserved1[ 4b]
>
> >
>
> > [ 26h] = product_id[16b]
>
> >
>
> > [ 23000000h] = auxiliary_firmware_revision_information[32b]
>
> >
>
> > Device ID : 0
>
> >
>
> > Device Revision : 0
>
> >
>
> > Device SDRs : supported
>
> >
>
> > Firmware Revision : 2.00
>
> >
>
> > Device Available : yes (normal operation)
>
> >
>
> > IPMI Version : 1.5
>
> >
>
> > Sensor Device : supported
>
> >
>
> > SDR Repository Device : unsupported
>
> >
>
> > SEL Device : supported
>
> >
>
> > FRU Inventory Device : supported
>
> >
>
> > IPMB Event Receiver : unsupported
>
> >
>
> > IPMB Event Generator : supported
>
> >
>
> > Bridge : unsupported
>
> >
>
> > Chassis Device : unsupported
>
> >
>
> > Manufacturer ID : Emerson Network Power, Embedded Computing
>
> > (26061)
>
> >
>
> > Product ID : 38
>
> >
>
> > Auxiliary Firmware Revision Information : 23000000h
>
> >
>
> >
>
> >
>
> > =====================================================
>
> >
>
> > Get Device GUID Request
>
> >
>
> > =====================================================
>
> >
>
> > [ 8h] = cmd[ 8b]
>
> >
>
> > =====================================================
>
> >
>
> > Get Device GUID Response
>
> >
>
> > =====================================================
>
> >
>
> > [ 8h] = cmd[ 8b]
>
> >
>
> > [ 0h] = comp_code[ 8b]
>
> >
>
> > [ BYTE ARRAY ... ] = guid[16B]
>
> >
>
> > [ 4Bh FCh 2Eh AFh 01h 00h 01h 00h ]
>
> >
>
> > [ DFh 11h B4h 5Fh 00h 40h 0Bh CEh ]
>
> >
>
> > Device GUID : ce0b4000-5fb4-11df-0001-0001af2efc4b
>
> >
>
> >
>
> >
>
> > =====================================================
>
> >
>
> > Get System GUID Request
>
> >
>
> > =====================================================
>
> >
>
> > [ 37h] = cmd[ 8b]
>
> >
>
> > =====================================================
>
> >
>
> > Get System GUID Response
>
> >
>
> > =====================================================
>
> >
>
> > [ 37h] = cmd[ 8b]
>
> >
>
> > [ 0h] = comp_code[ 8b]
>
> >
>
> > [ BYTE ARRAY ... ] = guid[16B]
>
> >
>
> > [ 00h 00h 00h 00h 00h 00h 00h 00h ]
>
> >
>
> > [ 00h 00h 00h 00h 00h 00h 00h 00h ]
>
> >
>
> > System GUID : 00000000-0000-0000-0000-000000000000
>
> >
>
> >
>
> >
>
> > =====================================================
>
> >
>
> > Get System Info Parameters Request
>
> >
>
> > =====================================================
>
> >
>
> > [ 59h] = cmd[ 8b]
>
> >
>
> > [ 0h] = reserved[ 7b]
>
> >
>
> > [ 0h] = get_parameter[ 1b]
>
> >
>
> > [ 1h] = parameter_selector[ 8b]
>
> >
>
> > [ 0h] = set_selector[ 8b]
>
> >
>
> > [ 0h] = block_selector[ 8b]
>
> >
>
> > =====================================================
>
> >
>
> > Get System Info Parameters Response
>
> >
>
> > =====================================================
>
> >
>
> > [ 59h] = cmd[ 8b]
>
> >
>
> > [ C1h] = comp_code[ 8b]
>
> >
>
> > =====================================================
>
> >
>
> > Get Channel Info Command Request
>
> >
>
> > =====================================================
>
> >
>
> > [ 42h] = cmd[ 8b]
>
> >
>
> > [ 0h] = channel_number[ 4b]
>
> >
>
> > [ 0h] = reserved[ 4b]
>
> >
>
> > =====================================================
>
> >
>
> > Get Channel Info Command Response
>
> >
>
> > =====================================================
>
> >
>
> > [ 42h] = cmd[ 8b]
>
> >
>
> > [ 0h] = comp_code[ 8b]
>
> >
>
> > [ 0h] = actual_channel_number[ 4b]
>
> >
>
> > [ 0h] = actual_channel_number.reserved[ 4b]
>
> >
>
> > [ 1h] = channel_medium_type[ 7b]
>
> >
>
> > [ 0h] = channel_medium_type.reserved[ 1b]
>
> >
>
