Re: [Discuss-gnuradio] E320 Network Mode TX on both channels

[Nate Temple]

Hi David,

This sounds like it might be a bug with the E320. Can you email us at address@hidden and we can debug the issue through that channel?

Regards,

Nate Temple

On Tue, Oct 15, 2019 at 12:37 PM David Stockton (CTR) <address@hidden> wrote:

have gnuradio companion 3.7.13.5 (UHD_3.14.1.HEAD-0-g5491b80e)

loaded  UHD_3.14.1.0-0-g0d934195 firmware on the e320

downloaded and installed the FPGA for network mode on the e320

created a simple grc flow.  2 signal source (cosine) each going to a channel on the UHD: USRP Sink  (Mb0 Subdev A:0 and A:1)

when it runs both transmit lights come on, but i only see one freq transmitted on my speca.  i can get either freq to transmit out of either port, but never at the same time.

is this a limitation of grc or the e320? 

i had tried a similar setup with a e310 in embedded mode with the same results.

David Stockton (CTR)

719.554.4219

_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio