[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Freeipmi-users] ipmiconsole output non human-readable data on Tyan
Re: [Freeipmi-users] ipmiconsole output non human-readable data on Tyan FT77AB7059
Sat, 18 Oct 2014 01:47:05 +0400
I will double check this.
2014-10-18 1:34 GMT+04:00 Albert Chu <address@hidden>:
> Asked a guy in my hall for a guess. He thinks it could be a baud rate
> mismatch? With serial over lan, the baud rate you put in the kernel, in
> the bios, and configure via IPMI must all be the same.
> On Thu, 2014-10-16 at 19:29 +0400, Григорий Пташко wrote:
> > Hello.
> > I've got a problem with getting the human-readable output from
> > I use it a lot during my expriments with PXE booting my servers.
> > I've got two types of platforms: Supermicro and Tyan. On the Supermicro
> > platform the command
> > $ ipmiconsole -h host -u user -p password
> > gives a completely human-readable output. But on the Tyan platform it
> > the following (I'm attaching a screenshot, it's not big):
> > http://goo.gl/console=tty0q1oI63 <http://goo.gl/q1oI63>
> > My Tyan platform model is FT77AB7059. Here's its web page
> > http://goo.gl/SzhjdB.
> > Using the standard JViewer that is shipped with the Tyan platform's BMC
> > interface is OK. I see human-readable output. But ipmiconsole show
> > Also, here's the kernel's cmdline for my PXE boot and the SERIAL option
> > from the
> > pxelinux.cfg/default. There are some serial properties that might help:
> > SERIAL 0 115200
> > APPEND xen.gz console=com0 com0=115200,8n1 --- bzImage ...
> > console=ttyS0,115200n8 console=tty0 --- initrd.img
> > I've removed everything except the logging to console options.
> > What can be the problem for ipmiconsole?
> > Thank you.
> Albert Chu
> Computer Scientist
> High Performance Systems Division
> Lawrence Livermore National Laboratory
+7 (916) 1489766