qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH v2 14/20] mac_via: work around underflow in TimeDBRA timing l


From: Laurent Vivier
Subject: Re: [PATCH v2 14/20] mac_via: work around underflow in TimeDBRA timing loop in SETUPTIMEK
Date: Tue, 26 Sep 2023 10:04:01 +0200
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101 Thunderbird/102.13.0

Le 09/09/2023 à 11:48, Mark Cave-Ayland a écrit :
The MacOS toolbox ROM calculates the number of branches that can be executed
per millisecond as part of its timer calibration. Since modern hosts are
considerably quicker than original hardware, the negative counter reaches zero
before the calibration completes leading to division by zero later in
CALCULATESLOD.

Instead of trying to fudge the timing loop (which won't work for 
TimeDBRA/TimeSCCDB
anyhow), use the pattern of access to the VIA1 registers to detect when 
SETUPTIMEK
has finished executing and write some well-known good timer values to TimeDBRA
and TimeSCCDB taken from real hardware with a suitable scaling factor.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
---
  hw/misc/mac_via.c         | 115 ++++++++++++++++++++++++++++++++++++++
  hw/misc/trace-events      |   1 +
  include/hw/misc/mac_via.h |   3 +
  3 files changed, 119 insertions(+)

diff --git a/hw/misc/mac_via.c b/hw/misc/mac_via.c
index baeb73eeb3..766a32a95d 100644
--- a/hw/misc/mac_via.c
+++ b/hw/misc/mac_via.c
@@ -16,6 +16,7 @@
   */
#include "qemu/osdep.h"
+#include "exec/address-spaces.h"
  #include "migration/vmstate.h"
  #include "hw/sysbus.h"
  #include "hw/irq.h"
@@ -871,6 +872,112 @@ static void via1_auxmode_update(MOS6522Q800VIA1State *v1s)
      }
  }
+/*
+ * Addresses and real values for TimeDBRA/TimeSCCB to allow timer calibration
+ * to succeed (NOTE: both values have been multiplied by 3 to cope with the
+ * speed of QEMU execution on a modern host
+ */
+#define MACOS_TIMEDBRA        0xd00
+#define MACOS_TIMESCCB        0xd02
+
+#define MACOS_TIMEDBRA_VALUE  (0x2a00 * 3)
+#define MACOS_TIMESCCB_VALUE  (0x079d * 3)
+
+static bool via1_is_toolbox_timer_calibrated(void)
+{
+    /*
+     * Indicate whether the MacOS toolbox has been calibrated by checking
+     * for the value of our magic constants
+     */
+    uint16_t timedbra = lduw_be_phys(&address_space_memory, MACOS_TIMEDBRA);
+    uint16_t timesccdb = lduw_be_phys(&address_space_memory, MACOS_TIMESCCB);
+
+    return (timedbra == MACOS_TIMEDBRA_VALUE &&
+            timesccdb == MACOS_TIMESCCB_VALUE);
+}
+
+static void via1_timer_calibration_hack(MOS6522Q800VIA1State *v1s, int addr,
+                                        uint64_t val, int size)
+{
+    /*
+     * Work around timer calibration to ensure we that we have non-zero and
+     * known good values for TIMEDRBA and TIMESCCDB.
+     *
+     * This works by attempting to detect the reset and calibration sequence
+     * of writes to VIA1
+     */
+    int old_timer_hack_state = v1s->timer_hack_state;
+
+    switch (v1s->timer_hack_state) {
+    case 0:
+        if (addr == VIA_REG_PCR && val == 0x22) {
+            /* VIA_REG_PCR: configure VIA1 edge triggering */
+            v1s->timer_hack_state = 1;
+        }
+        break;
+    case 1:
+        if (addr == VIA_REG_T2CL && val == 0xc) {
+            /* VIA_REG_T2CL: low byte of 1ms counter */
+            if (!via1_is_toolbox_timer_calibrated()) {
+                v1s->timer_hack_state = 2;
+            } else {
+                v1s->timer_hack_state = 0;
+            }
+        }
+        break;
+    case 2:
+        if (addr == VIA_REG_T2CH && val == 0x3) {
+            /*
+             * VIA_REG_T2CH: high byte of 1ms counter (very likely at the
+             * start of SETUPTIMEK)
+             */
+            if (!via1_is_toolbox_timer_calibrated()) {
+                v1s->timer_hack_state = 3;
+            } else {
+                v1s->timer_hack_state = 0;
