[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Freeipmi-devel] Can't read CPU OEM Sensor Supermicro X8SIL-F
From: |
vitamin.b |
Subject: |
[Freeipmi-devel] Can't read CPU OEM Sensor Supermicro X8SIL-F |
Date: |
Mon, 11 Jul 2011 10:45:47 +0200 |
Hello,
i need some help on reading the cpu sensor from this hardware:
Mainboard: Supermicro X8SIL-F Rev. 1.02
CPU: Intel Xeon L3406
uname -a
bmc-info
ipmi-sensors -V
ipmi-sensors --flush-cache
ipmi-sensors --interpret-oem-data --output-sensor-state
ipmi-sensors --interpret-oem-data --output-sensor-state
--ignore-not-available-sensors
ipmi-sensors --interpret-oem-data --output-sensor-state -v --record-ids=71
$ uname -a
Linux vidar 2.6.38-bpo.2-amd64 #1 SMP Mon Jun 6 15:24:02 UTC 2011 x86_64
GNU/Linux
$ bmc-info
Device ID : 32
Device Revision : 1
Device SDRs : unsupported
Firmware Revision : 2.50
Device Available : yes (normal operation)
IPMI Version : 2.0
Sensor Device : supported
SDR Repository Device : supported
SEL Device : supported
FRU Inventory Device : supported
IPMB Event Receiver : supported
IPMB Event Generator : supported
Bridge : unsupported
Chassis Device : supported
Manufacturer ID : Super Micro Computer Inc. (47488)
Product ID : 1541
GUID : 00000000-0000-0000-0000-000000000000
Channel Information
Channel Number : 0
Medium Type : IPMB (I2C)
Protocol Type : IPMB-1.0
Active Session Count : 0
Session Support : session-less
Vendor ID : Intelligent Platform Management Interface forum (7154)
Channel Number : 1
Medium Type : 802.3 LAN
Protocol Type : IPMB-1.0
Active Session Count : 0
Session Support : multi-session
Vendor ID : Intelligent Platform Management Interface forum (7154)
Channel Number : 3
Medium Type : Asynch. Serial/Modem (RS-232)
Protocol Type : IPMB-1.0
Active Session Count : 0
Session Support : single-session
Vendor ID : Intelligent Platform Management Interface forum (7154)
Channel Number : 5
Medium Type : IPMB (I2C)
Protocol Type : IPMB-1.0
Active Session Count : 0
Session Support : session-less
Vendor ID : Intelligent Platform Management Interface forum (7154)
$ ipmi-sensors -V
ipmi-sensors - 1.0.5
Copyright (C) 2003-2010 FreeIPMI Core Team
This program is free software; you may redistribute it under the terms of
the GNU General Public License. This program has absolutely no warranty.
$ ipmi-sensors --flush-cache
Flushing cache: /root/.freeipmi/sdr-cache/sdr-cache-vidar.localhost
$ ipmi-sensors --interpret-oem-data --output-sensor-state
Caching SDR repository information:
/root/.freeipmi/sdr-cache/sdr-cache-vidar.localhost
Caching SDR record 25 of 25 (current record ID 1612)
ID | Name | Type | State | Reading | Units | Event
4 | System Temp | Temperature | Nominal | 55.00 | C | 'OK'
71 | CPU Temp | OEM Reserved | N/A | N/A | N/A | 'OEM
Event = 0000h'
138 | FAN 1 | Fan | Nominal | 1325.00 | RPM | 'OK'
205 | FAN 2 | Fan | N/A | N/A | RPM | N/A
272 | FAN 3 | Fan | Nominal | 1140.00 | RPM | 'OK'
339 | FAN 4 | Fan | Nominal | 1140.00 | RPM | 'OK'
406 | FAN 5 | Fan | Nominal | 1325.00 | RPM | 'OK'
473 | CPU Vcore | Voltage | Nominal | 0.90 | V | 'OK'
540 | +3.3VCC | Voltage | Nominal | 3.26 | V | 'OK'
607 | +12 V | Voltage | Nominal | 12.14 | V | 'OK'
674 | CPU DIMM | Voltage | Nominal | 1.52 | V | 'OK'
741 | +5 V | Voltage | Nominal | 5.09 | V | 'OK'
808 | -12 V | Voltage | Nominal | -12.48 | V | 'OK'
875 | VBAT | Voltage | Nominal | 3.14 | V | 'OK'
942 | +3.3VSB | Voltage | Nominal | 3.25 | V | 'OK'
1009 | AVCC | Voltage | Nominal | 3.26 | V | 'OK'
1076 | Chassis Intru | Physical Security | Nominal | N/A | N/A | 'OK'
1143 | PS Status | Power Supply | N/A | N/A | N/A |
'Presence detected' 'Unrecognized Event = 0100h' 'Unrecognized Event = 0200h'
'Unrecognized Event = 0400h' 'Unrecognized Event = 0800h' 'Unrecognized Event =
1000h' 'Unrecognized Event = 2000h' 'Unrecognized Event = 4000h'
$ ipmi-sensors --interpret-oem-data --output-sensor-state
--ignore-not-available-sensors
ID | Name | Type | State | Reading | Units | Event
4 | System Temp | Temperature | Nominal | 55.00 | C | 'OK'
71 | CPU Temp | OEM Reserved | N/A | N/A | N/A | 'OEM
Event = 0000h'
138 | FAN 1 | Fan | Nominal | 1325.00 | RPM | 'OK'
272 | FAN 3 | Fan | Nominal | 1140.00 | RPM | 'OK'
339 | FAN 4 | Fan | Nominal | 1140.00 | RPM | 'OK'
406 | FAN 5 | Fan | Nominal | 1510.00 | RPM | 'OK'
473 | CPU Vcore | Voltage | Nominal | 0.90 | V | 'OK'
540 | +3.3VCC | Voltage | Nominal | 3.26 | V | 'OK'
607 | +12 V | Voltage | Nominal | 12.14 | V | 'OK'
674 | CPU DIMM | Voltage | Nominal | 1.53 | V | 'OK'
741 | +5 V | Voltage | Nominal | 5.09 | V | 'OK'
808 | -12 V | Voltage | Nominal | -12.48 | V | 'OK'
875 | VBAT | Voltage | Nominal | 3.14 | V | 'OK'
942 | +3.3VSB | Voltage | Nominal | 3.25 | V | 'OK'
1009 | AVCC | Voltage | Nominal | 3.26 | V | 'OK'
1076 | Chassis Intru | Physical Security | Nominal | N/A | N/A | 'OK'
1143 | PS Status | Power Supply | N/A | N/A | N/A |
'Presence detected' 'Unrecognized Event = 0100h' 'Unrecognized Event = 0200h'
'Unrecognized Event = 0400h' 'Unrecognized Event = 0800h' 'Unrecognized Event =
1000h' 'Unrecognized Event = 2000h' 'Unrecognized Event = 4000h'
$ ipmi-sensors --interpret-oem-data --output-sensor-state -v --record-ids=71
Record ID: 71
ID String: CPU Temp
Sensor Type: OEM Reserved (C0h)
Sensor Number: 18
IPMB Slave Address: 10h
Sensor Owner ID: 20h
Sensor Owner LUN: 0h
Channel Number: 0h
Entity ID: processor (3)
Entity Instance: 1
Entity Instance Type: Physical Entity
Event/Reading Type Code: 70h
Sensor State: N/A
Sensor Event: 'OEM Event = 0000h'
best regards
David
- [Freeipmi-devel] Can't read CPU OEM Sensor Supermicro X8SIL-F,
vitamin.b <=