[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[avrdude-dev] atmega48pa support
|
From: |
Simon Kirby |
|
Subject: |
[avrdude-dev] atmega48pa support |
|
Date: |
Tue, 8 May 2012 00:41:36 -0700 |
|
User-agent: |
Mutt/1.5.20 (2009-06-14) |
I had to add support in avrdude.conf for the ATmega48PA to reflash a
xwusbasp board with it. I copy-paste-changed the following to make it
work with the dragon. Warning: Unsure about stk500, etc., constants.
This is a mostly blind copy of the ATmega48P with the signature bytes
changed.
Cheers,
Simon-
diff --git a/avrdude.conf.orig b/avrdude.conf
index bb785ab..0527eae 100644
--- a/avrdude.conf.orig
+++ b/avrdude.conf
@@ -8293,6 +8293,188 @@ part
;
;
+part
+ id = "m48pa";
+ desc = "ATMEGA48PA";
+ has_debugwire = yes;
+ flash_instr = 0xB6, 0x01, 0x11;
+ eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00,
+ 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF,
+ 0x99, 0xF9, 0xBB, 0xAF;
+ stk500_devcode = 0x59;
+# avr910_devcode = 0x;
+ signature = 0x1e 0x92 0x0a;
+ pagel = 0xd7;
+ bs2 = 0xc2;
+ chip_erase_delay = 45000;
+ pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
+ "x x x x x x x x x x x x x x x x";
+
+ chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x",
+ "x x x x x x x x x x x x x x x x";
+
+ timeout = 200;
+ stabdelay = 100;
+ cmdexedelay = 25;
+ synchloops = 32;
+ bytedelay = 0;
+ pollindex = 3;
+ pollvalue = 0x53;
+ predelay = 1;
+ postdelay = 1;
+ pollmethod = 1;
+
+ pp_controlstack =
+ 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F,
+ 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F,
+ 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B,
+ 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
+ hventerstabdelay = 100;
+ progmodedelay = 0;
+ latchcycles = 5;
+ togglevtg = 1;
+ poweroffdelay = 15;
+ resetdelayms = 1;
+ resetdelayus = 0;
+ hvleavestabdelay = 15;
+ resetdelay = 15;
+ chiperasepulsewidth = 0;
+ chiperasepolltimeout = 10;
+ programfusepulsewidth = 0;
+ programfusepolltimeout = 5;
+ programlockpulsewidth = 0;
+ programlockpolltimeout = 5;
+
+ memory "eeprom"
+ paged = no;
+ page_size = 4;
+ size = 256;
+ min_write_delay = 3600;
+ max_write_delay = 3600;
+ readback_p1 = 0xff;
+ readback_p2 = 0xff;
+ read = " 1 0 1 0 0 0 0 0",
+ " 0 0 0 x x x x x",
+ " a7 a6 a5 a4 a3 a2 a1 a0",
+ " o o o o o o o o";
+
+ write = " 1 1 0 0 0 0 0 0",
+ " 0 0 0 x x x x x",
+ " a7 a6 a5 a4 a3 a2 a1 a0",
+ " i i i i i i i i";
+
+ loadpage_lo = " 1 1 0 0 0 0 0 1",
+ " 0 0 0 0 0 0 0 0",
+ " 0 0 0 0 0 0 a1 a0",
+ " i i i i i i i i";
+
+ writepage = " 1 1 0 0 0 0 1 0",
+ " 0 0 x x x x x x",
+ " a7 a6 a5 a4 a3 a2 0 0",
+ " x x x x x x x x";
+
+ mode = 0x41;
+ delay = 20;
+ blocksize = 4;
+ readsize = 256;
+ ;
+ memory "flash"
+ paged = yes;
+ size = 4096;
+ page_size = 64;
+ num_pages = 64;
+ min_write_delay = 4500;
+ max_write_delay = 4500;
+ readback_p1 = 0x00;
+ readback_p2 = 0x00;
+ read_lo = " 0 0 1 0 0 0 0 0",
+ " 0 0 0 0 0 a10 a9 a8",
+ " a7 a6 a5 a4 a3 a2 a1 a0",
+ " o o o o o o o o";
+
+ read_hi = " 0 0 1 0 1 0 0 0",
+ " 0 0 0 0 0 a10 a9 a8",
+ " a7 a6 a5 a4 a3 a2 a1 a0",
+ " o o o o o o o o";
+
+ loadpage_lo = " 0 1 0 0 0 0 0 0",
+ " 0 0 0 x x x x x",
+ " x x x a4 a3 a2 a1 a0",
+ " i i i i i i i i";
+
+ loadpage_hi = " 0 1 0 0 1 0 0 0",
+ " 0 0 0 x x x x x",
+ " x x x a4 a3 a2 a1 a0",
+ " i i i i i i i i";
+
+ writepage = " 0 1 0 0 1 1 0 0",
+ " 0 0 0 0 0 a10 a9 a8",
+ " a7 a6 a5 x x x x x",
+ " x x x x x x x x";
+
+ mode = 0x41;
+ delay = 6;
+ blocksize = 64;
+ readsize = 256;
+ ;
+
+ memory "lfuse"
+ size = 1;
+ min_write_delay = 4500;
+ max_write_delay = 4500;
+ read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
+ "x x x x x x x x o o o o o o o o";
+
+ write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
+ "x x x x x x x x i i i i i i i i";
+ ;
+
+ memory "hfuse"
+ size = 1;
+ min_write_delay = 4500;
+ max_write_delay = 4500;
+ read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
+ "x x x x x x x x o o o o o o o o";
+
+ write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
+ "x x x x x x x x i i i i i i i i";
+ ;
+
+ memory "efuse"
+ size = 1;
+ min_write_delay = 4500;
+ max_write_delay = 4500;
+ read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
+ "x x x x x x x x x x x x x x x o";
+
+ write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
+ "x x x x x x x x x x x x x x x i";
+ ;
+
+ memory "lock"
+ size = 1;
+ min_write_delay = 4500;
+ max_write_delay = 4500;
+ read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
+ "x x x x x x x x x x o o o o o o";
+
+ write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
+ "x x x x x x x x 1 1 i i i i i i";
+ ;
+
+ memory "calibration"
+ size = 1;
+ read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x",
+ "0 0 0 0 0 0 0 0 o o o o o o o o";
+ ;
+
+ memory "signature"
+ size = 3;
+ read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x",
+ "x x x x x x a1 a0 o o o o o o o o";
+ ;
+ ;
+
#------------------------------------------------------------
# ATmega88
- [avrdude-dev] atmega48pa support,
Simon Kirby <=