[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Freeipmi-users] bmc-config - disable channels.
|
From: |
VJ |
|
Subject: |
Re: [Freeipmi-users] bmc-config - disable channels. |
|
Date: |
Mon, 23 Jan 2017 15:29:32 -0800 |
so even if I set :
Section Serial_Channel
Volatile_Access_Mode Disabled
EndSection
I get error :
ERROR: Failed to commit `Serial_Channel:Volatile_Access_Mode'
On Mon, Jan 23, 2017 at 3:06 PM, VJ <address@hidden> wrote:
> want to disable it for security purposes.
>
> Do you know how to do it using ipmitool 's raw command ?
>
> ipmitool -I lan -H 10.0.0.1 -p 623 -b 0 -t 0xb2 -U "admin" -P "admin" -l 0
> raw ? ?
>
>
> Thanks.
>
> On Mon, Jan 23, 2017 at 2:49 PM, Albert Chu <address@hidden> wrote:
>
>> Hi,
>>
>> Since you're trying to disable things like KCS, it wouldn't be done via
>> bmc-config, since that tool is more of an average-user interfacing tool.
>> Perhaps it'd be via the tool bmc-device, which has options for more
>> advanced needs.
>>
>> May I ask what the need is to disable things like KCS? It's quite an
>> advanced need.
>>
>> Al
>>
>> On Mon, 2017-01-23 at 14:32 -0800, VJ wrote:
>> > bmc-config -v checkout
>> >
>> >
>> > .....
>> > Section Serial_Channel
>> > EndSection
>> > #
>> > # Section Serial_Conf Comments
>> > #
>> > # In the Serial_Conf section, typical serial communication
>> > configuration is
>> > # setup. Most users will only be interested in IPMI over LAN,
>> > therefore this
>> > # section can generally be ignored.
>> > #
>> > Section Serial_Conf
>> > EndSection
>> >
>> >
>> >
>> >
>> >
>> >
>> > Lan_Conf seems fine.
>> >
>> >
>> >
>> >
>> > How do i disable channel 0,6 and 7
>> >
>> >
>> > Thanks.
>> >
>> > On Mon, Jan 23, 2017 at 2:29 PM, VJ <address@hidden> wrote:
>> > Device ID : 36
>> > Device Revision : 1
>> > Device SDRs : unsupported
>> > Firmware Revision : 1.17
>> > Device Available : yes (normal operation)
>> > IPMI Version : 2.0
>> > Sensor Device : supported
>> > SDR Repository Device : supported
>> > SEL Device : supported
>> > FRU Inventory Device : supported
>> > IPMB Event Receiver : supported
>> > IPMB Event Generator : supported
>> > Bridge : unsupported
>> > Chassis Device : supported
>> > Manufacturer ID : INVENTEC CORPORATION (6569)
>> > Product ID : 54
>> > Auxiliary Firmware Revision Information : 00000000h
>> >
>> >
>> > GUID : 00000000-0000-0000-0000-000000000000
>> >
>> >
>> > System Firmware Version : rsion1.0
>> > System Name : Manager
>> > Primary Operating System Name : SE Server 1.0
>> > Operating System Name :
>> >
>> >
>> > Channel Information
>> >
>> >
>> > Channel Number : 0
>> > Medium Type : IPMB (I2C)
>> > Protocol Type : IPMB-1.0
>> > Active Session Count : 0
>> > Session Support : session-less
>> > Vendor ID : Intelligent Platform Management
>> > Interface forum (7154)
>> >
>> >
>> > Channel Number : 1
>> > Medium Type : 802.3 LAN
>> > Protocol Type : IPMB-1.0
>> > Active Session Count : 0
>> > Session Support : multi-session
>> > Vendor ID : Intelligent Platform Management
>> > Interface forum (7154)
>> >
>> >
>> > Channel Number : 6
>> > Medium Type : IPMB (I2C)
>> > Protocol Type : IPMB-1.0
>> > Active Session Count : 0
>> > Session Support : session-less
>> > Vendor ID : Intelligent Platform Management
>> > Interface forum (7154)
>> >
>> >
>> > Channel Number : 7
>> > Medium Type : System Interface (KCS, SMIC, or BT)
>> > Protocol Type : KCS
>> > Active Session Count : 0
>> > Session Support : session-less
>> > Vendor ID : Intelligent Platform Management
>> > Interface forum (7154)
>> >
>> > On Mon, Jan 23, 2017 at 1:30 PM, Albert Chu <address@hidden>
>> > wrote:
>> > Hi,
>> >
>> > What are the other channel numbers (could you show via
>> > the output of
>> > bmc-info)?
