Irda with inpspiron 8000 and Nokia 8210

[Nils Gundelach]

Hi all, 

i want to connect my Nokia 8210 with a Dell Inspiron 8000 over Irda, but
i can't get it working :/ 

Here is my setup: 

Nokia 8210 V5.25 20-09-00 NSM-3 

Debian woody with self-compiled kernel 2.4.19 and gnokii 0.4.3 from 
http://freesoftware.fsf.org/download/gnokii/

kernel setup: 
# 
# IrDA (infrared) support 
# 
CONFIG_IRDA=m 
CONFIG_IRLAN=m 
CONFIG_IRNET=m 
CONFIG_IRCOMM=m 
CONFIG_IRDA_ULTRA=y 
CONFIG_IRDA_CACHE_LAST_LSAP=y 
CONFIG_IRDA_FAST_RR=y 
CONFIG_IRDA_DEBUG=y 

# 
# Infrared-port device drivers 
# 
CONFIG_IRTTY_SIR=m 
CONFIG_IRPORT_SIR=m 
# CONFIG_DONGLE is not set 
# CONFIG_USB_IRDA is not set 
# CONFIG_NSC_FIR is not set 
# CONFIG_WINBOND_FIR is not set 
# CONFIG_TOSHIBA_FIR is not set 
# CONFIG_SMC_IRCC_FIR is not set 
# CONFIG_ALI_FIR is not set 
# CONFIG_VLSI_FIR is not set 


[*20:09:address@hidden/0]:/tmp # lsmod | grep ^ir 
ircomm-tty             30240   1  (autoclean) 
ircomm                 13164   0  (autoclean) [ircomm-tty] 
irtty                   7424   1  (autoclean) 
irda                  142512   2  (autoclean) [ircomm-tty ircomm irtty] 
[*20:09:address@hidden/0]:/tmp # 


[*20:10:address@hidden/0]:/tmp/gnokii-0.4.3/Docs # cat /etc/irda.conf
#irda.conf Version: 1.0 
IRDADEV=/dev/ttyS1
DONGLE=none 
DISCOVERY=-s 
ENABLE=yes # if you don't need to start irattach, set "no" 
[*20:12:address@hidden/0]:/tmp/gnokii-0.4.3/Docs # 

[*20:14:address@hidden/0]:/tmp # /etc/init.d/irda start 
Starting IrDA service: 1.1 Tue Nov  9 15:30:55 1999 Dag Brattli 
irattach. 
[*20:15:address@hidden/0]:/tmp # 

looks good 

[*20:27:address@hidden/0]:/tmp # irdadump 
...
18:27:29.643997 xid:cmd ffffffff < 97220000 S=6 s=5 (14) 
18:27:29.753997 xid:cmd ffffffff < 97220000 S=6 s=* Nokia 8210 hint=b125
[ PnP Modem Fax Telephony IrCOMM IrOBEX ] (27) 
18:27:30.403998 xid:cmd ffffffff < 97220000 S=6 s=0 (14) 
...

hm OK

[*20:32:address@hidden/0]:/tmp # grep '^[a-z]'  /etc/gnokiirc 
port = /dev/ircomm0
model = 8210
initlength = 1
connection = serial
bindir = /usr/local/sbin/
use_locking = yes
serial_baudrate = 19200
require_dcd = 1
timeout = 10

enabled infrared on phone and did:

[*20:32:address@hidden/0]:/tmp # gnokii --identify

GNOKII Version 0.4.3
Lockfile /var/lock/LCK..ircomm0 is stale. Overriding it..
Telephone interface init failed! Quitting.

I ran all the commands as root in order to prevent permission problems.
Any hints ? I have no ideas :/

thanks,
Nils
-- 
My Key "gpg --keyserver wwwkeys.eu.pgp.net --recv-key 45CD0073"
Fingerprint = F4D9 9274 6ED8 B227 A62A  33FA 0D2E 2414 45CD 0073
http://www.darktec.org /|\ address@hidden on #irc.de #linux.de
Premature optimization is the root of all evil.  - D. Knuth