freeipmi-users
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Freeipmi-users] Fwd: It is not possible to use `--fru-file` option in t


From: Konstantin Aladyshev
Subject: [Freeipmi-users] Fwd: It is not possible to use `--fru-file` option in the `ipmi-fru` utility on non-IPMI system
Date: Thu, 11 Feb 2021 11:39:54 +0300

Hi Al!

Thanks again! It solves the `ipmi_fru_multirecord_dc_load` problem.

But what about these messages? For every FRU binary output ends with this:
api/ipmi-api.c: 2231: ipmi_ctx_close: error 'device null' (1)
api/ipmi-api.c: 2276: ipmi_ctx_destroy: error 'device null' (1)

Is it normal?

For example:
./ipmi-fru --fru-file ~/fru_tools/masterfiles/ADRV9375-W.bin
  FRU Board Manufacturing Date/Time: 11/27/12 - 11:39:00
  FRU Board Manufacturer: Analog Devices
  FRU Board Product Name: Wide Tuning Range AD9375 Eval Brd
  FRU Board Serial Number: 0000
  FRU Board Part Number: ADRV9375-W/PCBZ
  FRU Board Custom Info: 00h 30h 31h 41h
  FRU Board Custom Info: 01h 30h 38h 2Dh 30h 34h 37h 30h 30h 30h
  FRU Board Custom Info: 02h 41h
  FRU Board Custom Info: 03h 59h

  FRU DC Output Output Number: 3
  FRU DC Output Output on Standy: No
  FRU DC Output Nominal Voltage: 2500 mV
  FRU DC Output Maximum Negative Voltage Deviation: 0 mV
  FRU DC Output Maximum Positive Voltage Deviation: 0 mV
  FRU DC Output Ripple and Noise pk-pk: 50 mV
  FRU DC Output Minimum Current Draw: 0 mA
  FRU DC Output Maximum Current Draw: 0 mA

  FRU DC Output Output Number: 4
  FRU DC Output Output on Standy: No
  FRU DC Output Nominal Voltage: 0 mV
  FRU DC Output Maximum Negative Voltage Deviation: 0 mV
  FRU DC Output Maximum Positive Voltage Deviation: 0 mV
  FRU DC Output Ripple and Noise pk-pk: 0 mV
  FRU DC Output Minimum Current Draw: 0 mA
  FRU DC Output Maximum Current Draw: 0 mA

  FRU DC Output Output Number: 5
  FRU DC Output Output on Standy: No
  FRU DC Output Nominal Voltage: 0 mV
  FRU DC Output Maximum Negative Voltage Deviation: 0 mV
  FRU DC Output Maximum Positive Voltage Deviation: 0 mV
  FRU DC Output Ripple and Noise pk-pk: 0 mV
  FRU DC Output Minimum Current Draw: 0 mA
  FRU DC Output Maximum Current Draw: 0 mA

  FRU DC Load Output Number: 0
  FRU DC Load Nominal Voltage: 2500 mV
  FRU DC Load Spec'd Minimum Voltage: 1800 mV
  FRU DC Load Spec'd Maximum Voltage: 2500 mV
  FRU DC Load Spec'd Ripple and Noise pk-pk: 50 mV
  FRU DC Load Minimum Current Load: 0 mA
  FRU DC Load Maximum Current Load: 1000 mA

  FRU DC Load Output Number: 1
  FRU DC Load Nominal Voltage: 3300 mV
  FRU DC Load Spec'd Minimum Voltage: 2970 mV
  FRU DC Load Spec'd Maximum Voltage: 3630 mV
  FRU DC Load Spec'd Ripple and Noise pk-pk: 0 mV
  FRU DC Load Minimum Current Load: 0 mA
  FRU DC Load Maximum Current Load: 500 mA

  FRU DC Load Output Number: 2
  FRU DC Load Nominal Voltage: 12000 mV
  FRU DC Load Spec'd Minimum Voltage: 10800 mV
  FRU DC Load Spec'd Maximum Voltage: 13200 mV
  FRU DC Load Spec'd Ripple and Noise pk-pk: 6 mV
  FRU DC Load Minimum Current Load: 500 mA
  FRU DC Load Maximum Current Load: 1000 mA

  FRU OEM Manufacturer ID: Ol'e Communications, Inc. (12A2h)
  FRU OEM Data: 00h 1Ch 1Ah 00h 00h 00h 40h 00h

