[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: DIST_COMMON broke
From: |
Derek R. Price |
Subject: |
Re: DIST_COMMON broke |
Date: |
Wed, 07 Feb 2001 19:04:46 -0500 |
Tom Tromey wrote:
> >>>>> "Derek" == Derek R Price <address@hidden> writes:
>
> Derek> Also, looking at this area of the code reminds me that I sent
> Derek> a, unfortunately largish, patch in something over a month ago
> Derek> that hasn't been reviewed to my knowledge. The patch was
> Derek> intended to fix a misplaced depcomp file (a bug which is still
> Derek> present in the current CVS Automake, I might add), but I had
> Derek> also ended up removing all the "special case '.'" bugs the code
> Derek> is littered with FIXME comments about (especially around the
> Derek> &require_file_* functions).
>
> Yeah, I still have a few of your patches sitting in my mailbox.
Well, when you get around to it, this one should take the place of my
last depcomp patch. I fixed tests/depcomp, tidied the ChangeLog based on
the standards and practices Raja & Akim made me aware of, and merged the
rest with the current CVS Autoconf.
ChangeLog entry:
* automake.in (require_file_with_conf_line,
require_file_with_line, require_file): Pass a @require_file_path
of $relative_dir instead of '.' to require_file_internal so that
all the special casing of '.' can be removed elsewhere.
(require_config_file, require_conf_file_with_line,
require_conf_file_with_conf_line): Remove special casing for '.'
and make sure $config_aux_dir is maintained properly.
(require_file_internal): Remove special casing of '.' and set
@require_file_path when missing files are added.
(maybe_push_required_file): Remove special casing of '.'
(handle_dependencies): Remove a workaround for a bug now fixed
and remove $config_aux_dir special casing.
(handle_configure): Remove special casing for $config_aux_dir
(handle_python): Ditto.
(yacc_lex_finish_helper): Change $config_aux_dir switch to
switch on the value of $config_aux_dir_set_in_configure_in.
(handle_texinfo): Ditto.
(scan_one_configure_file): Set $config_aux_dir and
$config_aux_dir_set_in_configure_in properly so special casing
on the value of $config_aux_dir can be removed elsewhere.
* tests/depcomp.test: New file.
* tests/confsub.test: Look for depcomp in $(top_srcdir) instead
of the
first subdir containing a C file.
* tests/libobj2.test: Ditto.
* tests/Makefile.am (TESTS): Added 'depcomp.test'.
Derek
--
Derek Price CVS Solutions Architect ( http://CVSHome.org )
mailto:address@hidden OpenAvenue ( http://OpenAvenue.com )
--
I will not aim for the head.
I will not aim for the head.
I will not aim for the head...
- Bart Simpson on chalkboard, _The Simpsons_
Index: ChangeLog
===================================================================
RCS file: /cvs/automake/automake/ChangeLog,v
retrieving revision 1.1001
diff -u -r1.1001 ChangeLog
--- ChangeLog 2001/02/07 21:51:39 1.1001
+++ ChangeLog 2001/02/07 23:27:58
@@ -522,6 +522,35 @@
* automake.in (handle_ltlibraries): Allow _LDFLAGS to be
conditionally defined. Fixes PR automake/77 and ldflags.test.
+2000-12-05 Derek Price <address@hidden>
+
+ * automake.in (require_file_with_conf_line,
+ require_file_with_line, require_file): Pass a @require_file_path
+ of $relative_dir instead of '.' to require_file_internal so that
+ all the special casing of '.' can be removed elsewhere.
+ (require_config_file, require_conf_file_with_line,
+ require_conf_file_with_conf_line): Remove special casing for '.'
+ and make sure $config_aux_dir is maintained properly.
+ (require_file_internal): Remove special casing of '.' and set
+ @require_file_path when missing files are added.
+ (maybe_push_required_file): Remove special casing of '.'
+ (handle_dependencies): Remove a workaround for a bug now fixed
+ and remove $config_aux_dir special casing.
+ (handle_configure): Remove special casing for $config_aux_dir
+ (handle_python): Ditto.
+ (yacc_lex_finish_helper): Change $config_aux_dir switch to
+ switch on the value of $config_aux_dir_set_in_configure_in.
+ (handle_texinfo): Ditto.
+ (scan_one_configure_file): Set $config_aux_dir and
+ $config_aux_dir_set_in_configure_in properly so special casing
+ on the value of $config_aux_dir can be removed elsewhere.
