Well, I've now upgraded, but am getting strange results. See attached
PDFs. The raw XVI are OK, but in NewPassage_CL.PDF, each LRUD
parallelogram seems to be flipped over. Below is the raw NewPassage.th
file. Note that the centreline output of the entire cave (UF_CL.pdf)
handles NewPassage slightly better (but still not perfectly) than
NewPassage on its own.
Am I doing something wrong?
- Ben
encoding utf-8
survey NewPassage -title "New Passage"
centreline
equate address@hidden address@hidden
endcentreline
survey Leg1 # From Boulder Choke to Walk The Plank
centerline
flags duplicate # duplicate of Boulder Choke legs for reference in
th2 file.
extend right
data normal from to length compass clino left right up down
bc32 bc33 2.33 201 -54 1.1 0.3 0.5
0.3 #33 (Through Easy Squeeze)
data normal from to length compass clino
bc33 bc34 3.07 239 -39
data normal from to length compass clino left right up down
bc34 bc35 2.49 231 -57 0.9 0.3 0.5
0.6 #35
bc35 bc36 2.13 194 -37 0.4 0 0.2
0.8 #36
bc36 bc37 2.5 141 +06 0.5 0 0.8
0 #37
bc37 bc38 3.74 139 -09 1.6 0.2 0.7
1.5 #38
bc38 bc39a 2.75 136 -10 0 1.15 1.6
1.0 #39
bc39a 1 0.01 136 -10 6 1.15
5 1.0 #1 LRUD Est
flags not duplicate
extend left
data normal from to length compass clino
1 bc40 11 052 +43
extend right
mark 1 painted
data normal\
from to length compass clino left right up
down
1 2 29.46 153 -25 4.3 2.4 4.8
1.4 #2
station 2 "Emergency Dump"
2 3 16.09 144 -04 3.4 3.0 2.9
1.4 #3
3 4 11.44 142 -11 4.2 2.0 0.9
1.6 #4
4 5 9.48 142 -29 1.5 1.3 3.4
1.2 #5
5 6 6.08 166.5 -18 0.2 0.4 2.2
0.8 #6
6 7 3.22 154 -09 2.0 0.8 0.5
0.5 #7
7 8 1.75 140 -04 1.7 0.6 1.1
1.0 #8
8 9 9.27 178.5 -12.5 1.2 1.3 0.5
1.0 #9
9 10 1.6 159.5 -20.5 0.2 1.3 0.6
0.6 #10
10 11 2.95 156 -11 0.9 0.3 1.0
0.2 #11
11 12 5.36 131 +03 1.5 1.2 6.7
0.5 #12
12 13 8.17 124.5 +06 0 0.7 6.2
1.6 #13
13 14 8.37 132 +7.5 0.9 2.7 2.2
1.8 #14
14 15 8.81 147 -10 0.8 2.1 5.4
1.4 #15
15 16 5.75 235 -10.5 0 1.0 5.6
1.0 #16
16 17 6.54 272 +2 0.7 0 5.1
1.3 #17
17 18 2.81 245 -19 0 0.3 0.4
0.6 #18
18 19 7.54 262 0 0 1.7 5.1
0.8 #19
19 20 6.03 263 -2 1.0 0.6 3.6
0.7 #20
20 21 2.26 205 -2 0 0.6 0.6
0.5 #21
20 20a 4 325 0 0 1 2
0.5 #20a estimated LRUD
21 22 4.58 162 +9 0.7 0 5.2
1.3 #22
22 23 4.15 144 -4 1.0 0.2 0.5
1.0 #23
23 24 13.68 140.5 -2.5 1.5 1.5 4.9
0.6 #24
24 25 8.61 216 +6 0 2.3 1.5
1.8 #25
25 26 4.58 304 -13 1.1 0.9 1.8
1.0 #26
26 27 12.65 281 +1 0.4 1.2 2.2
1.3 #27
27 28 5.59 304 -5 0.8 1.2 1.2
0.9 #28
28 29 5.46 275 -6 0.2 1.0 0.5
0.4 #29
29 30 3.63 312 +2 0.4 0 2.7
0.5 #30
#31 30 10.16 103 -3.5 0.5 0.8 0.2 1.4 #31
30 31 10.16 283 +3.5 0.5 0.8 0.2
1.4 #31 REVERSED
31 32 4.48 276 +3 1.0 0.4 1.6
1.4 #32
32 33 8.42 286 -5 1.5 0.8 1.8
0.7 #33
33 34 14.82 271 +1 0.3 2.2 3.2
1.2 #34
34 35 20.06 290.5 +2 2.5 1 2
1.5 #35 estimated LRUD
mark 35 painted # address@hidden
endcentreline
endsurvey # Leg1
-----Original Message-----
From: address@hidden [mailto:address@hidden On
Behalf Of Cooper, Ben
Sent: 11 November 2007 19:56
To: address@hidden
Subject: Re: [Therion] Printing xvi maps (done with pdf's)
Aha - thanks Stacho. I'm still on 0.5.0. Upgrading now...!
