[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Freeipmi-devel] ipmi_monitoring_sensor_readings_by_record_id:intern

From: Al Chu
Subject: Re: [Freeipmi-devel] ipmi_monitoring_sensor_readings_by_record_id:internal IPMI error
Date: Tue, 26 Aug 2008 13:40:46 -0700

Hey David,

Are you using the newest FreeIPMI available?  0.6.5 from the FreeIPMI
homepage?  The debug dump data you've given me seems pretty out of date.
I've changed the formatting + the amount of information that gets

[ VALUE               TAG NAME:LENGTH                          ]
[              2Dh] = cmd[ 8b]
[              CBh] = comp_code[ 8b]
(ipmi_monitoring_sensor_reading.c, _get_sensor_reading, 404): bad
completion code: 0x51
ipmi_monitoring_sensor_readings_by_record_id: internal IPMI error

Another user w/ a Dell machine hit sensors that returned 0xCB ==
"Requested Sensor, data, or record not present".  This fix seems to be
in the FreeIPMI 0.6.5 release.

On another note, there are several sensors on your motherboard that
ipmimonitoring currently does not interpret.  I will add those into


On Tue, 2008-08-26 at 12:05 -0700, David Sparks wrote:
> Al Chu wrote:
> > Hey David,
> > 
> > On another note.  There are a lot of "Unknown" sensors listed below.
> > Typically "Unknown" is shown b/c there are sensor reading errors on
> the
> > remote motherboard.  But the below is just way too many to look
> > reasonable.  Could you also send the --debug output of ipmi-sensors
> to
> > me?
> Will do!  Output is attached, I put stdout and stderr into separate
> files 
> instead of interleaving the output.
> The server the commands are from is a Dell 1850.
Albert Chu
Computer Scientist
High Performance Systems Division
Lawrence Livermore National Laboratory

reply via email to

[Prev in Thread] Current Thread [Next in Thread]