Re: [avrdude-dev] Programming problems with RH7.3 and STK500

[Brian Dean]

On Mon, Sep 01, 2003 at 12:45:16PM -0700, Goran Pufler wrote:

> address@hidden raf]# avrdude -p m128 -c STK500 -P /dev/ttyS1 -i gcctest1.hex
> avrdude: AVR device initialized and ready to accept instructions
> avrdude: Device signature = 0x1e9702
> avrdude: reading input file "gcctest1.hex"
> avrdude: input file gcctest1.hex auto detected as Intel Hex
> avrdude: writing flash (254 bytes):
> avrdude: 256 bytes of flash written
> avrdude: verifying flash memory against gcctest1.hex:
> avrdude: reading on-chip flash data:
> avrdude: verifying ...
> avrdude: verification error, first mismatch at byte 0x0001
>          0x94 != 0x80
> avrdude: verification error; content mismatch

Try adding the '-e' option to erase the flash first.

Cheers,
-Brian
-- 
Brian Dean
address@hidden
http://www.bsdhome.com/
http://www.bdmicro.com/