> > [ 1h] = channel_protocol_type[ 5b]
>
> >
>
> > [ 0h] = channel_protocol_type.reserved[ 3b]
>
> >
>
> > [ 0h] = active_session_count[ 6b]
>
> >
>
> > [ 0h] = session_support[ 2b]
>
> >
>
> > [ 1BF2h] = vendor_id[24b]
>
> >
>
> > [ 0h] = auxiliary_channel_info[16b]
>
> >
>
> > =====================================================
>
> >
>
> > Get Channel Info Command Request
>
> >
>
> > =====================================================
>
> >
>
> > [ 42h] = cmd[ 8b]
>
> >
>
> > [ 1h] = channel_number[ 4b]
>
> >
>
> > [ 0h] = reserved[ 4b]
>
> >
>
> > =====================================================
>
> >
>
> > Get Channel Info Command Response
>
> >
>
> > =====================================================
>
> >
>
> > [ 42h] = cmd[ 8b]
>
> >
>
> > [ 0h] = comp_code[ 8b]
>
> >
>
> > [ 1h] = actual_channel_number[ 4b]
>
> >
>
> > [ 0h] = actual_channel_number.reserved[ 4b]
>
> >
>
> > [ 5h] = channel_medium_type[ 7b]
>
> >
>
> > [ 0h] = channel_medium_type.reserved[ 1b]
>
> >
>
> > [ 9h] = channel_protocol_type[ 5b]
>
> >
>
> > [ 0h] = channel_protocol_type.reserved[ 3b]
>
> >
>
> > [ 0h] = active_session_count[ 6b]
>
> >
>
> > [ 0h] = session_support[ 2b]
>
> >
>
> > [ 400Ah] = vendor_id[24b]
>
> >
>
> > [ 0h] = auxiliary_channel_info[16b]
>
> >
>
> > =====================================================
>
> >
>
> > Get Channel Info Command Request
>
> >
>
> > =====================================================
>
> >
>
> > [ 42h] = cmd[ 8b]
>
> >
>
> > [ 2h] = channel_number[ 4b]
>
> >
>
> > [ 0h] = reserved[ 4b]
>
> >
>
> > =====================================================
>
> >
>
> > Get Channel Info Command Response
>
> >
>
> > =====================================================
>
> >
>
> > [ 42h] = cmd[ 8b]
>
> >
>
> > [ CBh] = comp_code[ 8b]
>
> >
>
> > [ 1h] = actual_channel_number[ 4b]
>
> >
>
> > [ 0h] = actual_channel_number.reserved[ 4b]
>
> >
>
> > [ 5h] = channel_medium_type[ 7b]
>
> >
>
> > [ 0h] = channel_medium_type.reserved[ 1b]
>
> >
>
> > [ 9h] = channel_protocol_type[ 5b]
>
> >
>
> > [ 0h] = channel_protocol_type.reserved[ 3b]
>
> >
>
> > [ 0h] = active_session_count[ 6b]
>
> >
>
> > [ 0h] = session_support[ 2b]
>
> >
>
> > [ 400Ah] = vendor_id[24b]
>
> >
>
> > [ 0h] = auxiliary_channel_info[16b]
>
> >
>
> > =====================================================
>
> >
>
> > Get Channel Info Command Request
>
> >
>
> > =====================================================
>
> >
>
> > [ 42h] = cmd[ 8b]
>
> >
>
> > [ 3h] = channel_number[ 4b]
>
> >
>
> > [ 0h] = reserved[ 4b]
>
> >
>
> > =====================================================
>
> >
>
> > Get Channel Info Command Response
>
> >
>
> > =====================================================
>
> >
>
> > [ 42h] = cmd[ 8b]
>
> >
>
> > [ CBh] = comp_code[ 8b]
>
> >
>
> > [ 1h] = actual_channel_number[ 4b]
>
> >
>
> > [ 0h] = actual_channel_number.reserved[ 4b]
>
> >
>
> > [ 5h] = channel_medium_type[ 7b]
>
> >
>
> > [ 0h] = channel_medium_type.reserved[ 1b]
>
> >
>
> > [ 9h] = channel_protocol_type[ 5b]
>
> >
>
> > [ 0h] = channel_protocol_type.reserved[ 3b]
>
> >
>
> > [ 0h] = active_session_count[ 6b]
>
> >
>
> > [ 0h] = session_support[ 2b]
>
> >
>
> > [ 400Ah] = vendor_id[24b]
>
> >
>
> > [ 0h] = auxiliary_channel_info[16b]
>
> >
>
> > =====================================================
>
> >
>
> > Get Channel Info Command Request
>
> >
>
> > =====================================================
>
> >
>
> > [ 42h] = cmd[ 8b]
>
> >
>
> > [ 4h] = channel_number[ 4b]
>
> >
>