>> >
>> > Also, could you elaborate on your use case scenario?
>> >
>> > Thanks,
>> >
>> > Al
>> >
>> > On Mon, 2017-01-23 at 13:18 -0800, VJ wrote:
>> > > I only see
>> > > 1) Lan_Channel
>> > > 2) Serial_Channel
>> > >
>> > >
>> > > there are 16 channels and they are not displayed
>> > even with -v
>> > >
>> > > On Thu, Jan 19, 2017 at 11:51 AM, Albert Chu
>> > <address@hidden> wrote:
>> > > Hi,
>> > >
>> > > Do you wish to disable a very specific
>> > channel number, so you
>> > > wish to be
>> > > able to enable/disable based on the input of
>> > a number? At the
>> > > moment
>> > > that isn't supported. Could you elaborate
>> > on your use case
>> > > scenario?
>> > >
>> > > Other channels are configurable in
>> > bmc-config if you specify
>> > > --verbose
>> > > when you checkout. If there are multiple
>> > lan channels you can
>> > > configure
>> > > both, other less common channels like serial
>> > are also output
>> > > for
>> > > configuration.
>> > >
>> > > Al
>> > >
>> > > On Thu, 2017-01-19 at 11:37 -0800, VJ wrote:
>> > > > Hi
>> > > >
>> > > > Can I disable a channel using bmc-config
>> > configuration ?
>> > > > I dont see the sections disabling or
>> > enabling other than lan
>> > > channel.
>> > > > I looked at bmc-config man page and it
>> > doesnt mention it.
>> > > >
>> > > > Thanks.
>> > >
>> > > >
>> > _______________________________________________
>> > > > Freeipmi-users mailing list
>> > > > address@hidden
>> > > >
>> > https://lists.gnu.org/mailman/listinfo/freeipmi-users
>> > >
>> > > --
>> > > Albert Chu
>> > > address@hidden
>> > > Computer Scientist
>> > > High Performance Systems Division
>> > > Lawrence Livermore National Laboratory
>> > >
>> > >
>> > >
>> > >
>> > >
>> > >
>> > > --
>> > >
>> > -----------------------------
>> ----------------------------------------------------------
>> > > ** Believe in : Hardwork Science God**
>> > > ============================================
>> > >
>> >
>> > --
>> > Albert Chu
>> > address@hidden
>> > Computer Scientist
>> > High Performance Systems Division
>> > Lawrence Livermore National Laboratory
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> > --
>> > -----------------------------------------------------------
>> ----------------------------
>> > ** Believe in : Hardwork Science God**
>> > ============================================
>> >
>> >
>> >
>> >
>> >
>> > --
>> > ------------------------------------------------------------
>> ---------------------------
>> > ** Believe in : Hardwork Science God**
>> > ============================================
>> >
>>
>> --
>> Albert Chu
>> address@hidden
>> Computer Scientist
>> High Performance Systems Division
>> Lawrence Livermore National Laboratory
>>
>>
>>
>
>
> --
> ------------------------------------------------------------
> ---------------------------
> ** Believe in : Hardwork Science God**
> ============================================
>
--
---------------------------------------------------------------------------------------
** Believe in : Hardwork Science God**
============================================
- [Freeipmi-users] bmc-config - disable channels., VJ, 2017/01/19
- Re: [Freeipmi-users] bmc-config - disable channels., Albert Chu, 2017/01/19
- Re: [Freeipmi-users] bmc-config - disable channels., VJ, 2017/01/23
- Re: [Freeipmi-users] bmc-config - disable channels., Albert Chu, 2017/01/23
- Re: [Freeipmi-users] bmc-config - disable channels., VJ, 2017/01/23
- Re: [Freeipmi-users] bmc-config - disable channels., VJ, 2017/01/23
- Re: [Freeipmi-users] bmc-config - disable channels., Albert Chu, 2017/01/23
- Re: [Freeipmi-users] bmc-config - disable channels., VJ, 2017/01/23
- Re: [Freeipmi-users] bmc-config - disable channels.,
VJ <=
- Re: [Freeipmi-users] bmc-config - disable channels., Albert Chu, 2017/01/23
- Re: [Freeipmi-users] bmc-config - disable channels., Albert Chu, 2017/01/23