[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Freeipmi-devel] Can't read CPU OEM Sensor Supermicro X8SIL-F
|
From: |
Al Chu |
|
Subject: |
Re: [Freeipmi-devel] Can't read CPU OEM Sensor Supermicro X8SIL-F |
|
Date: |
Mon, 11 Jul 2011 10:59:11 -0700 |
Hi David,
It seems to be like all the other Supermicro CPU OEM sensors, so I can
just add the interpretation support in for you. I'll get a beta tar.gz
to you to try.
BTW,
> 1143 | PS Status | Power Supply | N/A | N/A | N/A
| 'Presence detected' 'Unrecognized Event = 0100h' 'Unrecognized Event =
0200h' 'Unrecognized Event = 0400h' 'Unrecognized Event = 0800h'
'Unrecognized Event = 1000h' 'Unrecognized Event = 2000h' 'Unrecognized
Event = 4000h'
You can cleanup this messy output w/ the --ignore-unrecognized-events option.
(I reported this issue to Supermicro awhile back).
Al
On Mon, 2011-07-11 at 01:45 -0700, vitamin.b wrote:
> Hello,
>
> i need some help on reading the cpu sensor from this hardware:
> Mainboard: Supermicro X8SIL-F Rev. 1.02
> CPU: Intel Xeon L3406
>
>
> uname -a
> bmc-info
> ipmi-sensors -V
> ipmi-sensors --flush-cache
> ipmi-sensors --interpret-oem-data --output-sensor-state
> ipmi-sensors --interpret-oem-data --output-sensor-state
> --ignore-not-available-sensors
> ipmi-sensors --interpret-oem-data --output-sensor-state -v --record-ids=71
>
>
> $ uname -a
> Linux vidar 2.6.38-bpo.2-amd64 #1 SMP Mon Jun 6 15:24:02 UTC 2011 x86_64
> GNU/Linux
>
>
> $ bmc-info
> Device ID : 32
> Device Revision : 1
> Device SDRs : unsupported
> Firmware Revision : 2.50
> Device Available : yes (normal operation)
> IPMI Version : 2.0
> Sensor Device : supported
> SDR Repository Device : supported
> SEL Device : supported
> FRU Inventory Device : supported
> IPMB Event Receiver : supported
> IPMB Event Generator : supported
> Bridge : unsupported
> Chassis Device : supported
> Manufacturer ID : Super Micro Computer Inc. (47488)
> Product ID : 1541
>
> GUID : 00000000-0000-0000-0000-000000000000
>
> Channel Information
>
> Channel Number : 0
> Medium Type : IPMB (I2C)
> Protocol Type : IPMB-1.0
> Active Session Count : 0
> Session Support : session-less
> Vendor ID : Intelligent Platform Management Interface forum (7154)
>
> Channel Number : 1
> Medium Type : 802.3 LAN
> Protocol Type : IPMB-1.0
> Active Session Count : 0
> Session Support : multi-session
> Vendor ID : Intelligent Platform Management Interface forum (7154)
>
> Channel Number : 3
> Medium Type : Asynch. Serial/Modem (RS-232)
> Protocol Type : IPMB-1.0
> Active Session Count : 0
> Session Support : single-session
> Vendor ID : Intelligent Platform Management Interface forum (7154)
>
> Channel Number : 5
> Medium Type : IPMB (I2C)
> Protocol Type : IPMB-1.0
> Active Session Count : 0
> Session Support : session-less
> Vendor ID : Intelligent Platform Management Interface forum (7154)
>
>
> $ ipmi-sensors -V
> ipmi-sensors - 1.0.5
> Copyright (C) 2003-2010 FreeIPMI Core Team
> This program is free software; you may redistribute it under the terms of
> the GNU General Public License. This program has absolutely no warranty.
