[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Freeipmi-users] ipmiconsole output non human-readable data on Tyan

From: Albert Chu
Subject: Re: [Freeipmi-users] ipmiconsole output non human-readable data on Tyan FT77AB7059
Date: Fri, 17 Oct 2014 14:34:52 -0700

Asked a guy in my hall for a guess.  He thinks it could be a baud rate
mismatch?  With serial over lan, the baud rate you put in the kernel, in
the bios, and configure via IPMI must all be the same.


On Thu, 2014-10-16 at 19:29 +0400, Григорий Пташко wrote:
> Hello.
> I've got a problem with getting the human-readable output from ipmiconsole.
> I use it a lot during my expriments with PXE booting my servers.
> I've got two types of platforms: Supermicro and Tyan. On the Supermicro
> platform the command
> $ ipmiconsole -h host -u user -p password
> gives a completely human-readable output. But on the Tyan platform it gives
> the following (I'm attaching a screenshot, it's not big):
> <>
> My Tyan platform model is FT77AB7059. Here's its web page
> Using the standard JViewer that is shipped with the Tyan platform's BMC web
> interface is OK. I see human-readable output. But ipmiconsole show garbage.
> Also, here's the kernel's cmdline for my PXE boot and the SERIAL option
> from the
> pxelinux.cfg/default. There are some serial properties that might help:
> SERIAL 0 115200
> APPEND xen.gz console=com0 com0=115200,8n1 --- bzImage ...
> console=ttyS0,115200n8 console=tty0  --- initrd.img
> I've removed everything except the logging to console options.
> What can be the problem for ipmiconsole?
> Thank you.
Albert Chu
Computer Scientist
High Performance Systems Division
Lawrence Livermore National Laboratory

reply via email to

[Prev in Thread] Current Thread [Next in Thread]