Re: [Freeipmi-devel] Supermicro X9SCA-F-O CPU Temp OEM Sensor

[Gregyski]

Hi again Al,

That worked out perfectly:

$ sudo ipmi-sensors --interpret-oem-data --output-sensor-state 
--ignore-not-available-sensors --ignore-unrecognized-events -h HOSTIP -u 
USERNAME -p PASSWORD
ID   | Name          | Type              | State    | Reading    | 
Units | Event
4    | System Temp   | Temperature       | Nominal  | 32.00      | C    
| 'OK'
71   | CPU Temp      | OEM Reserved      | Nominal  | N/A        | N/A  
| 'Low'
272  | FAN 3         | Fan               | Nominal  | 1080.00    | RPM  
| 'OK'
473  | Vcore         | Voltage           | Nominal  | 1.00       | V    
| 'OK'
540  | 3.3VCC        | Voltage           | Nominal  | 3.36       | V    
| 'OK'
607  | 12V           | Voltage           | Nominal  | 12.30      | V    
| 'OK'
674  | VDIMM         | Voltage           | Nominal  | 1.50       | V    
| 'OK'
741  | 5VCC          | Voltage           | Nominal  | 5.09       | V    
| 'OK'
808  | -12V          | Voltage           | Nominal  | -12.06     | V    
| 'OK'
875  | VBAT          | Voltage           | Nominal  | 3.17       | V    
| 'OK'
942  | VSB           | Voltage           | Nominal  | 3.34       | V    
| 'OK'
1009 | AVCC          | Voltage           | Nominal  | 3.38       | V    
| 'OK'
1076 | Chassis Intru | Physical Security | Nominal  | N/A        | N/A  
| 'OK'
1143 | PS Status     | Power Supply      | Nominal  | N/A        | N/A  
| 'Presence detected'

Will freeipmi handle/report states other than "Nominal" and events 
other than "Low" as-is?  Or would I need to collect the same data when 
the system is in another state?

Thanks so much!
Greg

On 08.11.2011 17:14, Albert Chu wrote:
> Hi Greg,
>
> Unfortunately, since Supermicro's product ids are completely random, 
> I
> just have to add them as they arise.  I've having trouble uploading 
> to
> the download site, hopefully pulling from the SVN tree would be ok 
> for a
> quick test?
>
> svn co
>
> http://svn.savannah.gnu.org/svn/freeipmi/branches/Release-1_0_0_branch
>
> Remember to use the --interpret-oem-data option.
>
> Thanks,
>
> Al