  FRU OEM Manufacturer ID: Ol'e Communications, Inc. (12A2h)
  FRU OEM Data: 10h 42h 48h 5Eh 52h 16h 01h
api/ipmi-api.c: 2231: ipmi_ctx_close: error 'device null' (1)
api/ipmi-api.c: 2276: ipmi_ctx_destroy: error 'device null' (1)

Best regards,
Konstantin Aladyshev

On Wed, Feb 10, 2021 at 10:49 PM Al Chu <chu11@llnl.gov> wrote:
>
> Hi Konstantin,
>
> Doh! It seems I made a cut & paste bug parsing "DC Load" identical to
> "DC Output".
>
> I've updated the branch
> https://github.com/analogdevicesinc/fru_tools/tree/master/masterfiles
> with a few fixes.  It works for me now, could you try it out as a sanity 
> check?
>
> Al
>
> On Mon, 2021-02-08 at 15:26 +0300, Konstantin Aladyshev wrote:
> > Thanks Al!
> >
> > It helped. With this change the `ipmi-fru` utility can work on non-
> > IPMI systems.
> >
> > By the way, I've tried to run `ipmi-fru` on some FRU images from the
> > https://github.com/analogdevicesinc/fru_tools/tree/master/masterfiles
> > And not all things were parsed successfully. I don't know, either
> > these binaries have some non-standard records or  `ipmi-fru` lacks
> > some necessary features.
> > But just in case here are some logs:
> >
> > aladyshev@PC10319:~/freeipmi_fru/ipmi-fru$ ./ipmi-fru --fru-file
> > ~/fru_tools/masterfiles/AD-FMCADC2-EBZ-FRU.bin
> > FRU Inventory From File:
> > /home/aladyshev/fru_tools/masterfiles/AD-FMCADC2-EBZ-FRU.bin
> >
> >   FRU Board Manufacturing Date/Time: 10/09/14 - 16:23:00
> >   FRU Board Manufacturer: Analog Devices
> >   FRU Board Product Name: AD9625 FMC Sync board
> >   FRU Board Serial Number: 00008
> >   FRU Board Part Number: AD-FMCADC2-EBZ
> >   FRU Board Custom Info: 00h 44h
> >   FRU Board Custom Info: 01h 30h 33h 36h 30h 30h 37h
> >   FRU Board Custom Info: 02h 30h
> >   FRU Board Custom Info: 03h 59h
> >
> > fru/ipmi-fru-data.c: 1246: ipmi_fru_multirecord_dc_load: error 'field
> > not found' (7)
> > ipmi_fru_multirecord_dc_load: invalid parameters
> > api/ipmi-api.c: 2231: ipmi_ctx_close: error 'device null' (1)
> > api/ipmi-api.c: 2276: ipmi_ctx_destroy: error 'device null' (1)
> >
> >
> > aladyshev@PC10319:~/freeipmi_fru/ipmi-fru$ ./ipmi-fru --fru-file
> > ~/fru_tools/masterfiles/ADRV9371-W.bin
> > FRU Inventory From File:
> > /home/aladyshev/fru_tools/masterfiles/ADRV9371-W.bin
> >
> >   FRU Board Manufacturing Date/Time: 11/27/12 - 11:39:00
> >   FRU Board Manufacturer: Analog Devices
> >   FRU Board Product Name: Wide Tuning Range AD9371 Eval Brd
> >   FRU Board Serial Number: 0000
> >   FRU Board Part Number: ADRV9371-W/PCBZ
> >   FRU Board Custom Info: 00h 41h
> >   FRU Board Custom Info: 01h 30h 38h 2Dh 30h 34h 32h 35h 39h 31h
> >   FRU Board Custom Info: 02h 41h
> >   FRU Board Custom Info: 03h 59h
> >
> >   FRU DC Output Output Number: 3
> >   FRU DC Output Output on Standy: No
> >   FRU DC Output Nominal Voltage: 2500 mV
> >   FRU DC Output Maximum Negative Voltage Deviation: 0 mV
> >   FRU DC Output Maximum Positive Voltage Deviation: 0 mV
> >   FRU DC Output Ripple and Noise pk-pk: 50 mV
> >   FRU DC Output Minimum Current Draw: 0 mA
> >   FRU DC Output Maximum Current Draw: 0 mA
> >
> >   FRU DC Output Output Number: 4
> >   FRU DC Output Output on Standy: No
> >   FRU DC Output Nominal Voltage: 0 mV
> >   FRU DC Output Maximum Negative Voltage Deviation: 0 mV