>
>
> $ ipmi-sensors --flush-cache
> Flushing cache: /root/.freeipmi/sdr-cache/sdr-cache-vidar.localhost
>
>
> $ ipmi-sensors --interpret-oem-data --output-sensor-state
> Caching SDR repository information:
> /root/.freeipmi/sdr-cache/sdr-cache-vidar.localhost
> Caching SDR record 25 of 25 (current record ID 1612)
> ID | Name | Type | State | Reading | Units |
> Event
> 4 | System Temp | Temperature | Nominal | 55.00 | C |
> 'OK'
> 71 | CPU Temp | OEM Reserved | N/A | N/A | N/A |
> 'OEM Event = 0000h'
> 138 | FAN 1 | Fan | Nominal | 1325.00 | RPM |
> 'OK'
> 205 | FAN 2 | Fan | N/A | N/A | RPM | N/A
> 272 | FAN 3 | Fan | Nominal | 1140.00 | RPM |
> 'OK'
> 339 | FAN 4 | Fan | Nominal | 1140.00 | RPM |
> 'OK'
> 406 | FAN 5 | Fan | Nominal | 1325.00 | RPM |
> 'OK'
> 473 | CPU Vcore | Voltage | Nominal | 0.90 | V |
> 'OK'
> 540 | +3.3VCC | Voltage | Nominal | 3.26 | V |
> 'OK'
> 607 | +12 V | Voltage | Nominal | 12.14 | V |
> 'OK'
> 674 | CPU DIMM | Voltage | Nominal | 1.52 | V |
> 'OK'
> 741 | +5 V | Voltage | Nominal | 5.09 | V |
> 'OK'
> 808 | -12 V | Voltage | Nominal | -12.48 | V |
> 'OK'
> 875 | VBAT | Voltage | Nominal | 3.14 | V |
> 'OK'
> 942 | +3.3VSB | Voltage | Nominal | 3.25 | V |
> 'OK'
> 1009 | AVCC | Voltage | Nominal | 3.26 | V |
> 'OK'
> 1076 | Chassis Intru | Physical Security | Nominal | N/A | N/A |
> 'OK'
> 1143 | PS Status | Power Supply | N/A | N/A | N/A |
> 'Presence detected' 'Unrecognized Event = 0100h' 'Unrecognized Event = 0200h'
> 'Unrecognized Event = 0400h' 'Unrecognized Event = 0800h' 'Unrecognized Event
> = 1000h' 'Unrecognized Event = 2000h' 'Unrecognized Event = 4000h'
>
>
> $ ipmi-sensors --interpret-oem-data --output-sensor-state
> --ignore-not-available-sensors
> ID | Name | Type | State | Reading | Units |
> Event
> 4 | System Temp | Temperature | Nominal | 55.00 | C |
> 'OK'
> 71 | CPU Temp | OEM Reserved | N/A | N/A | N/A |
> 'OEM Event = 0000h'
> 138 | FAN 1 | Fan | Nominal | 1325.00 | RPM |
> 'OK'
> 272 | FAN 3 | Fan | Nominal | 1140.00 | RPM |
> 'OK'
> 339 | FAN 4 | Fan | Nominal | 1140.00 | RPM |
> 'OK'
> 406 | FAN 5 | Fan | Nominal | 1510.00 | RPM |
> 'OK'
> 473 | CPU Vcore | Voltage | Nominal | 0.90 | V |
> 'OK'
> 540 | +3.3VCC | Voltage | Nominal | 3.26 | V |
> 'OK'
> 607 | +12 V | Voltage | Nominal | 12.14 | V |
> 'OK'
> 674 | CPU DIMM | Voltage | Nominal | 1.53 | V |
> 'OK'
> 741 | +5 V | Voltage | Nominal | 5.09 | V |
> 'OK'
> 808 | -12 V | Voltage | Nominal | -12.48 | V |
> 'OK'
> 875 | VBAT | Voltage | Nominal | 3.14 | V |
> 'OK'
> 942 | +3.3VSB | Voltage | Nominal | 3.25 | V |
> 'OK'
> 1009 | AVCC | Voltage | Nominal | 3.26 | V |
> 'OK'
> 1076 | Chassis Intru | Physical Security | Nominal | N/A | N/A |
> 'OK'
> 1143 | PS Status | Power Supply | N/A | N/A | N/A |
> 'Presence detected' 'Unrecognized Event = 0100h' 'Unrecognized Event = 0200h'
> 'Unrecognized Event = 0400h' 'Unrecognized Event = 0800h' 'Unrecognized Event
> = 1000h' 'Unrecognized Event = 2000h' 'Unrecognized Event = 4000h'
>
>
> $ ipmi-sensors --interpret-oem-data --output-sensor-state -v --record-ids=71
> Record ID: 71
> ID String: CPU Temp
> Sensor Type: OEM Reserved (C0h)
> Sensor Number: 18
> IPMB Slave Address: 10h
> Sensor Owner ID: 20h
> Sensor Owner LUN: 0h
> Channel Number: 0h
> Entity ID: processor (3)
> Entity Instance: 1
> Entity Instance Type: Physical Entity
> Event/Reading Type Code: 70h
> Sensor State: N/A
> Sensor Event: 'OEM Event = 0000h'
>
>
> best regards
> David
>
>
> _______________________________________________
> Freeipmi-devel mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/freeipmi-devel
--
Albert Chu
address@hidden
Computer Scientist
High Performance Systems Division
Lawrence Livermore National Laboratory