> > [ 0h] = reserved[ 4b]
>
> >
>
> > =====================================================
>
> >
>
> > Get Channel Info Command Response
>
> >
>
> > =====================================================
>
> >
>
> > [ 42h] = cmd[ 8b]
>
> >
>
> > [ 0h] = comp_code[ 8b]
>
> >
>
> > [ 4h] = actual_channel_number[ 4b]
>
> >
>
> > [ 0h] = actual_channel_number.reserved[ 4b]
>
> >
>
> > [ Ch] = channel_medium_type[ 7b]
>
> >
>
> > [ 0h] = channel_medium_type.reserved[ 1b]
>
> >
>
> > [ 5h] = channel_protocol_type[ 5b]
>
> >
>
> > [ 0h] = channel_protocol_type.reserved[ 3b]
>
> >
>
> > [ 0h] = active_session_count[ 6b]
>
> >
>
> > [ 0h] = session_support[ 2b]
>
> >
>
> > [ 1BF2h] = vendor_id[24b]
>
> >
>
> > [ 0h] = auxiliary_channel_info[16b]
>
> >
>
> > =====================================================
>
> >
>
> > Get Channel Info Command Request
>
> >
>
> > =====================================================
>
> >
>
> > [ 42h] = cmd[ 8b]
>
> >
>
> > [ 5h] = channel_number[ 4b]
>
> >
>
> > [ 0h] = reserved[ 4b]
>
> >
>
> > =====================================================
>
> >
>
> > Get Channel Info Command Response
>
> >
>
> > =====================================================
>
> >
>
> > [ 42h] = cmd[ 8b]
>
> >
>
> > [ 0h] = comp_code[ 8b]
>
> >
>
> > [ 5h] = actual_channel_number[ 4b]
>
> >
>
> > [ 0h] = actual_channel_number.reserved[ 4b]
>
> >
>
> > [ 4h] = channel_medium_type[ 7b]
>
> >
>
> > [ 0h] = channel_medium_type.reserved[ 1b]
>
> >
>
> > [ 1h] = channel_protocol_type[ 5b]
>
> >
>
> > [ 0h] = channel_protocol_type.reserved[ 3b]
>
> >
>
> > [ 0h] = active_session_count[ 6b]
>
> >
>
> > [ 2h] = session_support[ 2b]
>
> >
>
> > [ 1BF2h] = vendor_id[24b]
>
> >
>
> > [ 0h] = auxiliary_channel_info[16b]
>
> >
>
> > =====================================================
>
> >
>
> > Get Channel Info Command Request
>
> >
>
> > =====================================================
>
> >
>
> > [ 42h] = cmd[ 8b]
>
> >
>
> > [ 6h] = channel_number[ 4b]
>
> >
>
> > [ 0h] = reserved[ 4b]
>
> >
>
> > =====================================================
>
> >
>
> > Get Channel Info Command Response
>
> >
>
> > =====================================================
>
> >
>
> > [ 42h] = cmd[ 8b]
>
> >
>
> > [ 0h] = comp_code[ 8b]
>
> >
>
> > [ 6h] = actual_channel_number[ 4b]
>
> >
>
> > [ 0h] = actual_channel_number.reserved[ 4b]
>
> >
>
> > [ 4h] = channel_medium_type[ 7b]
>
> >
>
> > [ 0h] = channel_medium_type.reserved[ 1b]
>
> >
>
> > [ 1h] = channel_protocol_type[ 5b]
>
> >
>
> > [ 0h] = channel_protocol_type.reserved[ 3b]
>
> >
>
> > [ 0h] = active_session_count[ 6b]
>
> >
>
> > [ 2h] = session_support[ 2b]
>
> >
>
> > [ 1BF2h] = vendor_id[24b]
>
> >
>
> > [ 0h] = auxiliary_channel_info[16b]
>
> >
>
> > =====================================================
>
> >
>
> > Get Channel Info Command Request
>
> >
>
> > =====================================================
>
> >
>
> > [ 42h] = cmd[ 8b]
>
> >
>
> > [ 7h] = channel_number[ 4b]
>
> >
>
> > [ 0h] = reserved[ 4b]
>
> >
>
> > =====================================================
>
> >
>
> > Get Channel Info Command Response
>
> >
>
> > =====================================================
>
> >
>
> > [ 42h] = cmd[ 8b]
>
> >
>
> > [ 0h] = comp_code[ 8b]
>
> >
>
> > [ 7h] = actual_channel_number[ 4b]
>
> >
>
> > [ 0h] = actual_channel_number.reserved[ 4b]
>
> >
>
> > [ 1h] = channel_medium_type[ 7b]
>
> >
>
> > [ 0h] = channel_medium_type.reserved[ 1b]
>
> >
>
> > [ 1h] = channel_protocol_type[ 5b]
>
> >
>
