[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Traverso-devel] jack bus confusion
From: |
Philipp Überbacher |
Subject: |
Re: [Traverso-devel] jack bus confusion |
Date: |
Thu, 26 Aug 2010 21:08:26 +0200 |
User-agent: |
Sup/0.11 |
Excerpts from plutek's message of 2010-08-26 20:21:53 +0200:
> Excerpts from Philipp Überbacher's message of Thu Aug 26 13:52:55 -0400 2010:
> > Excerpts from plutek's message of 2010-08-26 19:23:25 +0200:
> > >
> > > greetings!
> > >
> > > working with current git, it is unclear to me how to connect track inputs
> > > to my system:capture_1 (etc.) inputs which exist in jack. i'm using an
> > > RME Multiface, and have 18 such inputs. when traverso is started, my
> > > connections panel in qjackctl shows my 18 system inputs and two traverso
> > > outputs on the left side, and only my 18 system outputs on the right side
> > > -- there is no input entry for traverso at all.
> > >
> > > if i go to a track properties panel in traverso, the "Inputs" section
> > > shows Capture 1-2 greyed out, and they cannot be removed or changed. the
> > > "Set Input" dropdown contains nothing at all.
> > >
> > > i'm confused. how do i access my 18 jack capture ports to connect to
> > > track inputs? am i missing some setup thingy?
> > >
> > > thanks much... cheers!
> >
> > Hi Peter,
> > which version of Traverso are you using?
> > As far as I know, 0.49.X does only support two jack input and output
> > ports.
> >
> > However, a lot has changed in the git version, especially with regards
> > to jack. It allows for any number of jack ports and has a more powerful
> > internal routing. It's not exactly stable yet, but it's worth a try.
>
> thanks, philipp!
>
> yes, i'm using current git.
>
> i know that the jack routing has seen considerable expansion and work lately
> -- that's why i'm more interested than ever. i just don't see how to connect
> arbitrary jack capture ports to traverso inputs.
>
> cheers!
Hi Peter,
I just tried it myself again after a while, and it seems to be still
broken in a couple of ways.
What should give you jack in/out ports is a new track: <ctrl> + <t>.
But judging from my brief test it's still unusable. I did manage to
record something but couldn't get it to play back. The ports of removed
tracks didn't disappear, etc.
--
Philipp
--
"Wir stehen selbst enttäuscht und sehn betroffen / Den Vorhang zu
und alle Fragen offen." Bertolt Brecht, Der gute Mensch von Sezuan