[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[avrdude-dev] avarice - cannot sync
From: |
Vandra Ákos |
Subject: |
[avrdude-dev] avarice - cannot sync |
Date: |
Mon, 18 Jan 2010 00:30:03 +0100 |
User-agent: |
Thunderbird 2.0.0.23 (X11/20090817) |
Hi! I tried setting up avarice, but it says it cannot sync... I have a
JTAG clone, that works well from AVR studio, but only at 19200bps.
Avarice is first trying to connect at 115200, maybe that screws up
communication... Is there a way to tell avarice to connect only at 19200?
address@hidden:~/projects/AVR/szekrenyzar$ avarice -d -j /dev/ttyUSB0 -1 -B250
AVaRICE version 2.9, Sep 19 2009 01:30:44
JTAG config starting.
Attempting synchronisation at bitrate 115200
command[S, 1]: 53 45 20 20
Out of sync, reponse was `e0'
command[S, 1]: 53 20 20
Out of sync, reponse was `e0'
command[S, 2]: 53 45 20 20
Out of sync, reponse was `e0'
command[S, 1]: 53 20 20
Out of sync, reponse was `e0'
command[S, 3]: 53 45 20 20
Out of sync, reponse was `e0'
command[S, 1]: 53 20 20
Out of sync, reponse was `e0'
Attempting synchronisation at bitrate 19200
command[S, 1]: 53 45 20 20
command[S, 1]: 53 20 20
response: 41 56 52 4E 4F 43 44 41
command[B, 1]: 42 62 FF 20 20
response: 41
command[q, 1]: 71 7A 20 20
Out of sync, reponse was `e0'
command[ , 2]: 20
Out of sync, reponse was `e0'
command[ , 3]: 20
Out of sync, reponse was `e0'
command[ , 4]: 20
Out of sync, reponse was `e0'
command[ , 5]: 20
Out of sync, reponse was `e0'
command[ , 6]: 20
Out of sync, reponse was `e0'
command[ , 7]: 20
Out of sync, reponse was `e0'
command[ , 8]: 20
Out of sync, reponse was `e0'
command[ , 9]: 20
Out of sync, reponse was `e0'
command[ , 10]: 20
Out of sync, reponse was `e0'
JTAG ICE: Cannot synchronise
Can anyone help me out?
Regards,
Vandra Ákos
- [avrdude-dev] avarice - cannot sync,
Vandra Ákos <=