gcl-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Gcl-devel] Build issue


From: Donald Winiecki
Subject: Re: [Gcl-devel] Build issue
Date: Thu, 10 Oct 2013 12:22:24 -0600

Apologies. Camm certainly knows the system better than do I.

I don't have Mint so can't test on my apparatus. Feeble as it is, I
can only say that works on Ubuntu 12.4.

_don



On Thu, Oct 10, 2013 at 12:13 PM, Blake McBride <address@hidden> wrote:
> I did the make clean only because of Camm's request to try as a solution to
> my original problem.  See his comment on the thread.
>
> Thanks!
>
>
> On Thu, Oct 10, 2013 at 12:29 PM, Donald Winiecki <address@hidden>
> wrote:
>>
>> Hi Blake,
>>
>> I hope I understand your situation and questions.
>>
>> I'm not sure you have to invoke `make clean'
>> <http://www.gnu.org/software/automake/manual/html_node/Clean.html#Clean>
>>
>> From what is said here
>>
>> <https://www.linuxquestions.org/questions/linux-software-2/what-is-the-difference-between-make-distclean-and-make-clean-284353/>
>> it appears that `make clean' will delete a lot of what you might want
>> to keep. Specifically:
>>
>> "make clean -- will delete almost all files made by ./configure and make
>> make distclean ( this dose not work on ALL programs but most ) will
>> remove ALL files made by ./configure and ALL files made by make"
>>
>> And while I'm not using Mint, the following is reliable for me on Ubuntu
>> 12.4.
>>
>> First, go to the directory in which you want the git to put things, then:
>>
>> $ git clone git://git.sv.gnu.org/gcl.git
>> $ cd gcl
>> $ git checkout Version_2_6_10pre     ; or git checkout Version_2_6_8,
>> git checkout Version 2_6_9, etc.
>> $ cd gcl
>> $ ./configure --enable-ansi && make
>>
>>
>> Hope this helps,
>>
>> _don
>>
>>
>>
>> On Thu, Oct 10, 2013 at 10:55 AM, Blake McBride <address@hidden>
>> wrote:
>> > Performing a "make clean" after a configure destroys ability to make.
>> >
>> > gcl.git has a clean clone
>> >
>> > mkdir gcl
>> > cd gcl
>> > cp -R ../gcl.git/* .
>> > cd gcl
>> > ./configure --enable-ansi
>> > make clean
>> > make
>> >
>> >
>> > address@hidden ~/Backup/gcl/gcl $ make
>> > make -C unixport final
>> > ar: ../o/gcllib.a: No such file or directory
>> > ls: cannot access ../o/*.o: No such file or directory
>> > ls: cannot access ../lsp/*.o: No such file or directory
>> > ls: cannot access ../xgcl-2/*.o: No such file or directory
>> > ls: cannot access ../cmpnew/*.o: No such file or directory
>> > ls: cannot access gcl_recompile?*.o: No such file or directory
>> > ls: cannot access ../mod/*.o: No such file or directory
>> > ls: cannot access ../pcl/*.o: No such file or directory
>> > ls: cannot access ../clcs/*.o: No such file or directory
>> > ls: cannot access ../clcs/clcs_*.lisp: No such file or directory
>> > make[1]: Entering directory `/home/blake/Backup/gcl/gcl/unixport'
>> > echo "(let ((si::*disable-recompile* nil)(compiler::*default-c-file*
>> > t)(compiler::*default-h-file* t)(compiler::*default-system-p*
>> > t)(compiler::*default-data-file*
>> > t))(si::compiler-state-fns)(si::do-recompile nil))" | ./
>> > /bin/sh: 1: ./: Permission denied
>> > make[1]: *** [final] Error 126
>> > make[1]: Leaving directory `/home/blake/Backup/gcl/gcl/unixport'
