|
From: | Ben Cooper |
Subject: | Re: [Therion] Printing xvi maps (done with pdf's) |
Date: | Tue, 13 Nov 2007 20:11:21 -0000 |
Here is the raw data for NewPassage that reproduces the problem in the pdf that isn't in the xvi. I've included a th2 file as a "viewer" for the XVI. Most of my survey legs are commented... Note that the BenPlan.pdf that Bruce produced also had a problem. Although each LRUD section was not flipped as here, the passage width from one LRUD section to the next shows a discontinuity which is again different to the xvi, and incorrect. See for example at stations Leg1.2 and Leg1.4. Regards, - Ben -----Original Message----- From: address@hidden [mailto:address@hidden On Behalf Of Stacho Mudrak Sent: 13 November 2007 12:24 To: address@hidden Subject: Re: [Therion] Printing xvi maps (done with pdf's) Quoting "Cooper, Ben" <address@hidden>: > I will extract the relevant files and generate the problem tonight and > send in. The interesting thing is that the raw xvi is OK, whereas the > PDF is muddled up. This would be great! The PDF code is just <copy & paste> of XVI code - so obviosly I copied something wrong. Regards, S. > Regards, > - Ben > > > -----Original Message----- > From: address@hidden [mailto:address@hidden On > Behalf Of Stacho Mudrak > Sent: 12 November 2007 20:37 > To: address@hidden > Subject: Re: [Therion] Printing xvi maps (done with pdf's) > > Hmmm, there really seems to be some BUG in the program. Are you able to > separate files, which produce these strange maps (including config > files)? > > It would be great, if you could send them to me that I can debug the > program. With your file attached - I receive (as Bruce did) same more or > > less correct result. But there is evidently some problem with LRUD > orientation in the program. > > Thanks, S. > > Cooper, Ben wrote: > > Well, I've now upgraded, but am getting strange results. See attached > > PDFs. The raw XVI are OK, but in NewPassage_CL.PDF, each LRUD > > parallelogram seems to be flipped over. Below is the raw > NewPassage.th > > file. Note that the centreline output of the entire cave (UF_CL.pdf) > > handles NewPassage slightly better (but still not perfectly) than > > NewPassage on its own. > > > > Am I doing something wrong? > > - Ben > > > > > > encoding utf-8 > > survey NewPassage -title "New Passage" > > centreline > > equate address@hidden address@hidden > > endcentreline > > survey Leg1 # From Boulder Choke to Walk The Plank > > centerline > > flags duplicate # duplicate of Boulder Choke legs for reference > in > > th2 file. > > extend right > > data normal from to length compass clino left right up down > > bc32 bc33 2.33 201 -54 1.1 0.3 0.5 > > 0.3 #33 (Through Easy Squeeze) > > data normal from to length compass clino > > bc33 bc34 3.07 239 -39 > > data normal from to length compass clino left right up down > > bc34 bc35 2.49 231 -57 0.9 0.3 0.5 > > 0.6 #35 > > bc35 bc36 2.13 194 -37 0.4 0 0.2 > > 0.8 #36 > > bc36 bc37 2.5 141 +06 0.5 0 0.8 > > 0 #37 > > bc37 bc38 3.74 139 -09 1.6 0.2 0.7 > > 1.5 #38 > > bc38 bc39a 2.75 136 -10 0 1.15 1.6 > > 1.0 #39 > > bc39a 1 0.01 136 -10 6 1.15 > > 5 1.0 #1 LRUD Est > > flags not duplicate > > > > extend left > > data normal from to length compass clino > > 1 bc40 11 052 +43 > > > > extend right > > mark 1 painted > > data normal\ > > from to length compass clino left right up > > down > > 1 2 29.46 153 -25 4.3 2.4 4.8 > > 1.4 #2 > > station 2 "Emergency Dump" > > 2 3 16.09 144 -04 3.4 3.0 2.9 > > 1.4 #3 > > 3 4 11.44 142 -11 4.2 2.0 0.9 > > 1.6 #4 > > 4 5 9.48 142 -29 1.5 1.3 3.4 > > 1.2 #5 > > 5 6 6.08 166.5 -18 0.2 0.4 2.2 > > 0.8 #6 > > 6 7 3.22 154 -09 2.0 0.8 0.5 > > 0.5 #7 > > 7 8 1.75 140 -04 1.7 0.6 1.1 > > 1.0 #8 > > 8 9 9.27 178.5 -12.5 1.2 1.3 0.5 > > 1.0 #9 > > 9 10 1.6 159.5 -20.5 0.2 1.3 0.6 > > 0.6 #10 > > 10 11 2.95 156 -11 0.9 0.3 1.0 > > 0.2 #11 > > 11 12 5.36 131 +03 1.5 1.2 6.7 > > 0.5 #12 > > 12 13 8.17 124.5 +06 0 0.7 6.2 > > 1.6 #13 > > 13 14 8.37 132 +7.5 0.9 2.7 2.2 > > 1.8 #14 > > 14 15 8.81 147 -10 0.8 2.1 5.4 > > 1.4 #15 > > 15 16 5.75 235 -10.5 0 1.0 5.6 > > 1.0 #16 > > 16 17 6.54 272 +2 0.7 0 5.1 > > 1.3 #17 > > 17 18 2.81 245 -19 0 0.3 0.4 > > 0.6 #18 > > 18 19 7.54 262 0 0 1.7 5.1 > > 0.8 #19 > > 19 20 6.03 263 -2 1.0 0.6 3.6 > > 0.7 #20 > > 20 21 2.26 205 -2 0 0.6 0.6 > > 0.5 #21 > > 20 20a 4 325 0 0 1 2 > > 0.5 #20a estimated LRUD > > 21 22 4.58 162 +9 0.7 0 5.2 > > 1.3 #22 > > 22 23 4.15 144 -4 1.0 0.2 0.5 > > 1.0 #23 > > 23 24 13.68 140.5 -2.5 1.5 1.5 4.9 > > 0.6 #24 > > 24 25 8.61 216 +6 0 2.3 1.5 > > 1.8 #25 > > 25 26 4.58 304 -13 1.1 0.9 1.8 > > 1.0 #26 > > 26 27 12.65 281 +1 0.4 1.2 2.2 > > 1.3 #27 > > 27 28 5.59 304 -5 0.8 1.2 1.2 > > 0.9 #28 > > 28 29 5.46 275 -6 0.2 1.0 0.5 > > 0.4 #29 > > 29 30 3.63 312 +2 0.4 0 2.7 > > 0.5 #30 > > #31 30 10.16 103 -3.5 0.5 0.8 0.2 1.4 #31 > > 30 31 10.16 283 +3.5 0.5 0.8 0.2 > > 1.4 #31 REVERSED > > 31 32 4.48 276 +3 1.0 0.4 1.6 > > 1.4 #32 > > 32 33 8.42 286 -5 1.5 0.8 1.8 > > 0.7 #33 > > 33 34 14.82 271 +1 0.3 2.2 3.2 > > 1.2 #34 > > 34 35 20.06 290.5 +2 2.5 1 2 > > 1.5 #35 estimated LRUD > > mark 35 painted # address@hidden > > endcentreline > > endsurvey # Leg1 > > > > > > -----Original Message----- > > From: address@hidden [mailto:address@hidden On > > Behalf Of Cooper, Ben > > Sent: 11 November 2007 19:56 > > To: address@hidden > > Subject: Re: [Therion] Printing xvi maps (done with pdf's) > > > > Aha - thanks Stacho. I'm still on 0.5.0. Upgrading now...! > > Regards, > > - Ben > > > > -----Original Message----- > > From: address@hidden [mailto:address@hidden On > > Behalf Of Stacho Mudrak > > Sent: 08 November 2007 19:53 > > To: address@hidden > > Subject: Re: [Therion] Printing xvi maps (done with pdf's) > > > > Just few remarks: > > > > 1. Did you use latest version of therion (0.5.1)? It is a new feature > > > in that version. > > > > 2. You may also use other colors that gray. Just add > > color map-fg [100 50 50] > > to your layout. Numbers mean intensities of red, green and blue. > > > > 3. Options in layout and export command are the same. In layout, you > can > > use > > > > color map-fg 50 > > > > and in export command option -layout-color map-fg 50 > > > > HTH, S. > > > > Bruce Mutton wrote: > >> Ben > >> I tried Stacho's suggestion, and it worked fine, although I think he > >> abbreviated the syntax of the export command a bit much. Here's my > > more > >> verbose version... > >> > >> layout bruce-map-export > >> north true > >> scale 1 500 > >> base-scale 1 500 > >> units metric > >> > >> page-grid on > >> grid-size 100 100 100 metres > >> # layout-map-header 0 0 s #causes error? > >> legend on > >> statistics explo all > >> statistics topo all > >> statistics carto all > >> statistics copyright all > >> debug on > >> endlayout > >> > >> export map -projection plan -layout bruce-map-export \ > >> -layout-color map-fg 90 \ > >> -output SurveyPlan.pdf -fmt pdf > >> > >> Try this Ben. The 90 gives a passage that is more lightly shaded > than > > 50. > >> Good Luck > >> Bruce > >> > >> -----Original Message----- > >> From: address@hidden [mailto:address@hidden On > > Behalf > >> Of Cooper, Ben > >> Sent: Friday, 9 November 2007 3:44 a.m. > >> To: address@hidden > >> Subject: Re: [Therion] Printing xvi maps > >> > >> Hi Stacho, > >> I've been wanting to get print-outs of XVI, too, so I am verry > >> interested in your recommendation, below. I've tried it, but this is > >> the result I get: only the centreline is visible, not LRUD. > >> - Ben Cooper > >> > >> -----Original Message----- > >> From: address@hidden [mailto:address@hidden On > >> Behalf Of Stacho Mudrak > >> Sent: 06 November 2007 12:24 > >> To: address@hidden > >> Subject: Re: [Therion] Printing xvi maps > >> > >> > >> ...<text removed>... > >> > >> Stacho's Example: > >> > >> source > >> map centerline-map > >> my-survey > >> endmap > >> endsource > >> > >> select centerline-map > >> export map.pdf -layout-color map-fg 50 -layout-scale 1 500 > >> > >> > >> ... where my-survey is the name of top-level survey. > >> > >> ...<text removed>... > >> > >> Regards, S. > >> > >> _______________________________________________ > >> Therion mailing list > >> address@hidden > >> http://www.speleo.sk/mailman/listinfo/therion > > _______________________________________________ > > Therion mailing list > > address@hidden > > http://www.speleo.sk/mailman/listinfo/therion > > _______________________________________________ > > Therion mailing list > > address@hidden > > http://www.speleo.sk/mailman/listinfo/therion > > > > > > > ------------------------------------------------------------------------ > > > > _______________________________________________ > > Therion mailing list > > address@hidden > > http://www.speleo.sk/mailman/listinfo/therion > _______________________________________________ > Therion mailing list > address@hidden > http://www.speleo.sk/mailman/listinfo/therion > _______________________________________________ > Therion mailing list > address@hidden > http://www.speleo.sk/mailman/listinfo/therion > _______________________________________________ Therion mailing list address@hidden http://www.speleo.sk/mailman/listinfo/therion -- This email has been verified as Virus free Virus Protection and more available at http://www.plus.net
thconfig.NewPassage.tp
Description: Binary data
NewPassage_CL.pdf
Description: Adobe PDF document
NewPassage.pdf
Description: Adobe PDF document
NewPassage.th2
Description: Binary data
NewPassage.xvi
Description: Binary data
NewPassage.th
Description: Binary data
_______________________________________________ Therion mailing list address@hidden http://www.speleo.sk/mailman/listinfo/therion
[Prev in Thread] | Current Thread | [Next in Thread] |