+
+ * tests/depcomp.test: New file.
+ * tests/confsub.test: Look for depcomp in $(top_srcdir) instead of the
+ first subdir containing a C file.
+ * tests/libobj2.test: Ditto.
+ * tests/Makefile.am (TESTS): Added 'depcomp.test'.
+
2000-11-25 Tom Tromey <address@hidden>
* automake.in (file_contents_with_transform): Added file name and
Index: automake.in
===================================================================
RCS file: /cvs/automake/automake/automake.in,v
retrieving revision 1.866
diff -u -r1.866 automake.in
--- automake.in 2001/02/07 21:15:05 1.866
+++ automake.in 2001/02/07 23:28:02
@@ -166,6 +166,7 @@
# can be set by AC_CONFIG_AUX_DIR.
@config_aux_path = ('.', '..', '../..');
$config_aux_dir = '';
+$config_aux_dir_set_in_configure_in = 0;
# Whether AC_PROG_MAKE_SET has been seen in configure.ac.
$seen_make_set = 0;
@@ -2267,14 +2268,14 @@
'mdate-sh');
local ($conf_dir);
- if ($config_aux_dir eq '.' || $config_aux_dir eq '')
+ if ($config_aux_dir_set_in_configure_in)
{
- $conf_dir = '$(srcdir)/';
+ $conf_dir = $config_aux_dir;
+ $conf_dir .= '/' unless $conf_dir =~ /\/$/;
}
else
{
- $conf_dir = $config_aux_dir;
- $conf_dir .= '/' unless $conf_dir =~ /\/$/;
+ $conf_dir = '$(srcdir)/';
}
$output_rules .=
&file_contents ('texi-vers',
@@ -2354,7 +2355,7 @@
&define_variable ('TEXINFO_TEX', "$texinfodir/texinfo.tex");
}
- elsif ($config_aux_dir ne '.' && $config_aux_dir ne '')
+ elsif ($config_aux_dir_set_in_configure_in)
{
$texinfodir = $config_aux_dir;
&define_variable ('TEXINFO_TEX', "$texinfodir/texinfo.tex");
@@ -2983,24 +2984,9 @@
# be empty.
if (&saw_sources_p (0) && keys %dep_files)
{
- local ($config_aux_dir_specified) = ($config_aux_dir ne '.'
- && $config_aux_dir ne '');
-
- # Set $require_file_found{'depcomp'} if the depcomp file exists,
- # before calling require_config_file on `depcomp'. This makes
- # require_file_internal skip its buggy existence test that would
- # make automake fail (with `required file `lib/depcomp' not found')
- # when AC_CONFIG_AUX_DIR is not set. See tests/subdir4.test.
- local ($depcomp_dir) = ($config_aux_dir_specified ? $config_aux_dir
- : '.');
- $require_file_found{'depcomp'} = 1 if -f "$depcomp_dir/depcomp";
-
# Set location of depcomp.
- local ($prefix) = ($config_aux_dir_specified ? $config_aux_dir
- : '$(top_srcdir)');
+ &define_variable ('depcomp', "\$(SHELL) $config_aux_dir/depcomp");
- &define_variable ('depcomp', "\$(SHELL) $prefix/depcomp");
-
&require_config_file ($FOREIGN, 'depcomp');
local ($iter);
@@ -3402,16 +3388,7 @@
}
# Set location of mkinstalldirs.
- if ($config_aux_dir ne '.' && $config_aux_dir ne '')
- {
- &define_variable ('mkinstalldirs', ('$(SHELL) ' . $config_aux_dir
- . '/mkinstalldirs'));
- }
- else
- {
- &define_variable ('mkinstalldirs',
- '$(SHELL) $(top_srcdir)/mkinstalldirs');
- }
+ &define_variable ('mkinstalldirs', ('$(SHELL) ' . $config_aux_dir .
