freeipmi-users
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Freeipmi-users] Problem with ipmi-sensors version 0.6.6


From: Rohit Jog
Subject: Re: [Freeipmi-users] Problem with ipmi-sensors version 0.6.6
Date: Tue, 9 Sep 2008 16:54:45 +0530

Hello people,Here are the output of various ipmi commands ..
---------------------------------------------------------------------------------------------------------------------------------------------------
address@hidden ~]# ipmi-sensors
2: ambienttemp (Temperature): 21.60 C (NA/40.20): [OK]
3: bulk.v12-0-s0 (Voltage): 12.18 V (10.20/13.80): [OK]
4: bulk.v12-1-s0 (Voltage): 12.18 V (10.20/13.80): [OK]
5: bulk.v1_8-s0 (Voltage): 1.80 V (1.68/2.04): [OK]
6: bulk.v1_8-s5 (Voltage): 1.80 V (1.68/2.04): [OK]
7: bulk.v2_5-s0 (Voltage): 2.52 V (2.28/2.76): [OK]
8: bulk.v2_5-s5 (Voltage): 2.52 V (2.28/2.76): [OK]
9: bulk.v3_3-s0 (Voltage): 3.36 V (3.00/3.60): [OK]
10: bulk.v3_3-s3 (Voltage): 3.36 V (3.00/3.60): [OK]
11: bulk.v3_3-s5 (Voltage): 3.36 V (3.00/3.60): [OK]
12: bulk.v5-s0 (Voltage): 5.04 V (4.50/5.52): [OK]
13: bulk.v5-s5 (Voltage): 5.04 V (4.50/5.52): [OK]
14: cpu0.dietemp (Temperature): 37.20 C (NA/73.20): [OK]
15: cpu0.memtemp (Temperature): 29.40 C (NA/55.20): [OK]
16: cpu0.temp (Temperature): 28.80 C (NA/60.00): [OK]
17: cpu0.v2_5-s0 (Voltage): 2.52 V (2.28/2.76): [OK]
18: cpu0.v2_5-s3 (Voltage): 2.52 V (2.28/2.76): [OK]
19: cpu0.vcore-s0 (Voltage): 1.56 V (0.72/1.68): [OK]
20: cpu0.vldt1 (Voltage): 1.20 V (1.08/1.32): [OK]
21: cpu0.vldt2 (Voltage): 1.20 V (1.08/1.32): [OK]
22: cpu0.vtt-s3 (Voltage): 1.32 V (1.08/1.32): [OK]
23: cpu1.dietemp (Temperature): 36.00 C (NA/73.20): [OK]
24: cpu1.memtemp (Temperature): 27.00 C (NA/60.00): [OK]
25: cpu1.temp (Temperature): 27.00 C (NA/60.00): [OK]
26: cpu1.v2_5-s3 (Voltage): 2.52 V (2.28/2.76): [OK]
27: cpu1.vcore-s0 (Voltage): 1.56 V (0.72/1.68): [OK]
28: cpu1.vtt-s3 (Voltage): 1.20 V (1.08/1.32): [OK]
29: fan1.tach (Fan): 14760.00 RPM (1980.00/NA): [OK]
30: fan2.tach (Fan): 14700.00 RPM (1980.00/NA): [OK]
31: fan3.tach (Fan): 15060.00 RPM (1980.00/NA): [OK]
32: fan4.tach (Fan): 14820.00 RPM (1980.00/NA): [OK]
33: fan5.tach (Fan): 15300.00 RPM (1980.00/NA): [OK]
34: fan6.tach (Fan): 15300.00 RPM (1980.00/NA): [OK]
35: g.vldt1 (Voltage): 1.20 V (1.08/1.32): [OK]
36: gbeth.temp (Temperature): 30.00 C (NA/60.00): [OK]
37: golem.temp (Temperature): 31.20 C (NA/60.00): [OK]
38: hddbp.temp (Temperature): 24.00 C (NA/60.00): [OK]
39: sp.temp (Temperature): 31.80 C (NA/60.00): [OK]
40: thor.temp (Temperature): 30.00 C (NA/60.00): [OK]
ipmi_cmd_get_sensor_reading_discrete: bad completion code: request
data/parameter invalid
address@hidden ~]#
---------------------------------------------------------------------------------------------------------------------------------------------------

address@hidden ~]# ipmi-locate
Probing KCS device using DMIDECODE... done
IPMI Version: 1.5
IPMI locate driver: DMIDECODE
IPMI interface: KCS
BMC driver device:
BMC I/O base address: 0xA2
Register spacing: 1

