Problem with dku-5 cable.

[Peter Hanula]

I am unable to get my (not genuine) dku-5 cable working.

Here is lsusb output:
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 014: ID 0451:3410 Texas Instruments, Inc. TUSB3410
Microcontroller
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000

dmesg:
usb 3-2: hotplug
usb 3-2: new full speed USB device using uhci_hcd and address 14
usb 3-2: ep0 maxpacket = 8
usb 3-2: default language 0x0409
usb 3-2: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-2: Product: TUSB3410 Boot Device
usb 3-2: Manufacturer: Texas Instruments
usb 3-2: SerialNumber: TUSB3410
usb 3-2: hotplug
usb 3-2: configuration #1 chosen from 2 choices
usb 3-2: adding 3-2:1.0 (config #1, interface 0)
usb 3-2:1.0: hotplug
usbserial_generic 3-2:1.0: usb_probe_interface
usbserial_generic 3-2:1.0: usb_probe_interface - got id
ti_usb_3410_5052 3-2:1.0: usb_probe_interface
ti_usb_3410_5052 3-2:1.0: usb_probe_interface - got id
ti_usb_3410_5052 3-2:1.0: TI USB 3410 1 port adapter converter detected
ti_usb_3410_5052: probe of 3-2:1.0 failed with error -5

The cable is working perfectly under windows. My kernel verion is
2.6.14.4. Phone attached to my dku-5 is Nokia 6020.

I really need help with this one. Any suggestions?