> > [ 0h] = channel_protocol_type.reserved[ 3b]
>
> >
>
> > [ 0h] = active_session_count[ 6b]
>
> >
>
> > [ 0h] = session_support[ 2b]
>
> >
>
> > [ 1BF2h] = vendor_id[24b]
>
> >
>
> > [ 0h] = auxiliary_channel_info[16b]
>
> >
>
> > Channel Information
>
> >
>
> >
>
> >
>
> > Channel Number : 0
>
> >
>
> > Medium Type : IPMB (I2C)
>
> >
>
> > Protocol Type : IPMB-1.0
>
> >
>
> > Active Session Count : 0
>
> >
>
> > Session Support : session-less
>
> >
>
> > Vendor ID : Intelligent Platform Management Interface
> forum
>
> > (7154)
>
> >
>
> >
>
> >
>
> > Channel Number : 1
>
> >
>
> > Medium Type : Asynch. Serial/Modem (RS-232)
>
> >
>
> > Protocol Type : TMODE
>
> >
>
> > Active Session Count : 0
>
> >
>
> > Session Support : session-less
>
> >
>
> > Vendor ID : Pigeon Point Systems (16394)
>
> >
>
> >
>
> >
>
> > Channel Number : 4
>
> >
>
> > Medium Type : System Interface (KCS, SMIC, or BT)
>
> >
>
> > Protocol Type : KCS
>
> >
>
> > Active Session Count : 0
>
> >
>
> > Session Support : session-less
>
> >
>
> > Vendor ID : Intelligent Platform Management Interface
> forum
>
> > (7154)
>
> >
>
> >
>
> >
>
> > Channel Number : 5
>
> >
>
> > Medium Type : 802.3 LAN
>
> >
>
> > Protocol Type : IPMB-1.0
>
> >
>
> > Active Session Count : 0
>
> >
>
> > Session Support : multi-session
>
> >
>
> > Vendor ID : Intelligent Platform Management Interface
> forum
>
> > (7154)
>
> >
>
> >
>
> >
>
> > Channel Number : 6
>
> >
>
> > Medium Type : 802.3 LAN
>
> >
>
> > Protocol Type : IPMB-1.0
>
> >
>
> > Active Session Count : 0
>
> >
>
> > Session Support : multi-session
>
> >
>
> > Vendor ID : Intelligent Platform Management Interface
> forum
>
> > (7154)
>
> >
>
> >
>
> >
>
> > Channel Number : 7
>
> >
>
> > Medium Type : IPMB (I2C)
>
> >
>
> > Protocol Type : IPMB-1.0
>
> >
>
> > Active Session Count : 0
>
> >
>
> > Session Support : session-less
>
> >
>
> > Vendor ID : Intelligent Platform Management Interface
> forum
>
> > (7154)
>
> >
>
> >
>
> >
>
> > address@hidden: ~]# ipmi-sensors --debug
>
> >
>
> > Caching SDR repository
>
> > information: /root/.freeipmi/sdr-cache/sdr-cache-fw.localhost
>
> >
>
> > =====================================================
>
> >
>
> > Get SDR Repository Info Request
>
> >
>
> > =====================================================
>
> >
>
> > [ 20h] = cmd[ 8b]
>
> >
>
> > =====================================================
>
> >
>
> > Get SDR Repository Info Response
>
> >
>
> > =====================================================
>
> >
>
> > [ 20h] = cmd[ 8b]
>
> >
>
> > [ C1h] = comp_code[ 8b]
>
> >
>
> > ipmi_sdr_cache_create: internal IPMI error
>
> >
>
> > address@hidden: ~]#
>
> >
>
> > address@hidden: ~]# ipmi-sensors --debug --sdr-cache-recreate
>
> >
>
> > Caching SDR repository
>
> > information: /root/.freeipmi/sdr-cache/sdr-cache-fw.localhost
>
> >
>
> > =====================================================
>
> >
>
> > Get SDR Repository Info Request
>
> >
>
> > =====================================================
>
> >
>
> > [ 20h] = cmd[ 8b]
>
> >
>
> > =====================================================
>
> >
>
> > Get SDR Repository Info Response
>
> >
>
> > =====================================================
>
> >
>
> > [ 20h] = cmd[ 8b]
>
> >
>
> > [ C1h] = comp_code[ 8b]
>
> >
>
> > ipmi_sdr_cache_create: internal IPMI error
>
> >
>
> >
>
> >
>
> >
>
> >
>
> > address@hidden: ~]# dmidecode
>
> >
>
> > # dmidecode 2.12
>
> >
>
> > SMBIOS 2.6 present.
>
> >
>
> > 27 structures occupying 1582 bytes.
>
> >
>
> > Table at 0x000E9140.