Probing SMIC device using DMIDECODE... FAILED
Probing BT device using DMIDECODE... FAILED
Probing SSIF device using DMIDECODE... FAILED
Probing KCS device using SMBIOS... done
IPMI Version: 1.5
IPMI locate driver: SMBIOS
IPMI interface: KCS
BMC driver device:
BMC I/O base address: 0xA2
Register spacing: 1

Probing SMIC device using SMBIOS... FAILED
Probing BT device using SMBIOS... FAILED
Probing SSIF device using SMBIOS... FAILED
Probing KCS device using ACPI... FAILED
Probing SMIC device using ACPI... FAILED
Probing BT device using ACPI... FAILED
Probing SSIF device using ACPI... FAILED
Probing KCS device using PCI... FAILED
Probing SMIC device using PCI... FAILED
Probing BT device using PCI... FAILED
Probing SSIF device using PCI... FAILED
KCS device default values:
IPMI Version: 1.5
IPMI locate driver: DEFAULT
IPMI interface: KCS
BMC driver device:
BMC I/O base address: 0xCA2
Register spacing: 1

SMIC device default values:
IPMI Version: 1.5
IPMI locate driver: DEFAULT
IPMI interface: SMIC
BMC driver device:
BMC I/O base address: 0xCA9
Register spacing: 1

BT device default values:
SSIF device default values:
IPMI Version: 1.5
IPMI locate driver: DEFAULT
IPMI interface: SSIF
BMC driver device: /dev/i2c-0
BMC SMBUS slave address: 0x42
Register spacing: 1
---------------------------------------------------------------------------------------------------------------------------------------------------

address@hidden ~]# ipmimonitoring
ipmi_monitoring_sensor_readings_by_record_id: internal IPMI error
address@hidden ~]#

----------------------------------------------------------------------------------------------------------------------------------------------------

Here is the output of lspci
address@hidden ~]# lspci
00:06.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8111 PCI (rev 07)
00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-8111 LPC (rev 05)
00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-8111 IDE (rev 03)
00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-8111 ACPI (rev 05)
00:0a.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev
12)
00:0a.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01)
00:0b.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev
12)
00:0b.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM
Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control
00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration
00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map
00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM
Controller
00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control
01:00.0 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB (rev 0b)
01:00.1 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB (rev 0b)
01:05.0 VGA compatible controller: Trident Microsystems Blade 3D PCI/AGP
(rev 3a)
02:02.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5703X Gigabit
Ethernet (rev 02)
02:03.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5703X Gigabit
Ethernet (rev 02)
02:04.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X
Fusion-MPT Dual Ultra320 SCSI (rev 08)
02:05.0 Fibre Channel: QLogic Corp. QLA2300 64-bit Fibre Channel Adapter
(rev 01)
03:01.0 PCI bridge: IBM PCI-X to PCI-X Bridge (rev 02)
04:04.0 Ethernet controller: Intel Corporation 82546EB Gigabit Ethernet
Controller (rev 01)
04:04.1 Ethernet controller: Intel Corporation 82546EB Gigabit Ethernet
Controller (rev 01)
04:06.0 Ethernet controller: Intel Corporation 82546EB Gigabit Ethernet
Controller (rev 01)
04:06.1 Ethernet controller: Intel Corporation 82546EB Gigabit Ethernet
Controller (rev 01)
Machine is a SUN machine, and its model is V20Z.
Sorry, I initially thought that the machine is Dell Machine, but is seems
that machine from SUN.


-- 
Thanks and Regards,
Rohit JogSymantec Corporation
Storage Availability Management Group
Pune, India 411052
Mob: +91-9890942024


reply via email to

[Prev in Thread] Current Thread [Next in Thread]