[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Make Call frame for Nokia 3310
From: |
Irfan Habib |
Subject: |
Make Call frame for Nokia 3310 |
Date: |
Fri, 10 Jun 2005 07:13:04 -0700 (PDT) |
Hi,
As part of my interfacing project I need to interface
a nokia 3310 with a microcontroller (89c52), which
will dial to phone when some interrupt is generated.
Obviously I have to manually generate the frames and
send to the phone in order to make it dial however, I
dont understand one think about the documentation of
the FBUS make call frame:
s Make call { 0x0001, "number", type,
block }
where type:
0x01 - data call
0x05 - voice
call
block:
data call (non digital lines):
0x02,0x01,0x05,0x81,0x01,0x00,0x00,0x01,0x02,0x0a,
0x07,0xa2,0x88,0x81,0x21,0x15,0x63,0xa8,0x00,0x00
data call (digital lines):
0x02,0x01,0x05,0x81,0x01,0x00,0x00,0x01,0x02,0x0a,
0x07,0xa1,0x88,0x89,0x21,0x15,0x63,0xa0,0x00,0x06,
0x88,0x90,0x21,0x48,0x40,0xbb
voice call:
0x01, 0x01, 0x05, 0x81/0x00, sendnum,
0x00, 0x00, 0x01
where:
sendnum (own
number sending):
0x01:
preset (depends on network)
0x03: on
0x02:
off
Now how does the message start with:
0x0001 or 0x01
and what is the difference b/w voice call and data
call,
DO I have to include all the hexdecimal sequence
mentioned for digital lines and non-digitallines, or
just any hexdecimal number is fine?
And what baudrate does the nokia 3310 work, I mean I
can set the microcontroller to 100s of bps but It wont
work unless both sides have the same baudrate.
__________________________________
Yahoo! Mail Mobile
Take Yahoo! Mail with you! Check email on your mobile phone.
http://mobile.yahoo.com/learn/mail
- Make Call frame for Nokia 3310,
Irfan Habib <=