Re: [avrdude-dev] Remote programming

[René Liebscher]

   Hi,
   in the online documentation of avrdude you find
   ([1]http://www.nongnu.org/avrdude/user-manual/avrdude_4.html#Option-Des
   criptions):
   ------------------
   -P port

   Use port to identify the device to which the programmer is attached.
   Normally, the default parallel port is used, but if the programmer type
   normally connects to the serial port, the default serial port will be
   used. See Appendix A, Platform Dependent Information, to find out the
   default port names for your platform. If you need to use a different
   parallel or serial port, use this option to specify the alternate port
   name.
   ...

   For programmers that attach to a serial port using some kind of higher
   level protocol (as opposed to bit-bang style programmers), port can be
   specified as net:host:port. In this case, instead of trying to open a
   local device, a TCP network connection to (TCP) porton host is
   established. The remote endpoint is assumed to be a terminal or console
   server that connects the network stream to a local serial port where
   the actual programmer has been attached to. The port is assumed to be
   properly configured, for example using a transparent 8-bit data
   connection without parity at 115200 Baud for a STK500.

   This feature is currently not implemented for Win32 systems.
   ------------------
   Did you already try this?
   Kind regards
   Rene
   Am 17.02.2013 18:25, schrieb "Ing. Daniel Rozsnyo":

     Is there any way to realise a remote programming with avrdude?
     Use case: our AVR device with a bootloader (emulating a programmer)
     will be connected to an ethernet-to-serial converter (well, one
     which operates over cellular network), so on the server side I need
     to connect to a specific TCP port with avrdude, instead of
     /dev/ttySx or ttyUSBx.
     Does anybody want to get sponsored for creating such a patch?
     Or would something like remserial be better?
     [2]http://lpccomp.bc.ca/remserial/
     Thanks,
     Daniel
     _______________________________________________
     avrdude-dev mailing list
     address@hidden
     [4]https://lists.nongnu.org/mailman/listinfo/avrdude-dev

References

   1. 
http://www.nongnu.org/avrdude/user-manual/avrdude_4.html#Option-Descriptions
   2. http://lpccomp.bc.ca/remserial/
   3. mailto:address@hidden
   4. https://lists.nongnu.org/mailman/listinfo/avrdude-dev