RE: Tekram IR-210B & 6110 - Hopeless?

[Szabo, Tamas]

Hi,

I've same problem. I have no solution (yet?). See mails regarding "6150
through infrared"

Sza2.

Problems with Windows - Reboot.
Problems with Linux       - Be root.


> -----Original Message-----
> From: Gaute Amundsen [SMTP:address@hidden
> Sent: 2002. szeptember 12. 11:27
> To:   address@hidden
> Subject:      Tekram IR-210B & 6110 - Hopeless?
> 
> Hi.
> 
> Problems problems problems...
> Sorry to bother you all, but I am about ready to give up on this combo.
> 
> Correct me if I am wrong.
> 6110 is just about the last model in the nokia line that do not speak
> propper 
> full blown irda, and the IR-210B is the only dongle that will not suport 
> gnokis own infrared mode..
> 
> I don't have the feeling that I completely grasp the various relationships
> 
> between all the parts of this setup however, and this ignorance leaves me 
> hope :->
> 
> What I manage to get so far is:
> 
> Loads of nice irdadump waving of hands - ie. not quite handshaking.
> 
> 
> 23:38:51.255925 xid:cmd 0c65585c > ffffffff S=6 s=5 (14)
> 23:38:51.345928 xid:cmd 0c65585c > ffffffff S=6 s=* mumrik hint=8c04 [ 
> Computer Printer IrCOMM ] (23)
> 23:38:51.345911 xid:rsp 0c65585c < 08320000 S=6 s=5 Nokia 6100 hint=8101 [
> 
> PnP Telephony ] (28)
> 23:38:53.805931 xid:cmd 0c65585c > ffffffff S=6 s=0 (14)
> 
> 
> With gnoki sett up as if the 6110 would talk irda, and some indecent
> fiddling 
> with the source, I can get this:
> 
> 
> address@hidden root]# /usr/local/bin/gnokii --identify
> GNOKII Version 0.4.3
> Opened configuration file /root/.gnokiirc
> Added new section global
> Adding key/value port//dev/ircomm0
> Adding key/value model/6110
> Adding key/value initlength/1
> Adding key/value connection/irda
> Adding key/value bindir//usr/local/sbin/
> Adding key/value use_locking/yes
> Adding key/value serial_baudrate/19200
> Adding key/value require_dcd/1
> Added new section connect_script
> Adding key/value TELEPHONE/12345678
> Added new section disconnect_script
> Added new section sms
> Adding key/value timeout/10
> Lockfile /var/lock/LCK..ircomm0 is stale. Overriding it..
> Serial device: opening device /dev/ircomm0
> unknown fucker: Nokia 6100      8320000
> unknown fucker: Nokia 6100      8320000
> and so on....
> 
> 
> Killing irattach, and trying "infrared" mode the best I can manage is:
> 
> 
> address@hidden root]# /usr/local/bin/gnokii --identify
> GNOKII Version 0.4.3
> Opened configuration file /root/.gnokiirc
> Added new section global
> Adding key/value port//dev/ttyS0
> Adding key/value model/6110
> Adding key/value initlength/1
> Adding key/value connection/infrared
> Adding key/value bindir//usr/local/sbin/
> Adding key/value use_locking/yes
> Adding key/value serial_baudrate/19200
> Adding key/value handshake/software
> Added new section connect_script
> Adding key/value TELEPHONE/12345678
> Added new section disconnect_script
> Added new section sms
> Adding key/value timeout/10
> Serial device: opening device /dev/ttyS0
> Serial device: setting RTS to low and DTR to high
> IR init, retry=0
> Serial device: setting speed to 9600
> Serial device: setting speed to 115200
> My IR init succeeded
> Getting phone info (old way)...
> Message sent: 0xd1 / 0x0005
> 00 01 00 03 00                                  |
> SM_Block Retry - 0
> Message sent: 0xd1 / 0x0005
> 00 01 00 03 00                                  |
> SM_Block Retry - 1
> Message sent: 0xd1 / 0x0005
> 00 01 00 03 00                                  |
> SM_Block Retry - 2
> Telephone interface init failed! Quitting.
> 
> 
> What I can not manage is to get minicom to talk to the phone.
> Ther are some hints that it might be possible to use ir serial and GSMLIB
> to 
> access the phone, but since I can not get minicom connected I have not
> tried 
> this...
> 
> Now, what do you all reckon? Where should I spend my effort? 
> Putting the dongle back in the packing nicely, and pretend I never opened
> it, 
> fiddling more with the config, trying gsmlib or minicom, or perhaps having
> a 
> go at the tekram code in gnoki?
> 
> As it is, it seems this is the only dongle anybody in town selling,
> otherwise 
> I think I would have traded it in already..
> 
> As I said, I am stuck, so please somebody give me a hint.
> 
> Thanks :-)
> 
> Gaute Amundsen
>  
> 
> 
> 
> _______________________________________________
> gnokii-users mailing list
> address@hidden
> http://mail.freesoftware.fsf.org/mailman/listinfo/gnokii-users


**********************************************************************************************
The information contained in this message or any of its attachments may be 
confidential and is intended for the exclusive use of the addressee(s). Any 
disclosure, reproduction, distribution or other dissemination or use of this 
communication is strictly prohibited without the express permission of the 
sender. The views expressed in this email are those of the individual and not 
necessarily those of Sony or Sony affiliated companies. Sony email is for 
business use only. 

This email and any response may be monitored by Sony United Kingdom Limited.
(05)
**********************************************************************************************