[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [avrdude-dev] ATTINY88
|
From: |
Allan Macdonald |
|
Subject: |
Re: [avrdude-dev] ATTINY88 |
|
Date: |
Thu, 12 Feb 2009 17:20:18 -0400 |
Hello folks,
Thanks to all who replied, especially Bob! I was able to successfully use his
part description, with a few minor changes to make things a little
easier for me. See below for diffs.
Cheers,
Allan
***********************
Diff output:
***********************
--- attiny88_orig.conf Thu Feb 12 15:50:19 2009
+++ attiny88_fixed.conf Thu Feb 12 15:54:54 2009
@@ -4,7 +4,7 @@
part
id = "t88";
- desc = "ATtiny88";
+ desc = "attiny88";
has_debugwire = yes;
flash_instr = 0xB6, 0x01, 0x11;
eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00,
@@ -154,10 +154,9 @@
min_write_delay = 4500;
max_write_delay = 4500;
read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
- "x x x x x x x x x x x x x o o o";
-
+ "x x x x x x x x o o o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
- "x x x x x x x x x x x x x i i i";
+ "x x x x x x x x x x x x x x x i";
;
memory "lock"
***********************
On Thu, Feb 12, 2009 at 12:49 PM, Bob Paddock <snip> wrote:
> On Thu, Feb 12, 2009 at 10:32 AM, Allan Macdonald
> <snip> wrote:
>
>> I have a quick question: has anyone already created a part description
>> for the ATTINY88?
>
> Give this a shot, no smoke came out of my board at least when I just tried
> this.
> Doesn't exactly match the datasheet, but I'm not even sure the part has
> ever read it.
>
> #------------------------------------------------------------
> # ATtiny88
> #------------------------------------------------------------
>
> part
> id = "t88";
> desc = "ATtiny88";
> has_debugwire = yes;
> flash_instr = 0xB6, 0x01, 0x11;
> eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00,
> 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF,
> 0x99, 0xF9, 0xBB, 0xAF;
> stk500_devcode = 0x73;
> # avr910_devcode = 0x;
> signature = 0x1e 0x93 0x11;
> pagel = 0xd7;
> bs2 = 0xc2;
> chip_erase_delay = 9000;
> pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
> "x x x x x x x x x x x x x x x x";
>
> chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x",
> "x x x x x x x x x x x x x x x x";
>
> timeout = 200;
> stabdelay = 100;
> cmdexedelay = 25;
> synchloops = 32;
> bytedelay = 0;
> pollindex = 3;
> pollvalue = 0x53;
> predelay = 1;
> postdelay = 1;
> pollmethod = 1;
>
> pp_controlstack =
> 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F,
> 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F,
> 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B,
> 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
> hventerstabdelay = 100;
> progmodedelay = 0;
> latchcycles = 5;
> togglevtg = 1;
> poweroffdelay = 15;
> resetdelayms = 1;
> resetdelayus = 0;
> hvleavestabdelay = 15;
> resetdelay = 15;
> chiperasepulsewidth = 0;
> chiperasepolltimeout = 10;
> programfusepulsewidth = 0;
> programfusepolltimeout = 5;
> programlockpulsewidth = 0;
> programlockpolltimeout = 5;
>
> memory "eeprom"
> paged = no;
> page_size = 4;
> size = 512;
> min_write_delay = 3600;
> max_write_delay = 3600;
> readback_p1 = 0xff;
> readback_p2 = 0xff;
> read = " 1 0 1 0 0 0 0 0",
> " 0 0 0 x x x x a8",
> " a7 a6 a5 a4 a3 a2 a1 a0",
> " o o o o o o o o";
>
> write = " 1 1 0 0 0 0 0 0",
> " 0 0 0 x x x x a8",
> " a7 a6 a5 a4 a3 a2 a1 a0",
> " i i i i i i i i";
>
> loadpage_lo = " 1 1 0 0 0 0 0 1",
> " 0 0 0 0 0 0 0 0",
> " 0 0 0 0 0 0 a1 a0",
> " i i i i i i i i";
>
> writepage = " 1 1 0 0 0 0 1 0",
> " 0 0 x x x x x a8",
> " a7 a6 a5 a4 a3 a2 0 0",
> " x x x x x x x x";
>
> mode = 0x41;
> delay = 5;
> blocksize = 4;
> readsize = 256;
> ;
> memory "flash"
> paged = yes;
> size = 8192;
> page_size = 64;
> num_pages = 128;
> min_write_delay = 4500;
> max_write_delay = 4500;
> readback_p1 = 0xff;
> readback_p2 = 0xff;
> read_lo = " 0 0 1 0 0 0 0 0",
> " 0 0 0 0 a11 a10 a9 a8",
> " a7 a6 a5 a4 a3 a2 a1 a0",
> " o o o o o o o o";
>
> read_hi = " 0 0 1 0 1 0 0 0",
> " 0 0 0 0 a11 a10 a9 a8",
> " a7 a6 a5 a4 a3 a2 a1 a0",
> " o o o o o o o o";
>
> loadpage_lo = " 0 1 0 0 0 0 0 0",
> " 0 0 0 x x x x x",
> " x x x a4 a3 a2 a1 a0",
> " i i i i i i i i";
>
> loadpage_hi = " 0 1 0 0 1 0 0 0",
> " 0 0 0 x x x x x",
> " x x x a4 a3 a2 a1 a0",
> " i i i i i i i i";
>
> writepage = " 0 1 0 0 1 1 0 0",
> " 0 0 0 0 a11 a10 a9 a8",
> " a7 a6 a5 x x x x x",
> " x x x x x x x x";
>
> mode = 0x41;
> delay = 6;
> blocksize = 64;
> readsize = 256;
> ;
>
> memory "lfuse"
> size = 1;
> min_write_delay = 4500;
> max_write_delay = 4500;
> read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
> "x x x x x x x x o o o o o o o o";
>
> write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
> "x x x x x x x x i i i i i i i i";
> ;
>
> memory "hfuse"
> size = 1;
> min_write_delay = 4500;
> max_write_delay = 4500;
> read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
> "x x x x x x x x o o o o o o o o";
>
> write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
> "x x x x x x x x i i i i i i i i";
> ;
>
> memory "efuse"
> size = 1;
> min_write_delay = 4500;
> max_write_delay = 4500;
> read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
> "x x x x x x x x x x x x x o o o";
>
> write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
> "x x x x x x x x x x x x x i i i";
> ;
>
> memory "lock"
> size = 1;
> min_write_delay = 4500;
> max_write_delay = 4500;
> read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
> "x x x x x x x x x x o o o o o o";
>
> write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
> "x x x x x x x x 1 1 i i i i i i";
> ;
>
> memory "calibration"
> size = 1;
> read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x",
> "0 0 0 0 0 0 0 0 o o o o o o o o";
> ;
>
> memory "signature"
> size = 3;
> read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x",
> "x x x x x x a1 a0 o o o o o o o o";
> ;
> ;
>