freeipmi-users
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Freeipmi-users] Freeipmi 0.4.3 Problem reading Intel mBMC onSE


From: Bala.A
Subject: Re: [Freeipmi-users] Freeipmi 0.4.3 Problem reading Intel mBMC onSE7320SP2
Date: Wed, 29 Aug 2007 06:45:15 -0700 (PDT)
User-agent: SquirrelMail/1.4.9a

Hi Uli,

The output of bmc-info shows FreeIPMI SSIF driver works in your machine. 
Please compile freeipmi with debug option enabled

./configure --enable-trace --enable-debug
make
make install

Then, run ipmi-sensors with debug option by

ipmi-sensors -f
ipmi-sensors --debug

and send me the output.  I will check it here.

Thanks,

Regards,
Bala
---
Free as in freedom
http://www.gnu.org/

> Hi Al,
>
> KCS-Driver won't work
> the mBMC PC87431M needs SSIF.......
>
>
> i hope anyone would provide me some hints how to Debug and where to
start...
>
> Uli
> ----- Original Message -----
> From: "Al Chu" <address@hidden>
> To: "Schäfer Raumgestaltung" <address@hidden> Cc:
<address@hidden>; <address@hidden>; <address@hidden> Sent:
Tuesday, August 28, 2007 6:09 PM
> Subject: Re: [Freeipmi-users] Freeipmi 0.4.3 Problem reading Intel mBMC
onSE7320SP2
>
>
>> Hi Ulrich,
>> I've personally never used/developed on the SSIF driver.  I've CCed a
few folks that might have a better idea on those details.
>> Have you tried the KCS driver?
>> Al
>> On Sat, 2007-08-25 at 07:43 +0200, Schäfer Raumgestaltung wrote:
>> > Big trouble in little China....
>> >
>> > Board: Intel SE7320Sp2
>> >            mBMC PC87431M
>> >
>> > Distro: Opensuse 10.2 (Kernel 2.6.18)
>> >            Arch: x86_64
>> >
>> >
>> > Done so far:
>> >
>> > built Freeipmi 0.4.3 RPM from Sources (thanks to Opensuse
>> Buildservice)
>> >
>> > Trying to read Sensor-Values like....
>> >
>> > >ipmi-sensors -D ssif --driver-device /dev/i2c-0  --driver-address
>> 0x42
>> >
>> > Fetching SDR repository Information ...done
>> > FAILED: Retrieval of SDR record 0x0ord ID 0)
>> >
>> > SDR Cache creation failed: internal_error
>> > ..... or somtimes (until flushing Cache with -f)
>> > SDR Cache creation failed: ipmi_communication_error
>> >
>> >
>> > any hints what's going wrong ??
>> >
>> >
>> > attached: some "Diagnostic"
>> >
>> > >lsmod |grep i2c
>> >
>> > i2c_dev                28168  0
>> > i2c_i801               25364  0
>> > i2c_core               41472  2 i2c_dev,i2c_i801
>> >
>> >
> ============================================================================
===========================
>> >
>> > >i2cdetect -l 0
>> >
>> > i2c-0   smbus           SMBus I801 adapter at 0400
>> Non-I2C
> SMBus adapter
>> >
>> >
> ============================================================================
===========================
>> > >ipmi-locate
>> >
>> >
>> > Probing KCS device using DMIDECODE... FAILED
>> >
>> > Probing SMIC device using DMIDECODE... FAILED
>> >
>> > Probing BT device using DMIDECODE... FAILED
>> >
>> > Probing SSIF device using DMIDECODE... done
>> > IPMI Version: 1.5
>> > IPMI locate driver: DMIDECODE
>> > IPMI interface: SSIF
>> > BMC driver device: /dev/i2c-0
>> > BMC SMBUS slave address: 42
>> > Register space: 1
>> >
>> > Probing KCS device using SMBIOS... FAILED
>> >
>> > Probing SMIC device using SMBIOS... FAILED
>> >
>> > Probing BT device using SMBIOS... FAILED
>> >
>> > Probing SSIF device using SMBIOS... done
>> > IPMI Version: 1.5
>> > IPMI locate driver: SMBIOS
>> > IPMI interface: SSIF
>> > BMC driver device: /dev/i2c-0
>> > BMC SMBUS slave address: 84
>> > Register space: 1
>> >
>> > Probing KCS device using ACPI... FAILED
>> >
>> > Probing SMIC device using ACPI... FAILED
>> >
>> > Probing BT device using ACPI... FAILED
>> >
>> > Probing SSIF device using ACPI... FAILED
>> >
>> > Probing KCS device using PCI... FAILED
>> >
>> > Probing SMIC device using PCI... FAILED
>> >
>> > Probing BT device using PCI... FAILED
>> >
>> > Probing SSIF device using PCI... FAILED
>> >
>> > KCS device default values:
>> > IPMI Version: 1.5
>> > IPMI locate driver: DEFAULT
>> > IPMI interface: KCS
>> > BMC driver device:
>> > BMC I/O base address: CA2
>> > Register space: 1
>> >
>> > SMIC device default values:
>> > IPMI Version: 1.5
>> > IPMI locate driver: DEFAULT
>> > IPMI interface: SMIC
>> > BMC driver device:
>> > BMC I/O base address: CA9
>> > Register space: 1
>> >
>> > BT device default values:
>> >
>> > SSIF device default values:
>> > IPMI Version: 1.5
>> > IPMI locate driver: DEFAULT
>> > IPMI interface: SSIF
>> > BMC driver device: /dev/i2c-0
>> > BMC SMBUS slave address: 42
>> > Register space: 1
>> >
>> >
> ============================================================================
===========================
>> >
>> > >ipmi-raw -D ssif --driver-device /dev/i2c-0 0 6 1
>> >
>> > rcvd: 01 00 20 81 02 40 51 9F 22 03 00 11 43
>> >
>> >
> ============================================================================
===========================
>> >
>> >
>> >
>> > >bmc-info  -D ssif --driver-device /dev/i2c-0  --driver-address 0x42
>> >
>> > Device ID:         20
>> > Device Revision:   1
>> >                    [SDR Support]
>> > Firmware Revision: 2.64
>> >                    [Device Available (normal operation)]
>> > IPMI Version:      1.5
>> > Additional Device Support:
>> >                    [Sensor Device]
>> >                    [SDR Repository Device]
>> >                    [SEL Device]
>> >  [FRU Inventory Device]
>> >                    [IPMB Event Receiver]
>> >                    [Chassis Device]
>> > Manufacturer ID:   322h
>> > Product ID:        4311h
>> > Aux Firmware Revision Info: 0h
>> > Channel Information:
>> >        Channel No: 1
>> >       Medium Type: 802.3 LAN
>> >     Protocol Type: IPMB-1.0
>> >        Channel No: 2
>> >       Medium Type: System Interface (KCS, SMIC, or BT)
>> >     Protocol Type: IPMI-SMBus
>> >
> ============================================================================
===========================
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
> ''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
'''''''''''''''''''''''''
>> > Ulrich Schäfer
>> >
> ''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
''''''''''''''''''''''''
>> > _______________________________________________
>> > Freeipmi-users mailing list
>> > address@hidden
>> > http://lists.gnu.org/mailman/listinfo/freeipmi-users
>> >
>> --
>> Albert Chu
>> address@hidden
>> 925-422-5311
>> Computer Scientist
>> High Performance Systems Division
>> Lawrence Livermore National Laboratory
>
>
>
> _______________________________________________
> Freeipmi-users mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/freeipmi-users
>










reply via email to

[Prev in Thread] Current Thread [Next in Thread]