>
> >
>
> >
>
> >
>
> > Handle 0x0000, DMI type 0, 24 bytes
>
> >
>
> > BIOS Information
>
> >
>
> > Vendor: Emerson
>
> >
>
> > Version: 1.1.3
>
> >
>
> > Release Date: 10/02/2013
>
> >
>
> > Address: 0xF0000
>
> >
>
> > Runtime Size: 64 kB
>
> >
>
> > ROM Size: 1024 kB
>
> >
>
> > Characteristics:
>
> >
>
> > PCI is supported
>
> >
>
> > PNP is supported
>
> >
>
> > BIOS is upgradeable
>
> >
>
> > BIOS shadowing is allowed
>
> >
>
> > Boot from CD is supported
>
> >
>
> > Selectable boot is supported
>
> >
>
> > BIOS ROM is socketed
>
> >
>
> > EDD is supported
>
> >
>
> > 5.25"/1.2 MB floppy services are supported (int 13h)
>
> >
>
> > 3.5"/720 kB floppy services are supported (int 13h)
>
> >
>
> > 3.5"/2.88 MB floppy services are supported (int 13h)
>
> >
>
> > Print screen service is supported (int 5h)
>
> >
>
> > 8042 keyboard services are supported (int 9h)
>
> >
>
> > Serial services are supported (int 14h)
>
> >
>
> > Printer services are supported (int 17h)
>
> >
>
> > ACPI is supported
>
> >
>
> > USB legacy is supported
>
> >
>
> > BIOS boot specification is supported
>
> >
>
> > Targeted content distribution is supported
>
> >
>
> > BIOS Revision: 4.6
>
> >
>
> >
>
> >
>
> > Handle 0x0001, DMI type 1, 27 bytes
>
> >
>
> > System Information
>
> >
>
> > Manufacturer: EMERSON
>
> >
>
> > Product Name: PCA,ATCA-7367/0GB/6E
>
> >
>
> > Version: REV.B
>
> >
>
> > Serial Number: 8571373
>
> >
>
> > UUID: 5FB411DF-4000-CE0B-4BFC-2EAF01000100
>
> >
>
> > Wake-up Type: Power Switch
>
> >
>
> > SKU Number:
>
> >
>
> > Family:
>
> >
>
> >
>
> >
>
> > Handle 0x0002, DMI type 2, 15 bytes
>
> >
>
> > Base Board Information
>
> >
>
> > Manufacturer: Emerson
>
> >
>
> > Product Name: PCA,ATCA-7367/0GB/6E
>
> >
>
> > Version: 0106826H04B
>
> >
>
> > Serial Number: 8571373
>
> >
>
> > Asset Tag:
>
> >
>
> > Features:
>
> >
>
> > Board is a hosting board
>
> >
>
> > Board is removable
>
> >
>
> > Board is replaceable
>
> >
>
> > Board is hot swappable
>
> >
>
> > Location In Chassis:
>
> >
>
> > Chassis Handle: 0x0003
>
> >
>
> > Type: Server Blade
>
> >
>
> > Contained Object Handles: 0
>
> >
>
> >
>
> >
>
> > Handle 0x0003, DMI type 4, 42 bytes
>
> >
>
> > Processor Information
>
> >
>
> > Socket Designation: CPU 1
>
> >
>
> > Type: Central Processor
>
> >
>
> > Family: Xeon
>
> >
>
> > Manufacturer: Intel
>
> >
>
> > ID: C2 06 02 00 FF FB EB BF
>
> >
>
> > Signature: Type 0, Family 6, Model 44, Stepping 2
>
> >
>
> > Flags:
>
> >
>
> > FPU (Floating-point unit on-chip)
>
> >
>
> > VME (Virtual mode extension)
>
> >
>
> > DE (Debugging extension)
>
> >
>
> > PSE (Page size extension)
>
> >
>
> > TSC (Time stamp counter)
>
> >
>
> > MSR (Model specific registers)
>
> >
>
> > PAE (Physical address extension)
>
> >
>
> > MCE (Machine check exception)
>
> >
>
> > CX8 (CMPXCHG8 instruction supported)
>
> >
>
> > APIC (On-chip APIC hardware supported)
>
> >
>
> > SEP (Fast system call)
>
> >
>
> > MTRR (Memory type range registers)
>
> >
>
> > PGE (Page global enable)
>
> >
>
> > MCA (Machine check architecture)
>
> >
>
> > CMOV (Conditional move instruction supported)
>
> >
>
> > PAT (Page attribute table)
>
> >
>
> > PSE-36 (36-bit page size extension)
>
> >
>
> > CLFSH (CLFLUSH instruction supported)
>
> >
>
> > DS (Debug store)
>
> >
>
> > ACPI (ACPI supported)
>
> >
>
> > MMX (MMX technology supported)
>
> >
>
> > FXSR (FXSAVE and FXSTOR instructions supported)
>
> >
>
> > SSE (Streaming SIMD extensions)
>
> >
>
> > SSE2 (Streaming SIMD extensions 2)
>
> >
>
> > SS (Self-snoop)
>
> >
>
