Re: gnokii sendsms problem with special characters after ubuntu upgrade

[Pablo Reyes]

any ideas? :(

Regards...

Pablo Reyes
Blog: www.pabloreyes.com.ar

On Fri, Oct 23, 2015 at 9:41 AM, Pablo Reyes <address@hidden> wrote:

Hi! 

My model is USB. This is the debug output:

GNOKII Version 0.6.30
LOG: debug mask is 0x1
Config read from file gnokiirc-ttyUSB.
phone instance config:
model = AT
port = /dev/ttyUSB60
connection = serial
initlength = default
serial_baudrate = 19200
serial_write_usleep = -1
handshake = software
require_dcd = 0
smsc_timeout = 20
rfcomm_channel = 0
sm_retry = 0
Initializing AT capable mobile phone ...
Serial device: opening device /dev/ttyUSB60
Serial device: setting RTS to high and DTR to high
Message sent: 0x00 / 0x0004
41 54 5a 0d                                     | ATZ             
write: [ATZ<cr>]
read : [ATZ<cr><cr><lf>OK<cr><lf>]
Message received: 0x00 / 0x000a
02 41 54 5a 0d 0d 0a 4f 4b 0d                   |  ATZ   OK       
Received message type 00
Message sent: 0x00 / 0x0005
41 54 45 31 0d                                  | ATE1            
write: [ATE1<cr>]
read : [OK<cr><lf>]
Message received: 0x00 / 0x0004
02 4f 4b 0d                                     |  OK             
Received message type 00
Message sent: 0x00 / 0x000a
41 54 2b 43 4d 45 45 3d 31 0d                   | AT+CMEE=1       
write: [AT+CMEE=1<cr>]
read : [OK<cr><lf>]
Message received: 0x00 / 0x0004
02 4f 4b 0d                                     |  OK             
Received message type 00
Message sent: 0x06 / 0x0007
41 54 2b 47 4d 4d 0d                            | AT+GMM          
write: [AT+GMM<cr>]
read : [E303<cr><lf><cr><lf>OK<cr><lf>]
Message received: 0x06 / 0x000c
02 45 33 30 33 0d 0a 0d 0a 4f 4b 0d             |  E303    OK     
Received message type 06
Message sent: 0x06 / 0x0008
41 54 2b 43 47 4d 49 0d                         | AT+CGMI         
write: [AT+CGMI<cr>]
read : [OK<cr><lf>]
Message received: 0x06 / 0x0004
02 4f 4b 0d                                     |  OK             
Received message type 06
Message sent: 0x63 / 0x0009
41 54 2b 43 53 43 53 3f 0d                      | AT+CSCS?        
write: [AT+CSCS?<cr>]
read : [AT+CMEE=1<cr><cr><lf>OK<cr><lf>]
Message received: 0x63 / 0x0010
02 41 54 2b 43 4d 45 45 3d 31 0d 0d 0a 4f 4b 0d |  AT+CMEE=1   OK 
Received message type 63
Initialisation completed
Message sent: 0x63 / 0x000a
41 54 2b 43 53 43 53 3d 3f 0d                   | AT+CSCS=?       
write: [AT+CSCS=?<cr>]
read : [AT+GMM<cr><cr><lf>E303<cr><lf><cr><lf>OK<cr><lf>]
Message received: 0x63 / 0x0015
02 41 54 2b 47 4d 4d 0d 0d 0a 45 33 30 33 0d 0a |  AT+GMM   E303  
0d 0a 4f 4b 0d                                  |   OK            
Received message type 63
Message sent: 0x23 / 0x0009
41 54 2b 43 53 43 41 3f 0d                      | AT+CSCA?        
write: [AT+CSCA?<cr>]
read : [+CSCA: "+54079000890",145<cr><lf><cr><lf>OK<cr><lf>]
Message received: 0x23 / 0x0021
02 2b 43 53 43 41 3a 20 22 2b 35 34 30 37 39 30 |  +CSCA: "+540790
30 30 38 39 30 22 2c 31 34 35 0d 0a 0d 0a 4f 4b | 00890",145    OK
0d                                              |                 
Received message type 23
Cannot read the SMSC number from your phone. If the sms send will fail, please use --smsc option explicitely giving the number.
=====> ENTER gn_sms_send()
General Data Coding
Default Alphabet
encoded size: 4
rawsms length: 4
rawsms user data length: 4
dcs: 0x00
Length: 0x04
user_data_length: 0x04
ValidityIndicator: 2
user_data: FD77FF0D
Input is 6 characters long
SMS is 4 octets long
Number of extended alphabet chars: 0
Sending
Message sent: 0x65 / 0x000a
41 54 2b 43 4d 47 46 3d 30 0d                   | AT+CMGF=0       
write: [AT+CMGF=0<cr>]
read : [AT+CMGF=0<cr><cr><lf>OK<cr><lf>]
Message received: 0x65 / 0x0010
02 41 54 2b 43 4d 47 46 3d 30 0d 0d 0a 4f 4b 0d |  AT+CMGF=0   OK 
Received message type 65
PDU mode set
Sending initial sequence
Message sent: 0x66 / 0x000b
41 54 2b 43 4d 47 53 3d 31 37 0d                | AT+CMGS=17      
write: [AT+CMGS=17<cr>]
read : [AT+CMGS=17<cr><cr><lf>> ]
Message received: 0x66 / 0x000f
01 41 54 2b 43 4d 47 53 3d 31 37 0d 0d 0a 3e    |  AT+CMGS=17   > 
Received message type 66
Got response: No error.
Sending frame: 0011000A8162403566000000AA04FD77FF0D
Message sent: 0x21 / 0x0025
30 30 31 31 30 30 30 41 38 31 36 32 34 30 33 35 | 0011000A81624035
36 36 30 30 30 30 30 30 41 41 30 34 46 44 37 37 | 66000000AA04FD77
46 46 30 44 1a                                  | FF0D            
write: [0011000A8162403566000000AA04FD77FF0D^Z]
read : [+CMGS: 143<cr><lf><cr><lf>OK<cr><lf>]
Message received: 0x21 / 0x0012
02 2b 43 4d 47 53 3a 20 31 34 33 0d 0a 0d 0a 4f |  +CMGS: 143    O
4b 0d                                           | K               
Received message type 21
Send succeeded with reference -1!
Serial device: closing device

My command 

echo "ñoño" | gnokii --config gnokiirc-ttyUSB --sendsms 260453xxxx

My cellphone receive

")o )o"

Thanks a lot in advance. Regards...

Pablo Reyes
Blog: www.pabloreyes.com.ar

On Tue, Oct 20, 2015 at 7:37 PM, Daniele Forsi <address@hidden> wrote:

Pablo Reyes wrote:

> When migrate to Ubuntu 12 and gnokii v 0.6.30, special characters don't
> work.

the ñ is part of the Default GSM Alphabet so it must work with every
device but we need to see the debug output to understand what is going
wrong; it is enabled in your config with this:
[logging]
debug = on

with model=AT it is easy to extract the PDU and then use the fake
driver to decode it, see "Advanced usage " in
http://wiki.gnokii.org/index.php/Fake_driver
--
Daniele Forsi

_______________________________________________
gnokii-users mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/gnokii-users