'/mkinstalldirs'));
&am_line_error ('CONFIG_HEADER',
"\`CONFIG_HEADER' is an anachronism; now determined from
\`$configure_ac'")
@@ -4151,14 +4128,7 @@
&am_error ("\`python_PYTHON' defined but \`AM_CHECK_PYTHON' not in
\`$configure_ac'")
if ! $seen_pythondir && &variable_defined ('python_PYTHON');
- if ($config_aux_dir eq '.' || $config_aux_dir eq '')
- {
- &define_variable ('py_compile', '$(top_srcdir)/py-compile');
- }
- else
- {
- &define_variable ('py_compile', $config_aux_dir . '/py-compile');
- }
+ &define_variable ('py_compile', $config_aux_dir . '/py-compile');
}
# Handle Java.
@@ -4480,7 +4450,8 @@
if (/$AC_CONFIG_AUX_DIR_PATTERN/o)
{
- @config_aux_path = $1;
+ @config_aux_path = $config_aux_dir = $1;
+ $config_aux_dir_set_in_configure_in = 1;
}
# Check for ansi2knr.
@@ -5058,7 +5029,7 @@
# allow parallel builds to work correctly. FIXME: for now, no
# line number.
&require_config_file ($FOREIGN, 'ylwrap');
- if ($config_aux_dir ne '.' && $config_aux_dir ne '')
+ if ($config_aux_dir_set_in_configure_in)
{
&define_variable ('YLWRAP', $config_aux_dir . "/ylwrap");
}
@@ -7563,8 +7534,7 @@
{
local ($dir, $file, $fullfile) = @_;
- # FIXME: Once again, special-case `.'.
- if ($dir eq $relative_dir || $dir eq '.')
+ if ($dir eq $relative_dir)
{
&push_dist_common ($file);
}
@@ -7598,18 +7568,11 @@
$found_it = 0;
$dangling_sym = 0;
+
foreach $dir (@require_file_paths)
{
- if ($dir eq '.')
- {
- $fullfile = $relative_dir . "/" . $file;
- $errdir = $relative_dir unless $errdir;
- }
- else
- {
- $fullfile = $dir . "/" . $file;
- $errdir = $dir unless $errdir;
- }
+ $fullfile = $dir . "/" . $file;
+ $errdir = $dir unless $errdir;
# Use different name for "error filename". Otherwise on
# an error the bad file will be reported as eg
@@ -7640,7 +7603,7 @@
{
if ($strictness >= $mystrict)
{
- if ($dangling_sym && ($force_missing || $add_missing))
+ if ($dangling_sym && $add_missing)
{
unlink ($fullfile);
}
@@ -7693,6 +7656,9 @@
&maybe_push_required_file (&dirname ($errfile),
$file, $errfile);
+
+ # Prune the path list.
+ @require_file_paths = &dirname ($errfile);
}
local ($save) = $exit_status;
@@ -7716,19 +7682,19 @@
# configure.ac, not the current Makefile.am.
sub require_file_with_conf_line
{
- @require_file_paths = '.';
+ @require_file_paths = $relative_dir;
&require_file_internal (1, @_);
}
sub require_file_with_line
{
- @require_file_paths = '.';
+ @require_file_paths = $relative_dir;
&require_file_internal (0, @_);
}
sub require_file
{
- @require_file_paths = '.';
+ @require_file_paths = $relative_dir;
&require_file_internal (0, '', @_);
}
@@ -7740,14 +7706,8 @@
&require_file_internal (1, '', @_);
local ($dir) = $require_file_paths[0];
@config_aux_path = @require_file_paths;
- if ($dir eq '.')
- {
- $config_aux_dir = '.';
- }
- else
- {
- $config_aux_dir = '$(top_srcdir)/' . $dir;
- }
+ # avoid unsightly '/.'s.
+ $config_aux_dir = '$(top_srcdir)' . ($dir eq '.' ? "" : "/$dir");
}
# Assumes that the line number is in Makefile.am.
@@ -7757,14 +7717,8 @@
&require_file_internal (0, @_);
local ($dir) = $require_file_paths[0];
@config_aux_path = @require_file_paths;
- if ($dir eq '.')
- {
- $config_aux_dir = '.';
- }
- else
- {
- $config_aux_dir = '$(top_srcdir)/' . $dir;
- }
+ # avoid unsightly '/.'s.
+ $config_aux_dir = '$(top_srcdir)' . ($dir eq '.' ? "" : "/$dir");
}
# Assumes that the line number is in configure.ac.
@@ -7774,14 +7728,8 @@
&require_file_internal (1, @_);
local ($dir) = $require_file_paths[0];
@config_aux_path = @require_file_paths;
- if ($dir eq '.')
- {
- $config_aux_dir = '.';
- }
- else
- {
- $config_aux_dir = '$(top_srcdir)/' . $dir;
- }
+ # avoid unsightly '/.'s.