> > HTT (Multi-threading)
>
> >
>
> > TM (Thermal monitor supported)
>
> >
>
> > PBE (Pending break enabled)
>
> >
>
> > Version: Intel(R) Xeon(R) CPU L5638 @ 2.00GHz
>
> >
>
> > Voltage: 0.0 V
>
> >
>
> > External Clock: 533 MHz
>
> >
>
> > Max Speed: 4000 MHz
>
> >
>
> > Current Speed: 1995 MHz
>
> >
>
> > Status: Populated, Enabled
>
> >
>
> > Upgrade: Socket LGA1366
>
> >
>
> > L1 Cache Handle: 0x0004
>
> >
>
> > L2 Cache Handle: 0x0005
>
> >
>
> > L3 Cache Handle: 0x0006
>
> >
>
> > Serial Number:
>
> >
>
> > Asset Tag:
>
> >
>
> > Part Number:
>
> >
>
> > Core Count: 6
>
> >
>
> > Core Enabled: 6
>
> >
>
> > Thread Count: 12
>
> >
>
> > Characteristics:
>
> >
>
> > 64-bit capable
>
> >
>
> >
>
> >
>
> > Handle 0x0004, DMI type 7, 19 bytes
>
> >
>
> > Cache Information
>
> >
>
> > Socket Designation: L1-Cache
>
> >
>
> > Configuration: Enabled, Not Socketed, Level 1
>
> >
>
> > Operational Mode: Write Back
>
> >
>
> > Location: Internal
>
> >
>
> > Installed Size: 32 kB
>
> >
>
> > Maximum Size: 32 kB
>
> >
>
> > Supported SRAM Types:
>
> >
>
> > Other
>
> >
>
> > Installed SRAM Type: Other
>
> >
>
> > Speed: Unknown
>
> >
>
> > Error Correction Type: None
>
> >
>
> > System Type: Unified
>
> >
>
> > Associativity: 4-way Set-associative
>
> >
>
> >
>
> >
>
> > Handle 0x0005, DMI type 7, 19 bytes
>
> >
>
> > Cache Information
>
> >
>
> > Socket Designation: L2-Cache
>
> >
>
> > Configuration: Enabled, Not Socketed, Level 2
>
> >
>
> > Operational Mode: Varies With Memory Address
>
> >
>
> > Location: Internal
>
> >
>
> > Installed Size: 256 kB
>
> >
>
> > Maximum Size: 256 kB
>
> >
>
> > Supported SRAM Types:
>
> >
>
> > Other
>
> >
>
> > Installed SRAM Type: Other
>
> >
>
> > Speed: Unknown
>
> >
>
> > Error Correction Type: None
>
> >
>
> > System Type: Unified
>
> >
>
> > Associativity: 8-way Set-associative
>
> >
>
> >
>
> >
>
> > Handle 0x0006, DMI type 7, 19 bytes
>
> >
>
> > Cache Information
>
> >
>
> > Socket Designation: L3-Cache
>
> >
>
> > Configuration: Disabled, Not Socketed, Level 3
>
> >
>
> > Operational Mode: Unknown
>
> >
>
> > Location: Internal
>
> >
>
> > Installed Size: 12288 kB
>
> >
>
> > Maximum Size: 12288 kB
>
> >
>
> > Supported SRAM Types:
>
> >
>
> > Other
>
> >
>
> > Installed SRAM Type: Other
>
> >
>
> > Speed: Unknown
>
> >
>
> > Error Correction Type: None
>
> >
>
> > System Type: Unified
>
> >
>
> > Associativity: 16-way Set-associative
>
> >
>
> >
>
> >
>
> > Handle 0x0008, DMI type 12, 5 bytes
>
> >
>
> > System Configuration Options
>
> >
>
> > Option 1: To Be Filled By O.E.M.
>
> >
>
> >
>
> >
>
> > Handle 0x0009, DMI type 13, 22 bytes
>
> >
>
> > BIOS Language Information
>
> >
>
> > Language Description Format: Long
>
> >
>
> > Installable Languages: 1
>
> >
>
> > en|US|iso8859-1
>
> >
>
> > Currently Installed Language: en|US|iso8859-1
>
> >
>
> >
>
> >
>
> > Handle 0x000A, DMI type 16, 15 bytes
>
> >
>
> > Physical Memory Array
>
> >
>
> > Location: System Board Or Motherboard
>
> >
>
> > Use: System Memory
>
> >
>
> > Error Correction Type: Single-bit ECC
>
> >
>
> > Maximum Capacity: 96 GB
>
> >
>
> > Error Information Handle: Not Provided
>
> >
>
> > Number Of Devices: 6
>
> >
>
> >
>
> >
>
> > Handle 0x000B, DMI type 19, 15 bytes
>
> >
>
> > Memory Array Mapped Address
>
> >
>
> > Starting Address: 0x00000000000
>
> >
>
> > Ending Address: 0x005FFFFFFFF
>
> >
>
> > Range Size: 24 GB
>
> >
>
> > Physical Array Handle: 0x000A
>
> >
>
> > Partition Width: 18
>
> >
>
> >
>
> >
>
> > Handle 0x000C, DMI type 17, 28 bytes
>
> >
>
> > Memory Device
>
