Nokia 5140i, "Gnokii serial_open: open: Message too long"

[sir Hendrik III]

Dear gnokii users,

I just tried using my phone (nokia 5140i) with gnokii, I read a few reports 
it worked, but I didn't get it working.
I get a strange mesage "Gnokii serial_open: open: Message too long". When I 
check the kernel logs, I think the problem is with the usbserial module, but 
does someone know this problem or has a solution?

Here is what I did:

$>modprobe ark3116 debug=1
$>dmesg
Dec  4 10:50:11 groenekoeien usbcore: registered new interface driver 
usbserial
Dec  4 10:50:11 groenekoeien drivers/usb/serial/usb-serial.c: USB Serial 
support registered for generic
Dec  4 10:50:11 groenekoeien usbcore: registered new interface driver 
usbserial_generic
Dec  4 10:50:11 groenekoeien drivers/usb/serial/usb-serial.c: USB Serial 
Driver core
Dec  4 10:50:11 groenekoeien drivers/usb/serial/usb-serial.c: USB Serial 
support registered for ark3116
Dec  4 10:50:11 groenekoeien ark3116 4-2:0.0: ark3116 converter detected
Dec  4 10:50:11 groenekoeien drivers/usb/serial/ark3116.c: 003 > ok
Dec  4 10:50:11 groenekoeien drivers/usb/serial/ark3116.c: 004 > ok
Dec  4 10:50:11 groenekoeien drivers/usb/serial/ark3116.c: 005 > ok
Dec  4 10:50:11 groenekoeien drivers/usb/serial/ark3116.c: 006 > ok
Dec  4 10:50:11 groenekoeien drivers/usb/serial/ark3116.c: 007 < -71 bytes 
[0x00]
Dec  4 10:50:11 groenekoeien drivers/usb/serial/ark3116.c: 008 > ok
Dec  4 10:50:11 groenekoeien drivers/usb/serial/ark3116.c: 009 > ok
Dec  4 10:50:11 groenekoeien drivers/usb/serial/ark3116.c: 010 > ok
Dec  4 10:50:11 groenekoeien drivers/usb/serial/ark3116.c: 011 > ok
Dec  4 10:50:11 groenekoeien drivers/usb/serial/ark3116.c: 012 < -71 bytes 
[0x00]
Dec  4 10:50:11 groenekoeien drivers/usb/serial/ark3116.c: 013 > ok
Dec  4 10:50:11 groenekoeien drivers/usb/serial/ark3116.c: 014 < -71 bytes 
[0x00]
Dec  4 10:50:11 groenekoeien drivers/usb/serial/ark3116.c: 015 > ok
Dec  4 10:50:11 groenekoeien drivers/usb/serial/ark3116.c: 016 < -71 bytes 
[0x00]
Dec  4 10:50:11 groenekoeien drivers/usb/serial/ark3116.c: 017 > ok
Dec  4 10:50:11 groenekoeien drivers/usb/serial/ark3116.c: 018 < -71 bytes 
[0x00]
Dec  4 10:50:11 groenekoeien drivers/usb/serial/ark3116.c: 019 > ok
Dec  4 10:50:11 groenekoeien drivers/usb/serial/ark3116.c: 020 < -71 bytes 
[0x00]
Dec  4 10:50:11 groenekoeien drivers/usb/serial/ark3116.c: 147 > ok
Dec  4 10:50:11 groenekoeien drivers/usb/serial/ark3116.c: 148 > ok
Dec  4 10:50:11 groenekoeien drivers/usb/serial/ark3116.c: 149 > ok
Dec  4 10:50:11 groenekoeien drivers/usb/serial/ark3116.c: 150 > ok
Dec  4 10:50:11 groenekoeien drivers/usb/serial/ark3116.c: 151 < -71 bytes 
[0x00]
Dec  4 10:50:11 groenekoeien drivers/usb/serial/ark3116.c: 152 > ok
Dec  4 10:50:11 groenekoeien drivers/usb/serial/ark3116.c: 153 < -71 bytes 
[0x00]
Dec  4 10:50:11 groenekoeien drivers/usb/serial/ark3116.c: 154 > ok
Dec  4 10:50:11 groenekoeien usb 4-2: ark3116 converter now attached to 
ttyUSB0
Dec  4 10:50:11 groenekoeien usbcore: registered new interface driver 
ark3116

$>gnokii --identify
GNOKII Version 0.6.22
Gnokii serial_open: open: Message too long
Couldn't open FBUS device: Message too long
Gnokii serial_open: open: Message too long
Couldn't open FBUS device: Message too long
Telephone interface init failed: Command failed.
Quitting.


$>dmesg
Dec  4 10:50:42 groenekoeien drivers/usb/serial/ark3116.c: ark3116_open - 
port 0
Dec  4 10:50:42 groenekoeien ark3116 ttyUSB0: usb_serial_generic_open - 
failed resubmitting read urb, error -90

$>cat .gnokiirc
[global]
port = /dev/ttyUSB0
model = 6510
initlength = default
connection = dku5
use_locking = yes
serial_baudrate = 19200
smsc_timeout = 10
[gnokiid]
bindir = /usr/sbin/
[connect_script]
TELEPHONE = 12345678
[disconnect_script]
[logging]
debug = on
rlpdebug = off
xdebug = off

Thanks in advance,
Joren

_________________________________________________________________
Zoeken is nog nooit zo eenvoudig geweest! http://desktop.msn.nl