Re: [avrdude-dev] Avr910 programmer

[Theodore A. Roth]

On Sun, 27 Apr 2003, Alexander Peter wrote:

:)I tried to get a connection between my prototype board and my PC via the
:)avr910 programmer and avrdude 4.1.0 but the connection failed.
:)
:)My avr910 contains software version avr910-22.asm and avrdude reports
:)(correctly) supported devices are ... 0x68 .... .
:)0x68 = At90S8535 thats the chip I want to see in terminalmode with
:)avrdude -p 8535 -c avr910 -t
:)
:)The complete log is:
:)
:)C:\WinAVR>AVRDUDE -p 8535 -c avr910 -t
:)
:)Found programmer: Id = "AVR ISP"; type = S
:)    Software Version = 2.2; Hardware Version = a.`
:)Programmer supports auto addr increment.
:)
:)Programmer supports the following devices:
:)    Device code: 0x55
:)    Device code: 0x56
:)    Device code: 0x13
:)    Device code: 0x20
:)    Device code: 0x28
:)    Device code: 0x38
:)    Device code: 0x48
:)    Device code: 0x4c
:)    Device code: 0x34
:)    Device code: 0x30
:)    Device code: 0x6c
:)    Device code: 0x68
:)    Device code: 0x65
:)    Device code: 0x60
:)    Device code: 0x64
:)    Device code: 0x41
:)    Device code: 0x42
:)
:)AVRDUDE: error: selected device is not supported by programmer: 8535
:)
:)
:)What's wrong? Are there major changes from avr910-22.asm to avr910-23.asm?


Can you send me the following:

  - the firmware asm you are using (the 2.2 file)

  - an output dump using the "-v -v -v -v" options (need the -v 4 times to 
    get a very verbose dump of the serial data stream between avrdude and
    the avr910 programmer)

Ted Roth