> >
>
> > Array Handle: 0x000A
>
> >
>
> > Error Information Handle: Not Provided
>
> >
>
> > Total Width: 72 bits
>
> >
>
> > Data Width: 64 bits
>
> >
>
> > Size: 4096 MB
>
> >
>
> > Form Factor: DIMM
>
> >
>
> > Set: 1
>
> >
>
> > Locator: DIMM_Socket_P01
>
> >
>
> > Bank Locator: DIMM_CPU#0
>
> >
>
> > Type: DDR3
>
> >
>
> > Type Detail: Synchronous
>
> >
>
> > Speed: 1333 MHz
>
> >
>
> > Manufacturer: Samsung
>
> >
>
> > Serial Number: 34FA4761
>
> >
>
> > Asset Tag:
>
> >
>
> > Part Number: M392B5273DH0-CH9
>
> >
>
> > Rank: 2
>
> >
>
> >
>
> >
>
> > Handle 0x000D, DMI type 20, 19 bytes
>
> >
>
> > Memory Device Mapped Address
>
> >
>
> > Starting Address: 0x00000000000
>
> >
>
> > Ending Address: 0x000FFFFFFFF
>
> >
>
> > Range Size: 4 GB
>
> >
>
> > Physical Device Handle: 0x000C
>
> >
>
> > Memory Array Mapped Address Handle: 0x000B
>
> >
>
> > Partition Row Position: Unknown
>
> >
>
> >
>
> >
>
> > Handle 0x000E, DMI type 17, 28 bytes
>
> >
>
> > Memory Device
>
> >
>
> > Array Handle: 0x000A
>
> >
>
> > Error Information Handle: Not Provided
>
> >
>
> > Total Width: 72 bits
>
> >
>
> > Data Width: 64 bits
>
> >
>
> > Size: 4096 MB
>
> >
>
> > Form Factor: DIMM
>
> >
>
> > Set: 2
>
> >
>
> > Locator: DIMM_Socket_P02
>
> >
>
> > Bank Locator: DIMM_CPU#0
>
> >
>
> > Type: DDR3
>
> >
>
> > Type Detail: Synchronous
>
> >
>
> > Speed: 1333 MHz
>
> >
>
> > Manufacturer: Samsung
>
> >
>
> > Serial Number: 34FA465E
>
> >
>
> > Asset Tag:
>
> >
>
> > Part Number: M392B5273DH0-CH9
>
> >
>
> > Rank: 2
>
> >
>
> >
>
> >
>
> > Handle 0x000F, DMI type 20, 19 bytes
>
> >
>
> > Memory Device Mapped Address
>
> >
>
> > Starting Address: 0x00100000000
>
> >
>
> > Ending Address: 0x001FFFFFFFF
>
> >
>
> > Range Size: 4 GB
>
> >
>
> > Physical Device Handle: 0x000E
>
> >
>
> > Memory Array Mapped Address Handle: 0x000B
>
> >
>
> > Partition Row Position: Unknown
>
> >
>
> >
>
> >
>
> > Handle 0x0010, DMI type 17, 28 bytes
>
> >
>
> > Memory Device
>
> >
>
> > Array Handle: 0x000A
>
> >
>
> > Error Information Handle: Not Provided
>
> >
>
> > Total Width: 72 bits
>
> >
>
> > Data Width: 64 bits
>
> >
>
> > Size: 4096 MB
>
> >
>
> > Form Factor: DIMM
>
> >
>
> > Set: 4
>
> >
>
> > Locator: DIMM_Socket_P03
>
> >
>
> > Bank Locator: DIMM_CPU#0
>
> >
>
> > Type: DDR3
>
> >
>
> > Type Detail: Synchronous
>
> >
>
> > Speed: 1333 MHz
>
> >
>
> > Manufacturer: Samsung
>
> >
>
> > Serial Number: 34FA4665
>
> >
>
> > Asset Tag:
>
> >
>
> > Part Number: M392B5273DH0-CH9
>
> >
>
> > Rank: 2
>
> >
>
> >
>
> >
>
> > Handle 0x0011, DMI type 20, 19 bytes
>
> >
>
> > Memory Device Mapped Address
>
> >
>
> > Starting Address: 0x00200000000
>
> >
>
> > Ending Address: 0x002FFFFFFFF
>
> >
>
> > Range Size: 4 GB
>
> >
>
> > Physical Device Handle: 0x0010
>
> >
>
> > Memory Array Mapped Address Handle: 0x000B
>
> >
>
> > Partition Row Position: Unknown
>
> >
>
> >
>
> >
>
> > Handle 0x0012, DMI type 17, 28 bytes
>
> >
>
> > Memory Device
>
> >
>
> > Array Handle: 0x000A
>
> >
>
> > Error Information Handle: Not Provided
>
> >
>
> > Total Width: 72 bits
>
> >
>
> > Data Width: 64 bits
>
> >
>
> > Size: 4096 MB
>
> >
>
> > Form Factor: DIMM
>
> >
>
> > Set: 5
>
> >
>
> > Locator: DIMM_Socket_P04
>
> >
>
> > Bank Locator: DIMM_CPU#0
>
> >
>
> > Type: DDR3
>
> >
>
> > Type Detail: Synchronous
>
> >
>
> > Speed: 1333 MHz
>
> >
>
> > Manufacturer: Samsung
>
> >
>
> > Serial Number: 34FA46D1
>
> >
>
> > Asset Tag:
>
> >
>
> > Part Number: M392B5273DH0-CH9
>
> >
>
> > Rank: 2
>
> >
>
> >
>
> >
>
> > Handle 0x0013, DMI type 20, 19 bytes