>> > make: *** [system] Error 2
>> >
>> >
>> > If I instead to a configure followed be a make I get the first problem.
>> >
>> > Thanks.
>> >
>> >
>> >
>> > On Wed, Oct 9, 2013 at 8:41 PM, Camm Maguire <address@hidden>
>> > wrote:
>> >>
>> >> Greetings!  I've confirmed this quickly, but also noted the problem
>> >> apparently disappears after a make clean and rebuild, and does not
>> >> appear with --enable-debug.  Will try to get to this soon, but am busy
>> >> working on the 2.6.10pre branch at the moment.  Please let me know if
>> >> any of the above works for you.
>> >>
>> >> Take care,
>> >>
>> >> Blake McBride <address@hidden> writes:
>> >>
>> >> > Greetings,
>> >> >
>> >> > I checked out the latest GCL via GIT and attempted to build on 32 bit
>> >> > LinuxMint 14.  I did:
>> >> >
>> >> > ./configure --enable-ansi
>> >> > make
>> >> >
>> >> > and I got:
>> >> >
>> >> > ........
>> >> > #<"TK" package>
>> >> >
>> >> >>
>> >> > #<"TK-PRIMITIVES" package>
>> >> >
>> >> >>
>> >> > #<"SYSTEM" package>
>> >> >
>> >> > SYSTEM>
>> >> > *COMMAND-ARGS*
>> >> >
>> >> > SYSTEM>
>> >> > ABS
>> >> >
>> >> > SYSTEM>
>> >> > #<function 00566c38>
>> >> >
>> >> > SYSTEM>
>> >> > #<function 00566c68>
>> >> >
>> >> > SYSTEM>
>> >> > #<function 00566c80>
>> >> >
>> >> > SYSTEM>
>> >> > #<function 00566c50>
>> >> >
>> >> > SYSTEM>loading
>> >> > /home/blake/Backup/gcl/gcl/unixport/../lsp/gcl_predlib.lsp
>> >> > loading /home/blake/Backup/gcl/gcl/unixport/../lsp/gcl_type.lsp
>> >> > loading /home/blake/Backup/gcl/gcl/unixport/../lsp/gcl_typep.lsp
>> >> > loading /home/blake/Backup/gcl/gcl/unixport/../lsp/gcl_typecase.lsp
>> >> > loading /home/blake/Backup/gcl/gcl/unixport/../lsp/gcl_assert.lsp
>> >> > loading /home/blake/Backup/gcl/gcl/unixport/../lsp/gcl_dl.lsp
>> >> > loading /home/blake/Backup/gcl/gcl/unixport/../lsp/gcl_rm.lsp
>> >> > loading /home/blake/Backup/gcl/gcl/unixport/../lsp/gcl_autoload.lsp
>> >> > loading /home/blake/Backup/gcl/gcl/unixport/../lsp/gcl_fle.lsp
>> >> > loading /home/blake/Backup/gcl/gcl/unixport/../lsp/gcl_setf.lsp
>> >> > loading /home/blake/Backup/gcl/gcl/unixport/../lsp/gcl_arraylib.lsp
>> >> > loading /home/blake/Backup/gcl/gcl/unixport/../lsp/gcl_seq.lsp
>> >> > loading /home/blake/Backup/gcl/gcl/unixport/../lsp/gcl_seqlib.lsp
>> >> > loading /home/blake/Backup/gcl/gcl/unixport/../lsp/gcl_mislib.lsp
>> >> > Segmentation fault
>> >> > make[1]: *** [saved_pre_gcl] Error 139
>> >> > rm raw_pre_gcl pre_init.lsp post_init.lsp
>> >> > make[1]: Leaving directory `/home/blake/Backup/gcl/gcl/unixport'
>> >> > make: *** [unixport/saved_pre_gcl] Error 2
>> >> >
>> >> > _______________________________________________
>> >> > Gcl-devel mailing list
>> >> > address@hidden
>> >> > https://lists.gnu.org/mailman/listinfo/gcl-devel
>> >>
>> >> --
>> >> Camm Maguire
>> >> address@hidden
>> >>
>> >> ==========================================================================
>> >> "The earth is but one country, and mankind its citizens."  --
>> >> Baha'u'llah
>> >
>> >
>> >
>> > _______________________________________________
>> > Gcl-devel mailing list
>> > address@hidden
>> > https://lists.gnu.org/mailman/listinfo/gcl-devel
>> >
>
>



reply via email to

[Prev in Thread] Current Thread [Next in Thread]