[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
more pl2303
From: |
Hein-Pieter van Braam |
Subject: |
more pl2303 |
Date: |
03 Apr 2002 00:29:46 +0200 |
hi all!
I have a couple of questions about my USB to serial converter and it's
use with gnokii.
about gnokiid:
I can run gnokiid and the AT commands are working (AT, ATZ) but it times
out when I try to make a call, I checked my trust pl2303 logs, and it
turns out that gnokiid doesn't send any data to the phone when I send an
ATDT command to it so calling isn't working...
about xgnokii/gnokii:
Everything is working but it is dog-slow, it is very choppy, I compiled
with debug turned on (nice ascii art BTW ;-)~ )
between two different "blocks" of data, for example a telephone number
it stops for about 3-5 second and then goes really fast and then halts
again, and empty places take about 10 seconds to complete.
when I modprobe the pl2303 module with debug=1 I get a lot of
pl2303_write - already writing messages, about after every action
(According to the log)
to wrap it all up:
I really hope you can help me, and that I might have helped you, I love
your software, finially got a chance to backup my phone (after about an
hour of waiting ;-)~) I also tried it with a "normal" serial port and
there the speed was pretty good! so I guess nobody ever tested it on an
usb to serial converter...
thanx a lot!
log when starting xgnokii contacts section:
--------------------------------------------log snip--------------------
Apr 3 00:20:30 linux kernel: pl2303.c: pl2303_read_bulk_callback - port
0
Apr 3 00:20:30 linux kernel: pl2303.c: pl2303_read_bulk_callback -
length = 6, data = 1e 0c 00 03 00 10
Apr 3 00:20:30 linux kernel: pl2303.c: pl2303_read_bulk_callback - port
0
Apr 3 00:20:30 linux kernel: pl2303.c: pl2303_read_bulk_callback -
length = 18, data = 01 1b 00 08 00 01 0f 00 00 08 33 00 00 00 01 47 22
42
Apr 3 00:20:30 linux kernel: pl2303.c: pl2303_write - port 0, 10 bytes
Apr 3 00:20:30 linux kernel: pl2303.c: pl2303_write - length = 10, data
= 1e 00 0c 7f 00 02 03 07 11 7a
Apr 3 00:20:30 linux kernel: pl2303.c: pl2303_write - port 0, 24 bytes
Apr 3 00:20:30 linux kernel: pl2303.c: pl2303_write - already writing
Apr 3 00:20:30 linux kernel: pl2303.c: pl2303_write_bulk_callback -
port 0
Apr 3 00:20:33 linux kernel: pl2303.c: pl2303_write - port 0, 24 bytes
Apr 3 00:20:33 linux kernel: pl2303.c: pl2303_write - length = 24, data
= 1e 00 0c 03 00 10 00 01 00 07 01 01 00 01 00 05 00 75 00 00 01 42 12
27
Apr 3 00:20:33 linux kernel: pl2303.c: pl2303_write_bulk_callback -
port 0
Apr 3 00:20:33 linux kernel: pl2303.c: pl2303_read_bulk_callback - port
0
Apr 3 00:20:33 linux kernel: pl2303.c: pl2303_read_bulk_callback -
length = 9, data = 1e 0c 00 7f 00 02 03 82 1d
Apr 3 00:20:33 linux kernel: pl2303.c: pl2303_read_bulk_callback - port
0
Apr 3 00:20:33 linux kernel: pl2303.c: pl2303_read_bulk_callback -
length = 1, data = f3
Apr 3 00:20:33 linux kernel: pl2303.c: pl2303_read_bulk_callback - port
0
Apr 3 00:20:33 linux kernel: pl2303.c: pl2303_read_bulk_callback -
length = 2, data = 1e 0c
Apr 3 00:20:33 linux kernel: pl2303.c: pl2303_read_bulk_callback - port
0
Apr 3 00:20:33 linux kernel: pl2303.c: pl2303_read_bulk_callback -
length = 22, data = 00 03 00 10 01 1b 00 08 00 01 0f 00 00 08 33 00 00
00 01 40 22 45
Apr 3 00:20:33 linux kernel: pl2303.c: pl2303_write - port 0, 10 bytes
Apr 3 00:20:33 linux kernel: pl2303.c: pl2303_write - length = 10, data
= 1e 00 0c 7f 00 02 03 00 11 7d
Apr 3 00:20:33 linux kernel: pl2303.c: pl2303_write - port 0, 24 bytes
Apr 3 00:20:33 linux kernel: pl2303.c: pl2303_write - already writing
Apr 3 00:20:33 linux kernel: pl2303.c: pl2303_write_bulk_callback -
port 0
----------------------------------------/snip------------------------
- more pl2303,
Hein-Pieter van Braam <=