>
> >
>
> > Memory Device Mapped Address
>
> >
>
> > Starting Address: 0x00300000000
>
> >
>
> > Ending Address: 0x003FFFFFFFF
>
> >
>
> > Range Size: 4 GB
>
> >
>
> > Physical Device Handle: 0x0012
>
> >
>
> > Memory Array Mapped Address Handle: 0x000B
>
> >
>
> > Partition Row Position: Unknown
>
> >
>
> >
>
> >
>
> > Handle 0x0014, DMI type 17, 28 bytes
>
> >
>
> > Memory Device
>
> >
>
> > Array Handle: 0x000A
>
> >
>
> > Error Information Handle: Not Provided
>
> >
>
> > Total Width: 72 bits
>
> >
>
> > Data Width: 64 bits
>
> >
>
> > Size: 4096 MB
>
> >
>
> > Form Factor: DIMM
>
> >
>
> > Set: 7
>
> >
>
> > Locator: DIMM_Socket_P05
>
> >
>
> > Bank Locator: DIMM_CPU#0
>
> >
>
> > Type: DDR3
>
> >
>
> > Type Detail: Synchronous
>
> >
>
> > Speed: 1333 MHz
>
> >
>
> > Manufacturer: Samsung
>
> >
>
> > Serial Number: 34FA4735
>
> >
>
> > Asset Tag:
>
> >
>
> > Part Number: M392B5273DH0-CH9
>
> >
>
> > Rank: 2
>
> >
>
> >
>
> >
>
> > Handle 0x0015, DMI type 20, 19 bytes
>
> >
>
> > Memory Device Mapped Address
>
> >
>
> > Starting Address: 0x00400000000
>
> >
>
> > Ending Address: 0x004FFFFFFFF
>
> >
>
> > Range Size: 4 GB
>
> >
>
> > Physical Device Handle: 0x0014
>
> >
>
> > Memory Array Mapped Address Handle: 0x000B
>
> >
>
> > Partition Row Position: Unknown
>
> >
>
> >
>
> >
>
> > Handle 0x0016, DMI type 17, 28 bytes
>
> >
>
> > Memory Device
>
> >
>
> > Array Handle: 0x000A
>
> >
>
> > Error Information Handle: Not Provided
>
> >
>
> > Total Width: 72 bits
>
> >
>
> > Data Width: 64 bits
>
> >
>
> > Size: 4096 MB
>
> >
>
> > Form Factor: DIMM
>
> >
>
> > Set: 8
>
> >
>
> > Locator: DIMM_Socket_P06
>
> >
>
> > Bank Locator: DIMM_CPU#0
>
> >
>
> > Type: DDR3
>
> >
>
> > Type Detail: Synchronous
>
> >
>
> > Speed: 1333 MHz
>
> >
>
> > Manufacturer: Samsung
>
> >
>
> > Serial Number: 34FA475A
>
> >
>
> > Asset Tag:
>
> >
>
> > Part Number: M392B5273DH0-CH9
>
> >
>
> > Rank: 2
>
> >
>
> >
>
> >
>
> > Handle 0x0017, DMI type 20, 19 bytes
>
> >
>
> > Memory Device Mapped Address
>
> >
>
> > Starting Address: 0x00500000000
>
> >
>
> > Ending Address: 0x005FFFFFFFF
>
> >
>
> > Range Size: 4 GB
>
> >
>
> > Physical Device Handle: 0x0016
>
> >
>
> > Memory Array Mapped Address Handle: 0x000B
>
> >
>
> > Partition Row Position: Unknown
>
> >
>
> >
>
> >
>
> > Handle 0x0018, DMI type 32, 20 bytes
>
> >
>
> > System Boot Information
>
> >
>
> > Status: No errors detected
>
> >
>
> >
>
> >
>
> > Handle 0x0019, DMI type 38, 18 bytes
>
> >
>
> > IPMI Device Information
>
> >
>
> > Interface Type: KCS (Keyboard Control Style)
>
> >
>
> > Specification Version: 2.0
>
> >
>
> > I2C Slave Address: 0x4e
>
> >
>
> > NV Storage Device: Not Present
>
> >
>
> > Base Address: 0x0000000000000CA2 (I/O)
>
> >
>
> > Register Spacing: Successive Byte Boundaries
>
> >
>
> > Interrupt Number: 6
>
> >
>
> >
>
> >
>
> > Handle 0x0007, DMI type 11, 5 bytes
>
> >
>
> > OEM Strings
>
> >
>
> > String 1: $RC$.@
>
> >
>
> > String 2: Last Reset Cause: PowerOn, CPU, IPMI
>
> >
>
> >
>
> >
>
> > Handle 0x001A, DMI type 127, 4 bytes
>
> >
>
> > End Of Table
>
> >
>
> >
>
> >
>
> > address@hidden: ~]#
>
> --
>
> Albert Chu
>
> address@hidden
>
> Computer Scientist
>
> High Performance Systems Division
>
> Lawrence Livermore National Laboratory
>
>
>
>
>
>
--
Albert Chu
address@hidden
Computer Scientist
High Performance Systems Division
Lawrence Livermore National Laboratory
- Re: [Freeipmi-users] I would appreciate any advice on how to troubleshoot this issue.(ipmi_sdr_cache_create: internal IPMI error),
Albert Chu <=