Regards,
- Ben
-----Original Message-----
From: address@hidden [mailto:address@hidden On
Behalf Of Stacho Mudrak
Sent: 08 November 2007 19:53
To: address@hidden
Subject: Re: [Therion] Printing xvi maps (done with pdf's)
Just few remarks:
1. Did you use latest version of therion (0.5.1)? It is a new feature
in that version.
2. You may also use other colors that gray. Just add
color map-fg [100 50 50]
to your layout. Numbers mean intensities of red, green and blue.
3. Options in layout and export command are the same. In layout, you can
use
color map-fg 50
and in export command option -layout-color map-fg 50
HTH, S.
Bruce Mutton wrote:
Ben
I tried Stacho's suggestion, and it worked fine, although I think he
abbreviated the syntax of the export command a bit much. Here's my
more
verbose version...
layout bruce-map-export
north true
scale 1 500
base-scale 1 500
units metric
page-grid on
grid-size 100 100 100 metres
# layout-map-header 0 0 s #causes error?
legend on
statistics explo all
statistics topo all
statistics carto all
statistics copyright all
debug on
endlayout
export map -projection plan -layout bruce-map-export \
-layout-color map-fg 90 \
-output SurveyPlan.pdf -fmt pdf
Try this Ben. The 90 gives a passage that is more lightly shaded than
50.
Good Luck
Bruce
-----Original Message-----
From: address@hidden [mailto:address@hidden On
Behalf
Of Cooper, Ben
Sent: Friday, 9 November 2007 3:44 a.m.
To: address@hidden
Subject: Re: [Therion] Printing xvi maps
Hi Stacho,
I've been wanting to get print-outs of XVI, too, so I am verry
interested in your recommendation, below. I've tried it, but this is
the result I get: only the centreline is visible, not LRUD.
- Ben Cooper
-----Original Message-----
From: address@hidden [mailto:address@hidden On
Behalf Of Stacho Mudrak
Sent: 06 November 2007 12:24
To: address@hidden
Subject: Re: [Therion] Printing xvi maps
...<text removed>...
Stacho's Example:
source
map centerline-map
my-survey
endmap
endsource
select centerline-map
export map.pdf -layout-color map-fg 50 -layout-scale 1 500
... where my-survey is the name of top-level survey.
...<text removed>...
Regards, S.
_______________________________________________
Therion mailing list
address@hidden
http://www.speleo.sk/mailman/listinfo/therion
_______________________________________________
Therion mailing list
address@hidden
http://www.speleo.sk/mailman/listinfo/therion
_______________________________________________
Therion mailing list
address@hidden
http://www.speleo.sk/mailman/listinfo/therion
------------------------------------------------------------------------
_______________________________________________
Therion mailing list
address@hidden
http://www.speleo.sk/mailman/listinfo/therion