> >   FRU DC Output Maximum Positive Voltage Deviation: 0 mV
> >   FRU DC Output Ripple and Noise pk-pk: 0 mV
> >   FRU DC Output Minimum Current Draw: 0 mA
> >   FRU DC Output Maximum Current Draw: 0 mA
> >
> >   FRU DC Output Output Number: 5
> >   FRU DC Output Output on Standy: No
> >   FRU DC Output Nominal Voltage: 0 mV
> >   FRU DC Output Maximum Negative Voltage Deviation: 0 mV
> >   FRU DC Output Maximum Positive Voltage Deviation: 0 mV
> >   FRU DC Output Ripple and Noise pk-pk: 0 mV
> >   FRU DC Output Minimum Current Draw: 0 mA
> >   FRU DC Output Maximum Current Draw: 0 mA
> >
> > fru/ipmi-fru-data.c: 1246: ipmi_fru_multirecord_dc_load: error 'field
> > not found' (7)
> > ipmi_fru_multirecord_dc_load: invalid parameters
> > api/ipmi-api.c: 2231: ipmi_ctx_close: error 'device null' (1)
> > api/ipmi-api.c: 2276: ipmi_ctx_destroy: error 'device null' (1)
> >
> >
> > Best regards,
> > Konstantin Aladyshev
> >
> >
> > On Sun, Feb 7, 2021 at 10:23 PM Al Chu <chu11@llnl.gov> wrote:
> > >
> > > Hi Konstantin,
> > >
> > > I have a fix at this branch on github if you could give it a shot:
> > >
> > > https://github.com/chu11/freeipmi-mirror/tree/ipmi_fru_file_only
> > >
> > > after downloading, to build:
> > >
> > > ./autogen.sh
> > > ./configure --enable-debug --enable-trace
> > > make
> > > ipmi-fru/ipmi-fru --fru-file=...
> > >
> > > There will be extra debugging output when running this.  If things
> > > look
> > > like its working, you can remove the "--enable-debug, --enable-
> > > trace"
> > > in the above to remove the debugging.
> > >
> > > Thanks,
> > >
> > > Al
> > >
> > >
> > > On Sat, 2021-02-06 at 09:32 -0800, Al Chu via Freeipmi-users wrote:
> > > > Hi Konstantin,
> > > >
> > > > Yeah, this seems to be a bug. I suppose it was always assumed
> > > > people
> > > > were on IPMI systems.  I believe this was initially added b/c
> > > > some
> > > > IPMI
> > > > developers wanted to debug/test their binaries.
> > > >
> > > > I'll add this as a TODO for myself and get back to you with a
> > > > test
> > > > branch you can try.
> > > >
> > > > Al
> > > >
> > > > On Fri, 2021-02-05 at 12:59 +0300, Konstantin Aladyshev wrote:
> > > > > Is it possible to use `ipmi-fru` utility to parse local binary
> > > > > FRU
> > > > > file?
> > > > > I want to do it from a separate host that doesn't have any IPMI
> > > > > devices.
> > > > > I thought that `--fru-file` option was designed specifically
> > > > > for
> > > > > this
> > > > > case, but I can't get it working:
> > > > >
> > > > > ~/freeipmi-1.6.6/ipmi-fru$ sudo ./ipmi-fru -v
> > > > > --fru-file=./AD-FMCADC2-EBZ-FRU.bin
> > > > > could not find inband device
> > > > >
> > > > > So there seems to be a bug that assumes you are always running
> > > > > on
> > > > > an
> > > > > IPMI system.
> > > > >
> > > > > Best regards,
> > > > > Konstantin Aladyshev
> > > > >
> > > > > _______________________________________________
> > > > > Freeipmi-users mailing list
> > > > > Freeipmi-users@gnu.org
> > > > > https://lists.gnu.org/mailman/listinfo/freeipmi-users
> > > >
> > > >
> > > > _______________________________________________
> > > > Freeipmi-users mailing list
> > > > Freeipmi-users@gnu.org
> > > > https://lists.gnu.org/mailman/listinfo/freeipmi-users
>



reply via email to

[Prev in Thread] Current Thread [Next in Thread]