+ $config_aux_dir = '$(top_srcdir)' . ($dir eq '.' ? "" : "/$dir");
}
################################################################
Index: tests/Makefile.am
===================================================================
RCS file: /cvs/automake/automake/tests/Makefile.am,v
retrieving revision 1.253
diff -u -r1.253 tests/Makefile.am
--- tests/Makefile.am 2001/02/07 21:51:39 1.253
+++ tests/Makefile.am 2001/02/07 23:28:02
@@ -86,6 +86,7 @@
dejagnu.test \
depacl.test \
depacl2.test \
+depcomp.test \
depend.test \
depend3.test \
discover.test \
Index: tests/Makefile.in
===================================================================
RCS file: /cvs/automake/automake/tests/Makefile.in,v
retrieving revision 1.322
diff -u -r1.322 tests/Makefile.in
--- tests/Makefile.in 2001/02/07 21:51:39 1.322
+++ tests/Makefile.in 2001/02/07 23:28:02
@@ -156,6 +156,7 @@
dejagnu.test \
depacl.test \
depacl2.test \
+depcomp.test \
depend.test \
depend3.test \
discover.test \
Index: tests/confsub.test
===================================================================
RCS file: /cvs/automake/automake/tests/confsub.test,v
retrieving revision 1.9
diff -u -r1.9 tests/confsub.test
--- tests/confsub.test 2000/03/19 23:38:10 1.9
+++ tests/confsub.test 2001/02/07 23:28:03
@@ -27,8 +27,6 @@
: > subdir/config.h.in
-mv depcomp subdir
-
$AUTOMAKE || exit 1
# Make sure subdir Makefile.in doesn't itself look in the subdir.
Index: tests/depcomp.test
===================================================================
RCS file: depcomp.test
diff -N tests/depcomp.test
--- /dev/null Tue May 5 13:32:27 1998
+++ tests/depcomp.test Wed Feb 7 15:28:03 2001
@@ -0,0 +1,34 @@
+#! /bin/sh
+
+# Test to make sure depcomp is installed and found properly
+# when required for multiple directories
+
+. $srcdir/defs || exit 1
+
+cat > configure.in << 'END'
+AM_INIT_AUTOMAKE(nonesuch, nonesuch)
+PACKAGE=nonesuch
+VERSION=nonesuch
+AC_PROG_CC
+AC_OUTPUT(subdir/Makefile subdir2/Makefile)
+END
+
+rm depcomp
+mkdir subdir
+mkdir subdir2
+
+cat > subdir/Makefile.am << 'END'
+noinst_PROGRAMS = foo
+foo_SOURCES = foo.c
+END
+
+cp subdir/Makefile.am subdir2/Makefile.am
+
+: > subdir/foo.c
+: > subdir2/foo.c
+
+$AUTOMAKE --add-missing || exit 1
+
+# There used to be a bug where this was created in the first subdir with C
+# sources in it instead of in $top_srcdir or $ac_auxdir
+test -f depcomp || exit 1
Index: tests/libobj2.test
===================================================================
RCS file: /cvs/automake/automake/tests/libobj2.test,v
retrieving revision 1.8
diff -u -r1.8 tests/libobj2.test
--- tests/libobj2.test 2000/03/19 23:38:10 1.8
+++ tests/libobj2.test 2001/02/07 23:28:03
@@ -28,8 +28,6 @@
: > subdir/fsusage.c
-mv depcomp subdir
-
$AUTOMAKE || exit 1
grep 'fsusage\.c' subdir/Makefile.in
- Re: DIST_COMMON broke, (continued)
- Re: DIST_COMMON broke, Pavel Roskin, 2001/02/07
- Re: DIST_COMMON broke, Tom Tromey, 2001/02/07
- Re: DIST_COMMON broke, Derek R. Price, 2001/02/07
- Re: DIST_COMMON broke, Tom Tromey, 2001/02/07
- Re: DIST_COMMON broke, Derek R. Price, 2001/02/07
- Re: DIST_COMMON broke, Tom Tromey, 2001/02/07
- Re: DIST_COMMON broke, Derek R. Price, 2001/02/07
- Re: DIST_COMMON broke, Derek R. Price, 2001/02/07
- Re: DIST_COMMON broke, Tom Tromey, 2001/02/07
- Re: DIST_COMMON broke, Derek R. Price, 2001/02/07
- Re: DIST_COMMON broke,
Derek R. Price <=