+            }
+        }
+        break;
+    case 3:
+        if (addr == VIA_REG_IER && val == 0x20) {
+            /*
+             * VIA_REG_IER: update at end of SETUPTIMEK
+             *
+             * Timer calibration has finished: unfortunately the values in
+             * TIMEDBRA (0xd00) and TIMESCCDB (0xd02) are so far out they
+             * cause divide by zero errors.
+             *
+             * Update them with values obtained from a real Q800 but with
+             * a x3 scaling factor which seems to work well
+             */
+            stw_be_phys(&address_space_memory, MACOS_TIMEDBRA,
+                        MACOS_TIMEDBRA_VALUE);
+            stw_be_phys(&address_space_memory, MACOS_TIMESCCB,
+                        MACOS_TIMESCCB_VALUE);
+
+            v1s->timer_hack_state = 4;
+        }
+        break;
+    case 4:
+        /*
+         * This is the normal post-calibration timer state: we should
+         * generally remain here unless we detect the A/UX calibration
+         * loop, or a write to VIA_REG_PCR suggesting a reset
+         */
+        if (addr == VIA_REG_PCR && val == 0x22) {
+            /* Looks like there has been a reset? */
+            v1s->timer_hack_state = 1;
+        }
+        break;
+    default:
+        g_assert_not_reached();
+    }
+
+    if (old_timer_hack_state != v1s->timer_hack_state) {
+        trace_via1_timer_hack_state(v1s->timer_hack_state);
+    }
+}
+
  static uint64_t mos6522_q800_via1_read(void *opaque, hwaddr addr, unsigned 
size)
  {
      MOS6522Q800VIA1State *s = MOS6522_Q800_VIA1(opaque);
@@ -896,6 +1003,9 @@ static void mos6522_q800_via1_write(void *opaque, hwaddr 
addr, uint64_t val,
      MOS6522State *ms = MOS6522(v1s);
addr = (addr >> 9) & 0xf;
+
+    via1_timer_calibration_hack(v1s, addr, val, size);
+
      mos6522_write(ms, addr, val, size);
switch (addr) {
@@ -1008,6 +1118,9 @@ static void mos6522_q800_via1_reset_hold(Object *obj)
      adb_set_autopoll_enabled(adb_bus, true);
      v1s->cmd = REG_EMPTY;
      v1s->alt = REG_EMPTY;
+
+    /* Timer calibration hack */
+    v1s->timer_hack_state = 0;
  }
static void mos6522_q800_via1_realize(DeviceState *dev, Error **errp)
@@ -1100,6 +1213,8 @@ static const VMStateDescription vmstate_q800_via1 = {
          VMSTATE_INT64(next_second, MOS6522Q800VIA1State),
          VMSTATE_TIMER_PTR(sixty_hz_timer, MOS6522Q800VIA1State),
          VMSTATE_INT64(next_sixty_hz, MOS6522Q800VIA1State),
+        /* Timer hack */
+        VMSTATE_INT32(timer_hack_state, MOS6522Q800VIA1State),
          VMSTATE_END_OF_LIST()
      }
  };
diff --git a/hw/misc/trace-events b/hw/misc/trace-events
index c9bdb0d30e..0c9762fdf6 100644
--- a/hw/misc/trace-events
+++ b/hw/misc/trace-events
@@ -272,6 +272,7 @@ via1_adb_send(const char *state, uint8_t data, const char 
*vadbint) "state %s da
  via1_adb_receive(const char *state, uint8_t data, const char *vadbint, int status, int 
index, int size) "state %s data=0x%02x vADBInt=%s status=0x%x index=%d size=%d"
  via1_adb_poll(uint8_t data, const char *vadbint, int status, int index, int size) 
"data=0x%02x vADBInt=%s status=0x%x index=%d size=%d"
  via1_auxmode(int mode) "setting auxmode to %d"
+via1_timer_hack_state(int state) "setting timer_hack_state to %d"
# grlib_ahb_apb_pnp.c
  grlib_ahb_pnp_read(uint64_t addr, unsigned size, uint32_t value) "AHB PnP read 
addr:0x%03"PRIx64" size:%u data:0x%08x"
diff --git a/include/hw/misc/mac_via.h b/include/hw/misc/mac_via.h
index 422da43bf9..63cdcf7c69 100644
--- a/include/hw/misc/mac_via.h
+++ b/include/hw/misc/mac_via.h
@@ -74,6 +74,9 @@ struct MOS6522Q800VIA1State {
      int64_t next_second;
      QEMUTimer *sixty_hz_timer;
      int64_t next_sixty_hz;
+
+    /* SETUPTIMEK hack */
+    int timer_hack_state;
  };
Reviewed-by: Laurent Vivier <laurent@vivier.eu>




reply via email to

[Prev in Thread] Current Thread [Next in Thread]