[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Automake-NG] [PATCH 09/26] [ng] texi: refactoring in texibuild.am
From: |
Akim Demaille |
Subject: |
Re: [Automake-NG] [PATCH 09/26] [ng] texi: refactoring in texibuild.am |
Date: |
Sun, 17 Jun 2012 08:50:18 +0200 |
Le 16 juin 2012 à 23:29, Stefano Lattarini a écrit :
> This is only to simplify future changes; no semantic change is
> intended.
>
> * lib/am/texibuild.am
> (am__texibuild_info): New internal make function.
> (%.info: %.%TEXI-SUFFIX%): Use it for the recipe.
> (am__texibuild_html): New internal make function.
> (%.html: %.%TEXI-SUFFIX%): Use it for the recipe.
Much better this way. Especially since there are
several extensions.
> Signed-off-by: Stefano Lattarini <address@hidden>
> ---
> lib/am/texibuild.am | 32 ++++++++++++++++++++------------
> 1 file changed, 20 insertions(+), 12 deletions(-)
>
> diff --git a/lib/am/texibuild.am b/lib/am/texibuild.am
> index 710b525..a81bcf2 100644
> --- a/lib/am/texibuild.am
> +++ b/lib/am/texibuild.am
> @@ -29,8 +29,8 @@ define am__texibuild_dvi_or_pdf
> $2 %TEXIQUIET% --clean -o $@ $< %TEXIDEVNULL%
> endef
>
> -%.info: %.%TEXI-SUFFIX%
> - $(if $(am__info_insrc),,@$(am__ensure_target_dir_exists))
> +define am__texibuild_info
> + $(if $1,,@$(am__ensure_target_dir_exists))
> ## Back up the info files before running makeinfo. This is the cheapest
> ## way to ensure that
> ## 1) If the texinfo file shrinks (or if you start using --no-split),
> @@ -40,7 +40,7 @@ endef
> ## to fail, the info files are not removed. (They are needed by the
> ## developer while he writes documentation.)
> %AM_V_MAKEINFO%restore=: && backupdir=.am$$$$ && \
> - $(if $(am__info_insrc),am__cwd=`pwd` && $(am__cd) $(srcdir) &&) \
> + $(if $1,am__cwd=`pwd` && $(am__cd) $(srcdir) &&) \
> rm -rf $$backupdir && mkdir $$backupdir && \
> ## If makeinfo is not installed we must not backup the files so
> ## 'missing' can do its job and touch $@ if it exists.
> @@ -54,22 +54,17 @@ endef
> $(am__makeinfoflags) -o $@ $<; \
> then \
> rc=0; \
> - $(if $(am__info_insrc),$(am__cd) $(srcdir);) \
> + $(if $(am__info_insrc),$(am__cd) $(srcdir);) \
> else \
> rc=$$?; \
> ## Beware that backup info files might come from a subdirectory.
> - $(if $(am__info_insrc),$(am__cd) $(srcdir) &&) \
> + $(if $(am__info_insrc),$(am__cd) $(srcdir) &&) \
> $$restore $$backupdir/* $(@D); \
> fi; \
> rm -rf $$backupdir; exit $$rc
> +endef
>
> -%.dvi: %.%TEXI-SUFFIX%
> - $(call am__texibuild_dvi_or_pdf,%AM_V_TEXI2DVI%,$(TEXI2DVI))
> -
> -%.pdf: %.%TEXI-SUFFIX%
> - $(call am__texibuild_dvi_or_pdf,%AM_V_TEXI2PDF%,$(TEXI2PDF))
> -
> -%.html: %.%TEXI-SUFFIX%
> +define am__texibuild_html
> %AM_V_MAKEINFO%$(am__ensure_target_dir_exists) \
> ## When --split (the default) is used, makeinfo will output a
> ## directory. However it will not update the time stamp of a
> @@ -92,3 +87,16 @@ endef
> rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
> exit 1; \
> fi
> +endef
> +
> +%.info: %.%TEXI-SUFFIX%
> + $(call am__texibuild_info,$(am__info_insrc))
> +
> +%.dvi: %.%TEXI-SUFFIX%
> + $(call am__texibuild_dvi_or_pdf,%AM_V_TEXI2DVI%,$(TEXI2DVI))
> +
> +%.pdf: %.%TEXI-SUFFIX%
> + $(call am__texibuild_dvi_or_pdf,%AM_V_TEXI2PDF%,$(TEXI2PDF))
> +
> +%.html: %.%TEXI-SUFFIX%
> + $(am__texibuild_html)
> --
> 1.7.9.5
>
>
- [Automake-NG] [PATCH 08/26] [ng] texi: reduce code duplication in texibuild.am, (continued)
[Automake-NG] [PATCH 09/26] [ng] texi: refactoring in texibuild.am, Stefano Lattarini, 2012/06/16
- Re: [Automake-NG] [PATCH 09/26] [ng] texi: refactoring in texibuild.am,
Akim Demaille <=
[Automake-NG] [PATCH 10/26] [ng] texi: reduce code duplication in output Makefile, Stefano Lattarini, 2012/06/16
[Automake-NG] [PATCH 11/26] [ng] texi: reorganize '.am' fragments a bit, Stefano Lattarini, 2012/06/16
[Automake-NG] [PATCH 12/26] [ng] texi: reorganize '.am' fragments even more, Stefano Lattarini, 2012/06/16
[Automake-NG] [PATCH 13/26] [ng] texi: drop transforms when reading texibuild.am, Stefano Lattarini, 2012/06/16