Re: [Freeipmi-devel] Supermicro X9SCA-F-O CPU Temp OEM Sensor

[Albert Chu]

Hi Greg,

> Will freeipmi handle/report states other than "Nominal" and events 
> other than "Low" as-is?

Yes.  The states that can be reported are Low, Medium, High, and
Overheat.  The sensor state will be adjusted appropriately on different
readings (see /etc/freeipmi/freeipmi_interpret_sensor.conf).

> Or would I need to collect the same data when 
> the system is in another state?

I'm not quite sure what you're asking for here.

Al

On Wed, 2011-11-09 at 13:27 -0800, Gregyski wrote:
> Hi again Al,
> 
> That worked out perfectly:
> 
> $ sudo ipmi-sensors --interpret-oem-data --output-sensor-state 
> --ignore-not-available-sensors --ignore-unrecognized-events -h HOSTIP -u 
> USERNAME -p PASSWORD
> ID   | Name          | Type              | State    | Reading    | 
> Units | Event
> 4    | System Temp   | Temperature       | Nominal  | 32.00      | C    
> | 'OK'
> 71   | CPU Temp      | OEM Reserved      | Nominal  | N/A        | N/A  
> | 'Low'
> 272  | FAN 3         | Fan               | Nominal  | 1080.00    | RPM  
> | 'OK'
> 473  | Vcore         | Voltage           | Nominal  | 1.00       | V    
> | 'OK'
> 540  | 3.3VCC        | Voltage           | Nominal  | 3.36       | V    
> | 'OK'
> 607  | 12V           | Voltage           | Nominal  | 12.30      | V    
> | 'OK'
> 674  | VDIMM         | Voltage           | Nominal  | 1.50       | V    
> | 'OK'
> 741  | 5VCC          | Voltage           | Nominal  | 5.09       | V    
> | 'OK'
> 808  | -12V          | Voltage           | Nominal  | -12.06     | V    
> | 'OK'
> 875  | VBAT          | Voltage           | Nominal  | 3.17       | V    
> | 'OK'
> 942  | VSB           | Voltage           | Nominal  | 3.34       | V    
> | 'OK'
> 1009 | AVCC          | Voltage           | Nominal  | 3.38       | V    
> | 'OK'
> 1076 | Chassis Intru | Physical Security | Nominal  | N/A        | N/A  
> | 'OK'
> 1143 | PS Status     | Power Supply      | Nominal  | N/A        | N/A  
> | 'Presence detected'
> 
> Will freeipmi handle/report states other than "Nominal" and events 
> other than "Low" as-is?  Or would I need to collect the same data when 
> the system is in another state?
> 
> Thanks so much!
> Greg
> 
> On 08.11.2011 17:14, Albert Chu wrote:
> > Hi Greg,
> >
> > Unfortunately, since Supermicro's product ids are completely random, 
> > I
> > just have to add them as they arise.  I've having trouble uploading 
> > to
> > the download site, hopefully pulling from the SVN tree would be ok 
> > for a
> > quick test?
> >
> > svn co
> > 
> > http://svn.savannah.gnu.org/svn/freeipmi/branches/Release-1_0_0_branch
> >
> > Remember to use the --interpret-oem-data option.
> >
> > Thanks,
> >
> > Al
> >
> 
-- 
Albert Chu
address@hidden
Computer Scientist
High Performance Systems Division
Lawrence Livermore National Laboratory